Electrical Appliance Testing Equipment

IEC 60065 Intelligent Compression Testing Equipment For Pressure Tests And Crush Tests Product Overview: This machine is the most direct test instrument for verifying the compressive strength of cartons or other packaging containers. It is used to determine the compressive strength of cartons, and can be used for steady pressure tests and crush tests. The results of the tests can be used as an important reference for the height of the finished product containers at the

IEC 60950-1 Intelligent Crush Testing Equipment For Compressive Endurance Test Product Overview For Intelligent Crush Testing Equipment: This machine is the most direct test instrument for verifying the compressive strength of cartons or other packaging containers. It is used to determine the compressive strength of cartons, and can be used for steady pressure tests and crush tests. The results of the tests can be used as an important reference for the height of the finished

Transport Simulation Vibration Test table Of Packaged Goods Transport Simulation Tester Product Overview Simulation transport vibration table, also known as "vibration table", simulate the damage caused by the turbulence of the product during automobile transportation, to identify whether the product is able to withstand environmental vibration, suitable for electronic, mechanical and electrical, optoelectronics, motor vehicles, toys and other industries of research,

IEC 60335-2-31 Figure 101 6 Burners Electric Stoves Setup With Power Regulators Product Information: This test setup is designed and manufactured according to the requirements of Chapter 11 and Figure 101) in IEC 60335-2-31 standards. Including EGO stove imported from Germany, electrical control with power regulator, and aluminum bracket. Technical Parameters: 1. Working power supply: 220V, 60Hz, the equipment power is about 10500W. 2. Electric heating power: 6 electric

IEC 60335-1 Automatic Endurance Test Device Cord Reels Flexible Cord Withdrawn Test Product information: This test equipment meets the requirements of IEC 60335-1 Clause 22.16 Application: It is used to check the automatic cord reels shall be constructed so that they do not cause – undue abrasion or damage to the sheath of the flexible cord; – breakage of conductor strands; – undue wear of contacts. Test sample: Automatic cord reels of household appliances and similar

IEC 60335-1 Clause 22.48 Anti-Inverted Siphon Test Device For Anti-Siphonage Performance Test Product overview: This Anti-inverted siphon test device meets the requirements of IEC 60335-1 clause 22.48. It is used for anti-siphonage performance test of water inlet valves for appliances (such as washing machines) intended to be connected to the water mains for household and similar purposes. The vacuum system of the equipment simulates the vacuum condition of the water supply

IEC 60335-2-81 Figure 101 Equipment For The Flexing Test For Foot Warmers Product overview: The foot warmers flexing test equipment is designed and manufactured according to IEC 60335-2-81 clause 21.101 and figure 101. This test equipment is used to test whether the foot area of the foot warmer or the heating area of the heating mat can withstand the mechanical strength. After the test equipment is started, the testing will be started automatically, and the testing will be

IEC 60335-2-2 Clause 21.101 Current-Carrying Hoses Comprehensive Test Equipment Product Information Standard: IEC60335-2-2:2009 ”Household and similar electrical appliances-Safety-Part2-2:Particular requirements for vacuum cleaners and water-suction cleaning appliances, IDT” clause 21.101, 21.102, 21.103, 21.104. Specimen and limitations: Vacuum cleaner hoses, water suction cleaning appliance hoses, washing machine hoses Test purpose: Used to assess the mechanical strength of

Appendix F of TÜV Rheinland 2Pfg 2577/08.16 Robot Cable Bending Testing Machine Product Information: Standard: Appendix F of TÜV Rheinland 2Pfg2577/08.16 "Requirements for cables used in robot system" Specimen and limitations: Industrial robot cables. Test purpose: Used to test the bending resistance of the power cord of industrial robot cables when entering the joint. Test principle: Using PLC control and servo motor drive, the bending test of industrial robot cables is

ISO23953-2 Vertical Refrigerator Door Opening And Closing Testing Machine Durability Test System overview: The vertical refrigerator door opening and closing test machine is designed and manufactured according to Chapter 5.3.3.2 of ISO 23953-2:2015(E) and customer-specific requirements. It is used for the vertical door opening and closing durability test of vertical refrigerators, also used to match the door opening and closing actions during energy efficiency performance of

