Industrial Steel Pipe Fittings

Description HDPE socket tee is a kind of mechanical part. It is a utility model patent product with high quality, low price and many advantages.Inside there are locking hoops, stepped ring seals and other components. Scientific design, strong fastness and good sealing.Easy to connect, easy to disassemble, flexible, easy to recycle, beautiful and practical.In addition to connecting PE pipes, it can also be used for the connection of U-PVC, steel pipes, etc., which is widely

Description HDPE 45 °electrofusion elbow is made of imported PE100 or PE80 as raw material.The specification, size and performance of elbow shall meet the requirements of GB / t13663-2000 and GB / t13663.2-2005.The hygienic performance complies with the GB / t17219 standard and the relevant regulations of the Ministry of health of the people's Republic of China on safety evaluation. HDPE electrofusion elbow has the advantages of good flexibility, strong corrosion resistance,

Description HDPE 45 °electrofusion elbow is made of imported PE100 or PE80 as raw material.The specification, size and performance of elbow shall meet the requirements of GB / t13663-2000 and GB / t13663.2-2005.The hygienic performance complies with the GB / t17219 standard and the relevant regulations of the Ministry of health of the people's Republic of China on safety evaluation. HDPE electrofusion elbow has the advantages of good flexibility, strong corrosion resistance,

Description HDPE45°elbow material is non-toxic and belongs to green building materials. The polyethylene material rated by ISO standard is grade 0 (the lowest level) non mildew material.Compared with other commonly used plastic materials, polyethylene has much higher resistance to mildew, no bacteria, no secondary pollution. It is corrosion-resistant and does not scale in long-term use. According to GB / t17219-1998 safety assessment regulations, the water quality of pipe

Description Specifications and models of HDPE injection socket 45 ° elbow are: L75 × 75, L90 × 90, L110 × 110, L125 × 125, etc.In addition, there are l140 × 140, L160 × 160, L200 × 200, l225 × 225, L250 × 250, l280 × 280, l315 and other larger models.Injection socket 45 ° elbow is light in weight, good in flexibility and simple in construction. The weight of the elbow is 1 / 20 of the galvanized steel pipe, easy to handle, and the bending radius is 6D.Good durability, non

Description HDPE 90°electrofusion elbow adopts the wiring of resistance wire with national patent technology in the inner diameter of pipe fitting port.The resistance wire inside the elbow heats the HDPE material of pipes and pipe fittings and effectively welds them.Because of the price, the amount of hot-melt elbow is more than that of electric one. However, the electrofusion elbow plays an irreplaceable role in the embedded pipeline, engineering and maintenance.Especially

Description HDPE is a kind of thermoplastic resin material with high crystallinity and non polarity. The appearance of HDPE is milky white and translucent to a certain extent. PE elbow has excellent resistance to most of the chemicals used in life and industry. HDPE butt fusion elbow has good wear resistance, electrical insulation, toughness and cold resistance. Specification Standard: GB / ANSI /JIS / DIN Temperature:-60℃~60℃ Advantage: Corrosion resistance,high toughness

Description High density polyethylene, referred to as HDPE, white powder or granular products.HDPE material can be used to make pipes, pipe fittings and other products, belonging to polyethylene plastic pipe products.PE elbows are fittings that change the direction of the pipe run. According to the angle, there are 45 ° and 90 ° in common use. In addition, other abnormal angle elbows such as 60 ° are also included according to the needs of the project.PE elbow material is

Description Tee also known as pipe tee or tee pipe fittings, tee joints, etc. Mainly used to change the direction of the fluid, used in the main pipe to branch. It can be classified by pipe diameter. Generally, it is made of carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon, PVC and other materials. Tee is a kind of chemical pipe fitting with three orifices, i.e. one inlet and two outlets, or two inlets and one outlet, with T

Description It is applicable to the connection of all specification pipes of the same material and SDR system.It is applicable to the connection of pipes with different grades of the same grade of materials.Reliable connection performance, high interface strength, good air tightness and stable fusion performance. It can effectively resist oxidation and corrosion, and ensure the stability of welding performance.It is not easy to be affected by environmental temperature change

