Stainless Steel Pipe Fittings

Description Tee also known as tee pipe fittings, tee joints, etc. Mainly used to change the direction of the fluid, used in the main pipe to branch. It can be classified by pipe diameter. Generally, it is made of carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon, PVC and other materials.Tee can be divided into equal diameter tee and reducing tee according to pipe diameter. The nozzle end of equal tee is the same size; the main

Description Tee also known as pipe tee or tee pipe fittings, tee joints, etc. Mainly used to change the direction of the fluid, used in the main pipe to branch. It can be classified by pipe diameter. Generally, it is made of carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon, PVC and other materials. Tee is a kind of chemical pipe fitting with three orifices, i.e. one inlet and two outlets, or two inlets and one outlet, with T

ASME B16.9 2 inch ss 304 ss316 45 90 degree Stainless steel elbow Description Stainless steel elbow is a special raw material, which does not need to add pipe blank raw materials, so it is easy to control during processing. Stainless steel elbow can save the cost of pipe making equipment and mold, and elbow with arbitrary large diameter and relatively thin wall thickness can be obtained. Stainless steel elbow is made of flat plate or developable curved surface, so it has the

Stainless steel pipe elbow fittings Stainless steel elbow Description of Stainless steel elbow Stainless steel elbow is able to resist weak corrosive media (such as air, steam and water) and chemical corrosive media (such as acid, alkali and salt). In practical use, steel resistant to weak corrosive medium is usually called stainless steel stamping elbow, and steel resistant to chemical medium is called acid resistant steel. Because of the different chemical composition, the

Stainless Steel Pipe Fittings 304 stainless steel elbow Description 304 stainless steel elbow in the pipeline installation is a necessary product, is to solve the overall needs of pipeline installation. However, in the past, many elbow fittings used in engineering construction were made of plastic materials, but now many of them use 304 stainless steel elbow, or 316L stainless steel elbow has been selected for pipe installation in some strict and high-grade areas. Technical

Stainless steel pipe flange fittings Stainless steel flange Description Stainless steel flange connection can be divided into five ways: flat welding, butt welding, socket welding, loose sleeve, threaded connection. Flat welding is only used to weld the outer layer, not the inner layer; it is commonly used in medium and low pressure pipelines, and the nominal pressure of the pipeline is less than 2.5MPa. There are three kinds of sealing surface of flat welding flange, which

Description Socket welding flange is a kind of bridge used to establish connection between two pipes. It can be used for dismantling piping systems, temporary or mobile installation, transition between dissimilar materials, and joining in environments that are not conducive to cementation. Flange is a relatively simple mechanical connector, especially widely used in high pressure pipeline. Very cost-effective compared with other flange, very cost-effective. Specification

Description Olet is also called Olet seat, saddle and saddle type pipe joint. It is mainly used for reinforcing pipe fittings of branch connection instead of branch connection types such as reducing tee, reinforcing plate and reinforcing pipe section.The Olet has the outstanding advantages of safety, reliability, cost reduction, simple construction, improvement of medium flow channel, series standardization, and convenient design and selection. Especially in the high pressure

Description The cross is a pipe connector, which is used at the branch pipe of the main pipe. The cross tee can be divided into equal diameter and reducing diameter, the nozzle ends of the equal diameter cross tee are the same size; the main nozzle size of the reducing cross tee is the same, and the nozzle size of the branch pipe is smaller than that of the main pipe. the manufacturing process of the cross mainly includes hydraulic bulging and hot pressing, the hydraulic

. 1, Tee is a pipe connection. Also known as pipe tee or tee pipe fittings, stainless steel equal tee joint, used in the main pipe branch pipe. 2, Tee has three orifices, i.e. one inlet and two outlets, or two inlets and one outlet, including T-shaped and Y-shaped, equal diameter orifices and reducer orifices, which are used for the convergence of three identical or different pipelines. The main

Metal t pipe fitting butt welding olet of stainelss steel pipe fittings 1, Olet is also called Olet seat, saddle and saddle type pipe joint. 2, It is mainly used for reinforcing pipe fittings of branch connection instead of branch connection types such as reducing tee, reinforcing plate and reinforcing pipe section. 3, The Olet has the outstanding advantages of safety, reliability, cost reduction, simple construction, improvement of medium flow channel, series standardization

