HDPE Pipe Fittings

Description HDPE socket tee is a kind of mechanical part. It is a utility model patent product with high quality, low price and many advantages.Inside there are locking hoops, stepped ring seals and other components. Scientific design, strong fastness and good sealing.Easy to connect, easy to disassemble, flexible, easy to recycle, beautiful and practical. In addition to connecting PE pipes, it can also be used for the connection of U-PVC, steel pipes, etc., which is widely

Description HDPE 45 °electrofusion elbow is made of imported PE100 or PE80 as raw material.The specification, size and performance of elbow shall meet the requirements of GB / t13663-2000 and GB / t13663.2-2005. The hygienic performance complies with the GB / t17219 standard and the relevant regulations of the Ministry of health of the people's Republic of China on safety evaluation.HDPE electrofusion elbow has the advantages of good flexibility, strong corrosion resistance,

Description HDPE45°elbow material is non-toxic and belongs to green building materials. The polyethylene material rated by ISO standard is grade 0 (the lowest level) non mildew material.Compared with other commonly used plastic materials, polyethylene has much higher resistance to mildew, no bacteria, no secondary pollution. It is corrosion-resistant and does not scale in long-term use. According to GB / t17219-1998 safety assessment regulations, the water quality of pipe

Description Specifications and models of HDPE injection socket 45 ° elbow are: L75 × 75, L90 × 90, L110 × 110, L125 × 125, etc.In addition, there are l140 × 140, L160 × 160, L200 × 200, l225 × 225, L250 × 250, l280 × 280, l315 and other larger models.Injection socket 45 ° elbow is light in weight, good in flexibility and simple in construction. The weight of the elbow is 1 / 20 of the galvanized steel pipe, easy to handle, and the bending radius is 6D.Good durability, non

Description HDPE 90°electrofusion elbow adopts the wiring of resistance wire with national patent technology in the inner diameter of pipe fitting port.The resistance wire inside the elbow heats the HDPE material of pipes and pipe fittings and effectively welds them.Because of the price, the amount of hot-melt elbow is more than that of electric one. 4However, the electrofusion elbow plays an irreplaceable role in the embedded pipeline, engineering and maintenance.Especially

Description HDPE is a kind of thermoplastic resin material with high crystallinity and non polarity.The appearance of HDPE is milky white and translucent to a certain extent.PE elbow has excellent resistance to most of the chemicals used in life and industry. HDPE butt fusion elbow has good wear resistance, electrical insulation, toughness and cold resistance. Specification Standard: GB / ANSI /JIS / DIN Temperature:-60℃-60℃ Connection: Female,Welding Characteristic Good

Description High density polyethylene, referred to as HDPE, white powder or granular products.HDPE material can be used to make pipes, pipe fittings and other products, belonging to polyethylene plastic pipe products.PE elbows are fittings that change the direction of the pipe run. According to the angle, there are 45 ° and 90 ° in common use. In addition, other abnormal angle elbows such as 60 ° are also included according to the needs of the project.PE elbow material is

Description HDPE socket saddle type pipe fitting is one of PE pipe fittings, and its connection principle and process are basically the same as PE socket pipe fittings.For different PE saddle type pipe fittings, the following methods shall be used for fastening: If the PE socket saddle type pipe fittings have semi-circular groove shaped lower fastener, the section with reinforcement edge shall be fastened with wooden or rubber hammer.Slide it along the pipe from one end of

Description Preparation before welding: the same as ordinary welding.Mark out the welding area on the pipe.Clean the welding surface, scrape the welding surface within the scribed area about 0.2mm to remove the oxide layer, and the scraped area shall be larger than the oxide layer. For the installation of pipe fittings, the method provided by the manufacturer shall be used to ensure that there is no gap between the welding surface of PE electric melting saddle pipe fittings

Description Reducer, also known as reducer, is a kind of chemical pipe fitting, which is mainly used for the connection of two different pipe diameters.At present, there are two main types of reducer popular in the market: concentric reducer and eccentric reducer. The roundness of reducer shall not be greater than 1% of the outer diameter of corresponding end, and the allowable deviation shall be ± 3mm.The material standard of reducer is SY / t5037, GB / t9711 and GB / t8163

