Electrical Appliance Testing Equipment

Product Information: The Internal Wiring Flexing Test Equipment is designed and manufactured according to the standard requirements of Clause 23.3 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements. It is used to conduct flexing resistance test on the electrical connections and internal wires of different parts of the appliance that can move with each other in normal

IEC60335 Negative Pressure Vacuum Pressure Test System For Electrical Skin Stimulators Product overview: This Negative Pressure Vacuum Pressure Test System for beauty care appliances conforms to IEC 60335-2-113: 2016. It is suitable for verifying the outlet air vacuum pressure of appliances with vacuum or negative pressure function in electrical skin stimulators, and it shall not be greater than the vacuum pressure required by the standard to protect the human body from

Applied standards:The electrical design meets the standard of GB4706.1, GB4943, GB7000.1, GB3883.1, and GB / T12113, as well as the international electrical committee standards such as IEC60335-1, IEC60950, IEC60598-1, IEC60745-1, and IEC60990. General parameters:PLC remote controlSignal input: StartScreen16*2 blue LCD displayCommunication interfaceRS232(optional)CalibrationSoftwareWorking environment0-40℃,

EN 60745 Two Stations Circular Saw Switch And Lower Guard Endurance Test Equipment Product Information: This test device for circular saw switch and lower guard conforms to EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301, IEC60745-2-5:2003 Annex BB.20.102, EN 60745-2-5:2010 clause 17.101 and clause 19.102.3. It is used to test the circular saw switch performance and circular saw lower guard’s durability and recovery time.

IEC60335-2-6 Clause 11.101 Surface Temperature Probe (With Thermometer) Product Overview: The surface temperature probe conforms to the standard requirements of IEC60335-2-6:2018 Clause 11.101figure 104, EN 60335-2-9/A12 Clause 11.3 Figure Z101, IEC 60335-2-11 Clause 11.3figure 101, and etc. It is mainly used to measure the temperature rise on the front surface of the easily accessible parts of electrical appliances such as drum-type dryer, upright electric cooker, cooking

Equipment overview The Refrigerator Door Opening And Closing Test Equipment is designed and manufactured according to EN 16825:2016 standard and customer customized requirements, it is used for the durability test of the vertical door of the vertical refrigerator, and also used for the door opening and closing actions in conjunction with the energy consumption test. It is a dedicated fully automated test equipment,

Product information: ■ Automated test function, multiple test functions can be freely combined (the instrument uses four-terminal method to output test current, which is stable and reliable, and is widely used in grounding reliability testing of mechanical and electrical product production lines; suitable for safety regulations in research and development laboratories and quality inspection rooms ) Test; In

Standards & Clauses: This ceramic material fushine spirit pressure test machine meets the requirements of IEC 60335-1 clause 22.32. It is use to determine if ceramic material is tightly sintered. This test machine includes the test container, pressure boosting device and explosion-proof chamber with observation window, the whole operation is easy and safe. Technical Parameters: Test container Volume

IEC 60335-2-23 Wire Frame and 200mm Wooden Sphere for Helmet-type Hairdryer Normal Operation Testing Product overview: This wire frame and wooden sphere device meets the requirements of IEC60335 -2- 23 clause 3.1.9, figure 101. A dull black-painted wooden sphere with the diameter of 200mm, and a wire frame consisting of 32 equally spaced wires φ1.5mm±0.5mm. Technical Characteristics: Applied Standards & Clauses IEC60335 -2- 23 clause 3.1.9, figure 101 Wire Fram Diameter Ф200

5 in 1 Desktop Electrical Safety Compliance Tester Standards & Clauses: IEC60884-1:2013 “Plugs and socket-outlets for household and similar purposes- Part1: General requirements” IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1: General requirements” IEC60950-1:2013 “Information technology equipment-Safety-Part1: General requirements” IEC60065:2014 “Audio, video and similar electronic apparatus-Safety requirements” Samples and Restrictions: Household

