Welded Steel Pipe

As2556-2000 Electric resistance welded steel air heater tubes Products Description 1 SCOPE This Standard specifies requirements for electric resistance welded steel tubes in the as-welded condition intended for use in air heaters. NOTE: Purchasing guidances are given in Appendix A. 2 APPLICATION This Standard is intended as a design guide for use by manufacturers of air heating exchangers. 3 REFERENCED DOCUMENTS The following Standards are referred to in this Standard: AS or

GB/T24187 Cold Drawn Precision Welded Steel Coil Tubes for Condenser Spec: Material:C Si Mn P S Size Range:OD:3.18-18mm WT:0.5-1.2mm General Length:1-200m Tolerance: According to the following tables or customers’ request. Table 1 Outer diameter, wall thickness and theoretical weight OD/mm WT/mm 0.30 0.40 0.50 0.60 0.65 0.70 0.80 0.90 1.00 1.30 theoretical weight /(kg/m) 3.18 0.0213 0.0274 0.0330 4.00 0.0274 0.0355 0.0432 0.0503 4.76 0.0330 0.0430 0.0525 0.0616 0.0659 0.0701

JIS G3472 STAM290GA STAM390G Electric resistance welded carbon steel tubes for automobile This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes designed to be used for automobiles (hereafter referred to as tubes). This Standard is generally applicable to the tubes in the range of 15.9 mm to 101.6 mm in outside diameter. Manufacturing method The manufacturing method shall be as follows. a) The tube shall be manufactured from hot rolled

EN10305-2 E155,E195,E235,E275,E355 Welded Cold Drawn DOM Steel Tubes Steel Grade/Steel Material: E155 E195 E235 E275 E355 Delivery Condition: 1 BK Cold finished(hard) 2 BKW Cold finished(soft) 3 BKS Cold finished and stress-relieved 4 GBK Annealed 5 NBK Normalized Size Range: O.D.:6-350mm W.T.:1-35mm L:max12000mm Characteristic: Good concentricity Good OD and ID tolerance High precision Stable quality Smooth roughness DOM Steel Tube Production Process: Raw material → Incoming

Welded Steel Tubes,ASTM A513 1010/1020/4130 ERW Carbon and Alloy Steel Mechanical Tubing Specifications Standard: ASTM A513 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing Material: ASTM A513 1008 1010 1015 1020 ect. Application: 1.Mechanical Tube 2. Casing Tube 3. Boiler Pipe 4. Petroleum and natural gas industry 5. Chemistry industry Surface Treatment: 1.Bared 2.Black Painted (varnish coating) 3.Galvanized 4.Oiled 5.PE,3PE, FBE

ASTM A178 ERW carbon steel and carbon manganese steel boiler and superheater tubes,boiler tube/pipeMaterial: Carbon steel and carbon manganese steelProduction: Electric Resistance WeldingSize range: O.D.: 12.7-127mm W.T.:0.9-9.1mm L: according to customer requirementApplications: For Boilers, Superheaters, Heat-Exchangers, Condensers, Boiler flues, Superheater flues and Safe ends Heat treatment:After welding, all tubes are heat treated at a temperature of 1650℉ (900℃) or

ASTM A178 Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Steel Tube Application:boiler tubes,boiler flues,superheater flues and safe ends. Size:L--4~12m OD--12.7-127mm WT--0.9-9.1mm Grade:Type A,C and D Manufacture :electric-resistance welding. Heat Treatment:After welding,all tubes shall be heat treated at a temperature of 1650°F[900℃]or higher and followed by cooling in air or in the cooling chamber of a controlled-atmosphere

Products Description New Era ASTM A36 Round 8 inch Schedule 40 Hot Galvanized Carbon Steel Pipe for Low Pressure Liquid Delivery Key Word Hot Galvanized Carbon Steel Pipe Standard GB / T3091, GB/T13793, GB/T6728, BS1387, EN10219, ASTM A53/A53M, PNS, Q/12JH4855, Q/12JH5081 Material Q195, Q215, Q235, Q345, S185, S235, S355, SS330, SS400, 10#, 20#, 35#, L175, L210, L245, L290, L320, L360, L390, L415, L450, L485, L555,etc Size OD: 1/2" to 24" (19mm-610mm) WT: 0.8-30mm Length: 1

SA-178/SA-178M Grade A C D electric-resistance-welded steel pipe , steel boiler and superheater tubes SPECIFICATION FOR ELECTRIC-RESISTANCEWELDED CARBON STEEL AND CARBON-MANGANESE STEEL BOILER AND SUPERHEATER TUBES 1. Scope 1.1 This specification covers minimum-wall-thickness,electric-resistance-welded tubes made of carbon steel and carbon-manganese steel intended for use as boiler tubes,boiler flues, superheater flues, and safe ends. NOTE 1 — Type C and D tubes are not

1. Product Name: ASTM A178 Electric Resistance Welded Carbon Steel and Manganese Steel Boiler and Superheater Tubes 2. Size Range: OD: 12.7-127mm, WT: 0.9-9.1mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. High Preformance and Longer Working Life Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line

1. Product Name: DIN2393 RSt37-2 St42-2 St52-3 Precision Welded Steel Pipe for with Uniform Concentricity2. Size Range: OD: 6-88mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m3. Stable Quality with Comeptitive Price4. Good Extending and Bending Ability Product NameDIN2393 Precision Welded Cold Drawn Steel PipeMaterialRSt34-2, RSt37-2, St44-2, St52-3Delivery ConditionBK, BKW, BKS, GBK, NBKStandardDIN2393Size RangeOD: 6-88mm, WT: 1-10mmApplicationHigh precision purpose, auto

EN10305-2 Cold Drawn Welded Precision Steel Pipe Size Range: OD: 6-88mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m Stable Quality with Comeptitive Price Good Extending and Bending Ability EN10305-2 Welded Precision Steel pipe, is produced by cold drawing over mandrel and die on the ERW welded steel tube, to achieve better tolerance and good concentricity, both outside and inside weld seam is completely removed during the cold drawing process. Application: Automobile shock

EN10305-2 Cold Drawn Welded Precision Steel Pipe CDW for high quality purpose EN10305-2 Rigid Mandrel Welded Steel Pipe Size Range: OD: 6-168mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m Stable Quality with Comeptitive Price Good Extending and Bending Ability EN10305-2 Welded Precision Steel pipe, is produced by cold drawing over mandrel and die on the ERW welded steel tube, to achieve better tolerance and good concentricity, both outside and inside weld seam is completely