Carbon Steel Socket Weld Fittings

Description The pipe cap is a pipe fitting used to close the pipeline. The form of blind plate is similar, but the blind plate can be removed for sealing, while the welded pipe cap can not be removed. The pipe cap includes convex pipe cap, cone shell, variable diameter section, flat cover and shrink mouth design. The diameter, size and span of pipe cap are very large, and they are widely used in our production and life. The small cap is installed on the small volume container

Description The Cross tee can be divided into equal diameter and reducing diameter. The nozzle ends of the equal diameter Cross tee are the same size. The main nozzle size of the reducing Cross tee is the same, and the nozzle size of the branch pipe is smaller than that of the main pipe. A cross is a pipe fitting used at the branch of a pipe. As for the seamless pipe used to make the cross, there are two commonly used processes: hydraulic bulging and hot pressing. The

Description Elbow is a common connection pipe in the installation of water heating. It is used for the connection at the bend of the pipe and to change the direction of the pipe. It is used to connect two pipes with the same or different nominal diameters, so that the pipes can make turns of 90 °, 45 °, 180 ° and various degrees. It is divided into right angle bend, stamping elbow, pressing elbow, mechanism elbow, welding elbow, etc. Bending radius less than or equal to 1.5

Description Coupling is a commonly used fitting in industrial pipeline connection. Usually, the plumber is also called direct head in the process of use. It is mainly used to connect a short tube of two pipes. Also called outer joint. Hose clamps are widely used in civil construction, industry, agriculture and other fields because of their convenient use. Couplings are classified according to materials: carbon steel, stainless steel, alloy steel, pvc, plastic, etc. The main

Description Tee, also known as tee joint, is mainly used to change the direction of the fluid and at the branch of the main pipeline. The nozzle end of equal tee is the same size; the main nozzle size of reducing tee is the same, and the nozzle size of branch pipe is smaller than that of main pipe. There are two ways to make tee: hydraulic bulging and hot pressing. Socket welding tee is a kind of high-pressure pipe connection fitting, which is mainly formed by forging blank

Specification In a piping system, an elbow is a fitting that changes the direction of a pipe run. According to the angle, there are three kinds of most commonly used: 45 ° and 90 ° 180 °. In addition, according to the needs of the engineering road, there are other abnormal angle elbows such as 60 °. According to the material, there are cast iron, stainless steel, alloy steel, malleable cast iron, carbon steel, non-ferrous metals and plastics. According to the production