Standards & Clauses: IEC60068-2-75:2014 “Environment testing for electric and electronic products Part2: Test methods -Test Eh: Hammer tests IDT” IEC60598-1:2017 “Luminaries-Part1: General requirements and tests” IEC62262:2002 “Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) ” Samples and Restrictions:

IEC 60335-2-9 Electrical Appliance Testing Equipment Toasters Endurance Test Standards & Clauses: IEC60335-2-9: 2016 “Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances“ clause 19.101 Samples and Restrictions: Toasters. Application: It is used to test toasters’ breaking capacity and endurance that toasters are operated at rated power input and under normal operation.. Test

Standards & Clauses: IEC60335-2-9:2016 “Household and similar electrical appliances-Safety-Part2-9:Particular requirements for grills, toasters and similar portable cooking appliances” clause 3.1.9.108 and figure 103 and figure 104. IEC60335-2-6:2018 “Household and similar electrical appliances-Safety-Part2-6:Particular requirements for stationary cooking ranges, hobs, ovens and similar

Product information: Standard applied: IEC 60335-2-6 clause 25.14 temperature sensing probes IEC 60335-2-23 clause 23.3 flexing test for conductors that are flexed when stored and clause 11.101 swivel connection sliding contacts temperature rise test IEC 60335-2-25 clause 25.14 probe flexing Test sample: Small household appliances (such as coffee pot, electric iron, toaster, luminaires and etc.), and skin or

Product information: ■ Meet the electrical safety general test requirements of IEC60335.1, UL60335.1, GB4706.1, etc. ■Built-in common human body simulation impedances, different simulation impedance standard cards can be selected according to different standards, default come with network as per IEC 60335-1, other networks are optional. ■ Upper limit preset, automatic reminder of alarm message, intelligent

Product information: It is used for the bending strength test of the handle of the cookware. The fastening connecting part of the handle bears a force of 100N, and there should be no failure in the joints such as riveting and welding. Applied standard: The design of the handle bending strength test apparatus of cookware complies with BS EN 12983-1:2020 clause 7.5 and Appendix D. Technical Parameters: 1. D-section

IEC 60335-2-2 Vacuum Cleaner Current-Carrying Hoses Torsion Resistance Test Equipment Product Overview: This current-carrying hoses torsion resistance test equipment meets the standard of IEC60335-2-2, clause 21.104. Suitable for verifying the vacuum cleaners or water-suction cleaning appliances's current-carrying hoses shall be resistant to torsion. Test Procesures (Extracted from IEC 60335-2-2 clause 21.103): One end of the hose is held in a horizontal position with the

IEC 60335-2-9 Figure 102 Stainless Steel 4.5 kg Load for Testing Rotating Spits Product overview: The testing rotating spits load complies with IEC 60335-2-9 clause 3.1.9.102 Figure102, IEC60335-2-6 clause 3.1.9.104 Figure 103, the equivalent mass is about 4. 5kg. It is made of stainless steel. Size: Ф100+20 mm * 85+10 mm. Technical Characteristics: Applied Standards & Clauses IEC 60335-2-9 clause 3.1.9.102 Figure102 IEC60335-2-6 clause 3.1.9.104 Figure 103 Load Diameter Ф100

Electrical Safety Comprehensive AC Hipot Test Equipment , Hipot Insulation Tester Standards & Clauses: IEC60884-1:2013 “Plugs and socket-outlets for household and similar purposes- Part1: General requirements” IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1: General requirements” IEC60950-1:2013 “Information technology equipment-Safety-Part1: General requirements” IEC60065:2014 “Audio, video and similar electronic apparatus-Safety requirements”

IEC 60335 Comprehensive Hydraulic Pressure Test System Product information: This hydraulic pressure test system can match many standard testing requirements, such as: IEC 60335-2-5 cl.22.101 1.2 MPa or higher IEC 60335-2-7 cl.22.101 2.0 MPa or higher IEC 60335-2-21/35 22.47 twice the rated pressure (1.4MPa common from 0.6MPa inlet pressure, 2MPa for open water heater), 22.103 0.1MPa from rated of PRV IEC 60335-2-24 cl.22.7, etc. Technical parameters Pressure range 0.5-32Mpa