Carbon Steel Pipe Fittings

ASTM A234wpb 1-60inch sch40 Butt-welding Carbon steel cross Description Carbon steel cross is a pipe connector. It is also called four-way pipe fitting or four-way joint, which is used at the branch pipe of the main pipeline. The four-way can be divided into equal diameter and reducing diameter, and the nozzle ends of the equal diameter four-way are of the same size; The main pipe connecting pipe size of reducing cross is the same, while the connecting pipe size of branch

ASME B16.9 A234 SCH 40 STD 90 Degree 1.5D Carbon steel elbow Description Carbon steel elbow is a pipe fitting connecting two pipes with different pipe diameters for steering. The production process is to cut a standard elbow blank into a V-shaped elbow, and then apply pressure. With the power of conventional or special stamping equipment, the elbow blank is directly subjected to deformation force and deformed in the die, so as to obtain an elbow with certain shape, size and

Carbon Steel A234 WPB 1-1/2' SCH80 Carbon steel elbow Description Carbon steel elbow is mainly used for the connection of pipe bends, which can connect two pipes with the same diameter. According to different connection methods, it can be divided into socket, screw thread, welding and other methods. The production process of elbow is complex, so we should master certain skills. Specification Thickness:Sch10-Sch160 XXS Elbow:30° 45° 60° 90° 180°,etc Material:A234 WPB | A420

ASME B16.9 SCH40 DN50 ASTM A234 WPB Carbon steel teeDescriptionCarbon steel tee is a kind of pipe fittings. There are generally two categories. One is equal diameter tee, with the same diameter at both ends, and the branch pipe with different diameter from the other two is called reducing tee, and the other is reducing tee.The representation of carbon steel tee is as follows: for example, "T3" tee means equal diameter tee with an outer diameter of 3 inches, "T4" × four × 3.5

High quality 3/4" ANSI B16.9 A234 WPB Carbon steel tee Description Carbon steel tee is generally used for regulating valve device, pipeline drainage, etc. Concentric tube is conducive to fluid flow, and changing the diameter has less interference on the fluid flow pattern. The carbon steel tee adopts concentric pipes with different diameters for gas and vertical flow liquid pipes. Since one side of pipes with different diameters is flat, which is conducive to discharging or

ASTM A234 WPB/WPC, ANSI B 16.9 Butt-welding Carbon steel cross Description Carbon steel cross generally contains a small amount of silicon, manganese, sulfur and phosphorus in addition to carbon. According to the purpose, carbon steel can be divided into carbon structural steel, carbon tool steel and free cutting structural steel. According to the carbon content, carbon steel can be divided into low carbon steel (WC ≤ 0.25%), medium carbon steel (WC 0.25% - 0.6%) and high

Carbon Steel Pipe Fittings ASTM A234 carbon steel tee Description of ASTM A234 carbon steel tee Carbon steel tee is a kind of pipe fittings. The carbon steel tee has three openings, one inlet and two outlets; Or two imports and one export. As a kind of chemical pipe fittings, carbon steel tee is mainly used to change the flow direction at the confluence of three identical or different pipelines. Technical data sheet of ASTM A234 carbon steel tee Carbon Steel Pipe Fittings

ANSI B16.9 Carbon Steel Fittings Carbon steel butt welded tee Description of Carbon steel butt welded tee Carbon steel butt welded tee is a kind of pipe connector, which is used in the connection of main pipe and branch pipe, and is widely used in the pipeline system conveying liquid gas. Because of its unique performance advantages, it accounts for an increasing proportion in the application market. At present, with the continuous improvement of production technology and

Carbon Steel Pipe Fittings Concentric reducer Description Concentric reducers are used to connect pipes of different sizes. When the projections of the two ends of the reducer are concentric circles, it is called a 90 degree elbow, while the projection of the eccentric reducer is that the small circle is inscribed on the outer circle. The control caliber includes DIN standard (DN 10-dn 150), 3A / IDF standard (1 / 2 "- 6"), ISO standard (Ф 12.7 - Ф 152.4); international

Description Tee is a pipe fitting and pipe connector, which is mainly used at the branch pipe of the main pipe. Tee is a kind of chemical pipe fitting with three openings, i.e. one inlet and two outlets, or two inlets and one outlet. The three-way pipe has T-shaped and Y-shaped, equal diameter pipe orifice and reducer pipe orifice, which are used for the confluence of three identical or different pipes. Tee can be divided into metal material and non-metal material according