Desceription Eccentric reducer is a kind of pipe fitting used in pipe reducing. The commonly used forming process is reducing pressing, expanding pressing or reducing plus expanding pressing. For some sizes of reducer, stamping can also be used. In addition to using stainless steel pipe as raw material to produce stainless steel eccentric reducer, stainless steel plate can also be used to produce some specifications of reducer by stamping process. The shape of the die used

Description 1.The two ends of reducer have different diameters, which are used to connect pipes or flanges with different diameters for reducing. The orifices at both ends of the concentric reducer are on the same axis. When reducing, if the position of the pipe is calculated by the axis, the position of the pipe will not change. It is generally used for reducing of gas or vertical liquid pipe.The energy-saving and emission reduction effect of the reducer is more significant.

ASME/ANSI B16.9 SS304 SS316L 150lb Stainless steel teeDescriptionStainless steel tee is a kind of stainless steel pipe fitting, which is mainly used at the connection of main pipe and branch pipe. It can be divided into equal diameter tee and reducing tee, that is, three tees with the same diameter are called equal diameter tee, and different ones are called reducing tee. Stainless steel tee has good corrosion resistance. So it is often used in petrochemical and other fields

ASME B16.9 ASTM A815 Duplex 2507 Stainless steel elbow Description Stainless steel elbow is different from the main material of carbon steel elbow. Its chemical composition will keep the elbow surface from rusting and corrosion for a long time. Stainless steel elbow does not need pipe blank as raw material, which can save the cost of pipe making equipment and mold, and can obtain elbow with arbitrary large diameter and relatively thin wall thickness. Specification Standards:

Class 150 SS304 316 ISO9001 Standard Stainless steel reducer Description Stainless steel reducer is a tool for connecting pipes of different sizes. According to the center line, stainless steel reducer can be divided into eccentric stainless steel reducer and concentric stainless steel reducer. The projection of the two ends of the stainless steel reducer is a concentric circle, which is a concentric stainless steel reducer. The reason why the eccentric stainless steel

ASME B16.9 SS304 316 321 Pipe Fittings Stainless steel reducer Description Stainless steel reducer is made of stainless steel reducer and alloy steel reducer, and the steel used for stainless steel reducer is No. 20 steel or q234, Q345 and other steel. Specification Size: 1/8" to 4" Application: Connect pipes Process Method: Forged / Casting Standard: ASTM A403 ASME / ANSI B16.5 etc Material Grade: TP304 , TP304L , TP316 , TP316L Technical data sheet ASME B16.9 SS304 316 321

SS304 4 inch schedule 40 welded Stainless steel cross Description Stainless steel cross refers to a water pipe joint made of stainless steel, which is a pipe fitting used at the branch of the pipe. Stainless steel cross can be divided into equal diameter and reducing diameter, and the nozzle ends of equal diameter cross are of the same size; The size of the main pipe of the reducing cross is the same, while the size of the branch pipe is smaller than that of the main pipe.

ASME B16.9 Stainless Steel 316 Duplex 3/4 Stainless steel cross Description Stainless steel cross is a kind of pipe fitting used at the branch of pipeline. For the manufacture of cross with seamless pipe, there are two commonly used processes: hydraulic bulging and hot pressing. The stainless steel cross adopts the process of pressing after heating, which reduces the tonnage of equipment required for material forming. The hot pressing cross has wide adaptability to materials.

ASME B16.9 1-48 Inch Fittings 304 316L Stainless steel tee Description Stainless steel tee is a kind of pipe fitting. Branch for main pipe. It is divided into equal diameter tee and reducing tee. The three ports of the equal tee have the same size. The main pipe of reducing tee is the same size, but the branch pipe is smaller than the main pipe. Specification Size Range:From ½” up to 106” Standard:ANSI, ISO, JIS, DIN, GB Thickness:SCH STD, XS, XXS, SCH 10 ~ SCH 160 Stainless