IEC 60335-2-36 Mechanical Durability Test Device For Commercial Induction Cookers Product information: The test equipment conforms to the standard requirements of IEC60335-2-36 clause 18.101. The equipment is used to verify the equipment equipped with induction heating source. The structure should be able to guarantee 100,000 times of normal use without failure that may weaken the requirements of this part. The insulation should not be damaged and the connections should not

IEC 60335-2-36 Clause 18.102 Commercial Induction Cooker Heat Resistance Test Device Product information: The test equipment conforms to the standard requirements of IEC60335-2-36 clause 18.102.The equipment is used to verify appliances equipped with glass ceramics or similar surface materials. The structure should be able to ensure the thermal stress occurring in normal use. And after 500 cycles of use, the surface water overflow resistance of the product, the heat

IEC 60335-2-23 Power Cord Flexibility Test Equipment PLC Control With Universal Fixtures Product Information: Standard applied: IEC60335-1 clause 23.3 and 25.14, IEC 60335-2-23 clause 23.3 and 11.101. Test sample: Small household appliances (such as coffee pot, electric iron, toaster, luminaires and etc.), and skin or hair care appliances. Feature: The test device adopts to PLC electrical control, 7-inch color touch screen intelligent operation system; servo motor controlling

IEC 60335-2-14 Cordless Kettles Irons Blenders Stand and Withdrawn Endurance Test Apparatus Product information: Standard: IEC60335-2-3:2015 “Household and similar electrical appliances-Safety-Part2-3: Particular requirements for electric irons” clause 22.105 IEC60335-2-14:2016 “Household and similar electrical appliances-Safety-Part2-14: Particular requirements for kitchen machines” clause 22.103 IEC60335-2-15:2016 “Household and similar electrical appliances-Safety-Part2-15

AC Constant Current Source Output Current 100A SPWM High Frequency Pulse Product overview: The AC constant current source adopts SPWM high frequency pulse width pulse width modulation, IGBT realizes the output, can modulate the output current and frequency, has a fast response speed, high constant current accuracy, and long-term stable operation. And it can overcome current changes caused by grid voltage fluctuations, loop resistance changes, and product internal resistance

IEC 60335-2-3 Figure 103 Feeler Gauge Testing Equipment Stainless Steel Material Standard: This feeler gauge meets the standard of Conforms to IEC 60335-2-3 Clause 22.13 and figure 103. Technical parameters: Test Method: 22.13 Replacement: Appliances shall be constructed so that when handles are gripped in normal use, contact is unlikely between the operator's hand and parts that could be unintentionally touched having a temperature rise exceeding the value specified in Table

IEC 60950 Plug Pin Torque And Pull Device For Verify The Securement Of Devices Pins Of Sockets Product overview: The device conforms to IEC60065:2014 clause 15.4.3 b) and c), IEC60950, IEC 60335, etc. It is used to verify the securement of devices with pins for insertion into fixed sockets. The device has good sensitivity, convenient adjustment, simple operation, beautiful appearance, and strong practicality. Technical Parameters Name Plug Pin Torque And Pull Device Standards

IEC 60335-1 Clause 25.15 Cord Anchorage Pull Force And Torque Tester PLC Control Product information: The Cord Anchorage Force and Torque Test Equipment is designed and manufactured according to the standard requirements of IEC60884-1 clause 23.2, IEC60745-1:2006, IEC60335-1 clause 25.15, IEC60598-1 clause 5.2.10.3, IEC60065 clause 16.5 and etc. The tester is used to conduct two tests of tension and torque at the terminals of appliances (lamps) with power cords, appliances

Defrosting Test Apparatus For Water Evaporation For Accumulation Of Frost IEC 60335-2-14 Product Information: The apparatus for water evaporation for accumulation of frost is designed in accordance with IEC 60335-2-24 clause 11.102 and Annex BB (figure BB.1). Samples and Restrictions: Refrigerating appliances, such as refrigerators, ice-cream appliances and ice-makers. Application: It is used for water evaporation for accumulation of frost. Technical Parameters: Power Supply

IEC60335-1 Pin Torque Test Apparatus For Function Of Force Borne By Detection Device Standards and Application For Pin Torque Test Apparatus: The device conforms to IEC60065:2014 clause 15.4.3 b) and c), IEC60950, IEC 60335, etc. It is used to verify the securement of devices with pins for insertion into fixed sockets. The device has good sensitivity, convenient adjustment, simple operation, beautiful appearance, and strong practicality. Technical Parameters For Pin Torque