Description The Olet is mainly used for the reinforcement type pipe fittings of branch connection.The body is made of high-quality forgings with the same material as the pipe, including carbon steel, alloy steel, stainless steel, etc. The Olet and the main pipe are welded. There are three types of connection with the Olet or other pipes, instruments and valves: butt welding, socket welding and threaded connection. The pipe on which the branch is connected is called the main

ASTM A234 WPB Carbon steel pipe fittings Carbon steel reducerDescription of Carbon steel reducerCarbon steel reducer is one of the chemical pipe fittings, which is used to connect two different pipe diameters. It is also divided into concentric and eccentric. The roundness of the reducer shall not be greater than 1% of the outer diameter of the corresponding end, and the allowable deviation is ± 3mm. The reducer shall be made of SY / t5037, GB / t9711, GB / t8163, ASTM A106 /

Description of CS elbow CS elbow is the connector of two large diameter pipes. Usually, two elbows are used to connect the two ends of the pipe, plus a number of fastening bolts. CS elbow has good plasticity and low strength. After adding proper amount of carbon, the carbon will harden and the plasticity will decrease. The rigidity of carbon steel elbow is poor, which is suitable for the situation with pressure ≤ 4MPa.

3/4" Carbon Steel Pipe Fittings ANSI B16.9 A234 Carbon tee Description of ANSI B16.9 A234 Carbon tee Carbon tee is a polygonal ring shell or a polygonal fan-shaped shell with closed ends, which is welded at first. After being filled with pressure medium, internal pressure is applied. Under the action of internal pressure, the cross section gradually turns from polygon to circle, and finally becomes a circular ring shell. Carbon tee has good frost resistance and heat

ASME B16.9 Carbon Steel Pipe Fittings SCH40 Carbon reducing tee Description of SCH40 Carbon reducing tee SCH40 Carbon reducing tee is a widely used pipe, which is mostly used to transport liquid or other pipelines, such as oil, gas, natural gas and so on. Some processing areas will also use SCH40 Carbon reducing tee, such as bicycle frame, automobile transmission shaft and so on. Technical data sheet of SCH40 Carbon reducing tee ASME B16.9 Carbon Steel Pipe Fittings SCH40

Description Carbon steel reducer is one of the chemical pipe fittings, which is used to connect two different pipe diameters. It is divided into concentric reducer and eccentric reducer. The roundness of reducer shall not be greater than 1% of the outer diameter of corresponding end, and the allowable deviation shall be ± 3mm. Carbon steel reducer is a kind of pipe fitting used in pipe reducing position. The commonly used forming processes are necking pressing, expanding

Description Carbon steel reducer is one of chemical pipe fittings, which is used for the connection between two different pipe diameters. According to the shape, it can be divided into concentric and eccentric. Carbon steel reducer adopts push, press, forging, casting and other processes, and polishing equipment is used for internal and external treatment, which meets the surface precision requirements, and is suitable for dairy, food, beer, beverage, pharmaceutical,

Description Due to the large size of carbon steel flange, the integral processing of carbon steel flange is impossible only due to transportation reasons, so it must be segmented. Generally, the carbon steel flange is always divided into several arc segments for processing. Production and executive standards of carbon steel flange: national standard, American Standard, Japanese standard, German standard, Italian standard, Ministry of chemical industry standard, mechanical

Description The piston can be divided into three parts: piston crown, piston head and piston skirt. The main function of the piston is to bear the combustion pressure in the cylinder and transmit this force to the crankshaft through the piston pin and connecting rod. The piston, cylinder head and cylinder wall form a combustion chamber. The piston top is a part of combustion chamber, so it is often made into different shapes. The piston top of gasoline engine mostly adopts

Description The piston can be divided into three parts: piston crown, piston head and piston skirt. The main function of the piston is to bear the combustion pressure in the cylinder and transmit this force to the crankshaft through the piston pin and connecting rod. The piston, cylinder head and cylinder wall form a combustion chamber. The piston top is a part of combustion chamber, so it is often made into different shapes. The piston top of gasoline engine mostly adopts