Building Material Test Series

LOI-A Control Automatic Limited Oxygen Index AnalyzerIntroduction:The LOI-A Computer Automatic Limited Oxygen Index Analyzer is designed to test combustibility by oxygen concentration, letting user know minimum oxygen concentration as necessary for combustion.LOI-A Computer Automatic Limited Oxygen Index Analyzer working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen into the chimney, ignite the specimen, then measure the min

Building Material Plastic Limiting Oxygen Index Test Apparatus Introduction: LOI-A Limiting Oxygen Index Test Apparatus is designed to test combustibility by oxygen concentration, letting user know minimum oxygen concentration as necessary for combustion. The working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen into the chimney, ignite the specimen, then measure the min concentration of oxygen to support continuous combustion.

CCT ASTM E1354 Cone Calorimeter Introduction: The CCT ASTM E1354 Cone Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT ASTM E1354 Cone Calorimeter can be moved, it can be used for cone calorimeter test, and CCT ASTM E1354 Cone Calorimeter can also be used in the large heat release rate test system such as Single Burning Item(SBI), cable burning test system

LOI-A Computer Control Cable Material Testing Automatic LOI Tester Introduction: The LOI-A Automatic LOT Tester is designed to test combustibility by oxygen concentration, letting user know minimum oxygen concentration as necessary for combustion. The working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen into the chimney, ignite the specimen, then measure the min concentration of oxygen to support continuous combustion. Standards:

FPT Laminated Foil Fire Performance Testing BS476-6 Tester Introduction: BS 476-6 is a test method of measuring the flame propagation properties of materials, primarily for fire protection performance evaluation of the walls and ceilings, measurement results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp is 530J / S. 2 minutes and 45 seconds later, the two electric heater was adjusted to

SIT Building Material ISO11925 Ignitability Tester Introduction: SIT ISO11925 Ignitability Tester is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. SIT ISO11925 Ignitability Tester uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. SIT ISO11925 Ignitability Tester is applicable to building material categories of B, C, D, E, Bfl, Cfl, Dfl and Efl

NCF ISO1182 Non-combustibility Tester Introduction: NCF ISO1182 Non-combustibility Tester is designed and manufactured in accordance with EN ISO1182 standard , it is mainly for building products testing. NCF ISO1182 Non-combustibility Tester is mainly used in the non-combustibility test for building materials, and is suitable for classification of combustion performance of Class A fireproof materials. NCF ISO1182 Non-combustibility Tester is also comply to BS 476-4 & 11 and

LOI-A Building Material Limiting Oxygen Test ApparatusIntroduction:LOI-A Building Material Limiting Oxygen Test Apparatus is designed to test combustibility by oxygen concentration, letting user know minimum oxygen concentration as necessary for combustion.The working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen into the chimney, ignite the specimen, then measure the min concentration of oxygen to support continuous combustion.

CCT Building Material Fire Resistance Testing ISO5660 Cone Calorimeter Introduction: The CCT Fire Resistance Testing ISO5660 Cone Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT Fire Resistance Testing ISO5660 Cone Calorimeter can be moved, it can be used for cone calorimeter test, and CCT Fire Resistance Testing ISO5660 Cone Calorimeter can also be used

CCT Building Material Heat Release Rate HHR Machine Introduction: The CCT Building Material Heat Release Rate HHR Machine is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT Cone Calorimeter can be moved, it can be used for cone calorimeter test, and it can also be used in the large heat release rate test system such as Single Burning Item(SBI), cable burning test system

RFP Flooring Insulation Material Critical Radiant Flux Tester Introduction: RFP Flooring Material Critical Radiant Flux Tester is the cornerstone of the flooring materials reaction to fire tests in the Euroclass system. The test measures the spread of flame of the sample, under thermal exposure, using a radiant heat ignition source. The thermal exposure is that of a fire growing in the room of origin that through a door opening, radiates onto the floorings in an adjacent room

SIT Building Materials ISO11925-2 Ignitability Tester Introduction: SIT Building Materials ISO11925-2 Ignitability Tester is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. SIT Building Materials ISO11925-2 Ignitability Tester uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. It is applicable to building material categories of B, C, D, E, Bfl, Cfl,

LOI-A Automatic ASTM D2863 Limited Oxygen Index Tester Introduction: LOI-A Automatic ASTM D2863 Limited Oxygen Index Tester is designed to test combustibility by oxygen concentration, letting user know minimum oxygen concentration as necessary for combustion. The working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen into the chimney, ignite the specimen, then measure the min concentration of oxygen to support continuous combustion

CCT Electrical Cable ASTM E1354 Cone Calorimeter Introduction: The CCT ASTM E1354 Cone Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT Cone Calorimeter can be moved, it can be used for cone calorimeter test, and it can also be used in the large heat release rate test system such as Single Burning Item(SBI), cable burning test system, etc. Application

CCT Oxygen Cosumption Calorimeter Introduction: The CCT Oxygen Cosumption Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT Cone Calorimeter can be moved, it can be used for cone calorimeter test, and it can also be used in the large heat release rate test system such as Single Burning Item(SBI), cable burning test system, etc. Application Field: Building

` SIT ISO11925-2 Single Flame Source Tester Introduction: SIT ISO11925-2 Single Flame Source Tester is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. SIT ISO11925-2 Single Flame Source Tester uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. It is applicable to building material categories of B, C, D, E, Bfl, Cfl, Dfl and Efl testing. SIT ISO11925

NCF ISO1182 Noninflammable Material Non-combustibility Tester Introduction: NCF ISO1182 Noninflammable Material Non-combustibility Tester is designed and manufactured in accordance with EN ISO1182 standard , it is mainly for building products testing. NCF ISO1182 Noninflammable Material Non-combustibility Tester is mainly used in the non-combustibility test for building materials, and is suitable for classification of combustion performance of Class A fireproof materials. NCF

CCT ISO5660 Cone Calorimeter Introduction: The CCT Cone Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT Cone Calorimeter can be moved, it can be used for cone calorimeter test, and it can also be used in the large heat release rate test system such as Single Burning Item(SBI), cable burning test system, etc. Application Field: Building products; Railway

RFP Flooring Critical Radiant Flux Testing ASTM E648 Tester Introduction: RFP Flooring Critical Radiant Flux Testing ASTM E648 Tester is the cornerstone of the flooring materials reaction to fire tests in the Euroclass system. The test measures the spread of flame of the sample, under thermal exposure, using a radiant heat ignition source. The thermal exposure is that of a fire growing in the room of origin that through a door opening, radiates onto the floorings in an

Automatic Computer Control Oxygen Index Testing Machine Introduction: LOI-A Automatic Computer Control Oxygen Index Testing Machine is designed to test combustibility by oxygen concentration, letting user know minimum oxygen concentration as necessary for combustion. The working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen into the chimney, ignite the specimen, then measure the min concentration of oxygen to support continuous