Description The pipe cap, also known as the head, is a pipe fitting welded on the pipe end or installed on the external thread of the pipe end to cap the pipe. Used to close off lines.HDPE is a kind of thermoplastic resin material with high crystallinity and non polarity. The appearance of HDPE is milky white and translucent to a certain extent.HDPE cap has excellent resistance to most of the chemicals used in life and industry. Specification Drift diameter:DN15-DN1200

Description HDPE socket joint is a kind of hydraulic component, which is a part of the hydraulic system. It connects the pipeline to the hydraulic components and can be connected or disconnected with the fluid path.Pass through is the connection tool between pipes and the connection point between parts and pipes. It plays an indispensable role in pipe fittings and is one of the two main components of hydraulic pipes.HDPE socket joint is used for direct connection of equipment

Description The cross pipe is a pipe connector, also called a cross pipe fitting, which is used at the branch pipe of the main pipe.The cross pipe can be divided into equal diameter and reducing diameter. The nozzle ends of the equal diameter cross pipe are the same size.The size of the main pipe of the reducing cross is the same, while the size of the branch pipe is smaller than that of the main pipe. HDPE is a kind of thermoplastic resin with high crystallinity and non

Description The cross pipe is a pipe connector, also called a cross pipe fitting, which is used at the branch pipe of the main pipe.The cross pipe can be divided into equal diameter and reducing diameter. The nozzle ends of the equal diameter cross pipe are the same size.The size of the main pipe of the reducing cross is the same, while the size of the branch pipe is smaller than that of the main pipe. HDPE is a kind of thermoplastic resin with high crystallinity and non

Description HDPE is an inert material. Except for a few strong oxidants, it can resist the corrosion of various chemical media, without electrochemical corrosion and without anti-corrosion coating.Compared with rubber sealing joint or mechanical joint, there is no risk of leakage due to joint distortion. HDPE reducing tee is a kind of pipe fitting with high toughness. Its elongation at break is more than 350%.It has very strong adaptability to uneven settlement of pipe

Description HDPE is an inert material. Except for a few strong oxidants, it can resist the corrosion of various chemical media, without electrochemical corrosion and without anti-corrosion coating.Compared with rubber sealing joint or mechanical joint, there is no risk of leakage due to joint distortion. HDPE reducing tee is a kind of pipe fitting with high toughness. Its elongation at break is more than 350%. It has very strong adaptability to uneven settlement of pipe

Description HDPE hot-melt butt reducing tee and pipeline connection, dn63-110 socket type and butt type can be used.Hot melt butt joint shall be used for above dn110. The hot-melt connection method is a good method, which has the advantages of low cost, good quality of pipeline interface and no pipe fittings. The main steps of HDPE hot-melt butt reducing tee connection are as follows:According to the HDPE reducing tee and pipe to be welded, select the appropriate clamp, clamp

Description HDPE hot-melt butt reducing tee and pipeline connection, dn63-110 socket type and butt type can be used.Hot melt butt joint shall be used for above dn110. The hot-melt connection method is a good method, which has the advantages of low cost, good quality of pipeline interface and no pipe fittings. The main steps of HDPE hot-melt butt reducing tee connection are as follows:According to the HDPE reducing tee and pipe to be welded, select the appropriate clamp, clamp

Description HDPE hot-melt socket reducing tee pipe fittings are produced with imported PE100 or PE80 as raw materials.The specification, size and performance of tee shall meet the requirements of GB / T 13663.2-2005. The hygienic performance of tee joint conforms to GB / t17219 standard and relevant regulations of the Ministry of health on hygienic safety evaluation.HDPE environmental protection and health reducing tee is characterized by good flexibility, strong corrosion

Description HDPE hot-melt socket reducing tee pipe fittings are produced with imported PE100 or PE80 as raw materials.The specification, size and performance of tee shall meet the requirements of GB / T 13663.2-2005.The hygienic performance of tee joint conforms to GB / t17219 standard and relevant regulations of the Ministry of health on hygienic safety evaluation. HDPE environmental protection and health reducing tee is characterized by good flexibility, strong corrosion