Description Reducer, also known as reducer, is one of the chemical pipe fittings, which is used for the connection of two different pipe diameters.According to different types, it can be divided into concentric reducer and eccentric reducer.When the flow rate of the fluid in the pipeline changes, such as increasing or decreasing, and the flow rate requirement changes little, reducer shall be used. At the inlet of the pump, in order to prevent cavitation, a reducer is needed

Description HDPE socket joint is a kind of hydraulic component, which is a part of the hydraulic system. It connects the pipeline to the hydraulic components and can be connected or disconnected with the fluid path.Pass through is the connection tool between pipes and the connection point between parts and pipes. It plays an indispensable role in pipe fittings and is one of the two main components of hydraulic pipes.HDPE socket joint is used for direct connection of equipment

Description HDPE is an inert material. Except for a few strong oxidants, it can resist the corrosion of various chemical media, without electrochemical corrosion and without anti-corrosion coating.Compared with rubber sealing joint or mechanical joint, there is no risk of leakage due to joint distortion. HDPE reducing tee is a kind of pipe fitting with high toughness. Its elongation at break is more than 350%.It has very strong adaptability to uneven settlement of pipe

Description HDPE electric melting tee is a kind of tee pipe which can be melted to connect through the temperature generated by current Capacitance is the main parameter of the three-way. In some low-voltage circuits, the voltage requirement is not high, just mark the capacitance.The tee of HDPE pipeline system is mainly divided into hot melt tee and electric melt tee. Because of the price, the amount of hot melt tee is more than that of electric melt tee.But the electric

Description Connector is a kind of hydraulic term, which is a part of connecting pipeline or installing pipeline on hydraulic components in hydraulic system. It is a general term of connector that can be assembled and disassembled in the fluid path.It mainly includes: welding type, ferrule type, buckle type and flared type. Supporting accessories include: nut, ferrule, flared core, flared sleeve, flared nut. Threaded joint refers to the pipe connection with thread, which is

Description An elbow is a fitting that changes the direction of a run. According to the angle, there are three kinds of most commonly used: 45 ° and 90 ° 180 °. In addition, according to the needs of the project, there are other abnormal angle elbows such as 60 °. Elbow materials include cast iron, stainless steel, alloy steel, malleable cast iron, carbon steel, non-ferrous metals and plastics, etc. The methods of connection with pipes include direct welding, flange

Description Coupling is a kind of fitting commonly used in industrial pipeline connection, also called direct head. Coupling is a short pipe used to connect two pipes. Because of its convenient use, it is widely used in civil construction, industry, agriculture and other fields.According to its manufacturing process, the Coupling can be divided into forging and casting. Casting refers to melting the ingot and pouring it into a fixed Coupling model, then cooling it.The bell

Description The stainless steel butt welding elbow is mainly used as a connecting pipe fitting in the pipeline installation, which is used for the connection at the pipe corner. Connect two pipes with the same or different nominal diameter to make the pipe turn. The main difference between stainless steel elbow and carbon steel elbow is the material difference. The common steel types are: 304, 304L, 316, 316L, etc. The chemical composition of the elbow will keep the surface

Description Stub ends is a kind of steel butt welded pipe. It is usually a section inside the loose flange. Loose flange is commonly known as looper flange, including welding looper flange, flanging looper flange and butt welding looper flange. It is often used in the case of medium temperature and pressure are not high and medium corrosion is strong. When the medium corrosion is strong, the flange contact medium part is Stub ends, mainly using high-grade corrosion-resistant

Description Pipe cap, also known as head, plug, cover, pipe cover and bulkhead, is welded on the pipe end or installed on the external thread of the pipe end to cover the pipe fittings. It is used to close the pipeline and has the same function as the pipe plug. The form of the pipe cap is similar to that of the blind plate, except that the blind plate can be removed for sealing, while the welded pipe cap cannot be removed. The pipe cap includes convex pipe cap, cone shell,