Building Material Test Series

LOI-A Plastic Combustion Min. Oxygen Concentration Testing ASTM D2863 TesterIntroduction:LOI-A Plastic Combustion Min. Oxygen Concentration Testing ASTM D2863 Tester is designed to test combustibility by oxygen concentration, letting user know minimum oxygen concentration as necessary for combustion.The working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen into the chimney, ignite the specimen, then measure the min concentration

LOI-ATouch Screen ISO4589-2 Limiting Oxygen Index Testing Equipment The LOI-A Automatic LOT Tester is designed to test combustibility by oxygen concentration, letting user know minimum oxygen concentration as necessary for combustion. The working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen into the chimney, ignite the specimen, then measure the min concentration of oxygen to support continuous combustion. Standards: ASTM: ASTM

LOI-A Fully Automatic Plastic Limited Oxygen Index Loi Analyzer Introduction: The LOI-A Automatic LOT Tester is designed to test combustibility by oxygen concentration, letting user know minimum oxygen concentration as necessary for combustion. The working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen into the chimney, ignite the specimen, then measure the min concentration of oxygen to support continuous combustion. Standards:

RFP Thermal Radiation Testing Device for Floor Construction Products According To EN ISO 9239-1 Introduction: RFP Thermal Radiation Testing Device is the cornerstone of the flooring materials reaction to fire tests in the Euroclass system. The test measures the spread of flame of the sample, under thermal exposure, using a radiant heat ignition source. The thermal exposure is that of a fire growing in the room of origin that through a door opening, radiates onto the floorings

Exposed Attic Floor Insulation Material Critical Radiant Flux Tester Introduction: Exposed Attic Floor Insulation Material Critical Radiant Flux Tester is the cornerstone of the flooring materials reaction to fire tests in the Euroclass system. The test measures the spread of flame of the sample, under thermal exposure, using a radiant heat ignition source. The thermal exposure is that of a fire growing in the room of origin that through a door opening, radiates onto the

Hot Sale Building Material En ISO11925-2 Ignitability Tester Introduction: Hot Sale Building Material En ISO11925-2 Ignitability Tester is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. It uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. It is applicable to building material categories of B, C, D, E, Bfl, Cfl, Dfl and Efl testing. The tester also

Sit Single Flame Source Test Ignitability Apparatus En ISO 11925-2 DIN 53438 Introduction: ISO 11925-2 Standard Ignitability Apparatus is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. It uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. It is applicable to building material categories of B, C, D, E, Bfl, Cfl, Dfl and Efl testing. The tester also

NF505 Flame Test Equipment Thermal Radiation Dripping Test Apparatus Introduction: The Dripping Tester, in accordance with NF P92-505/ECE R118, is used to determine the melting behaviour of materials under a 500W radiant heat source. Working Principle: During the NF P92-505 test, a specimen is placed horizontal and exposed to an electric radiator above. A receptacle is positioned under the specimen to collect the resultant drops. Some cotton wool is put in the receptacle in

Building Material Thermal Radiant Melt Drop Tester by NF P92-505 Introduction: The Dripping Tester, in accordance with NF P92-505/ECE R118, is used to determine the melting behaviour of materials under a 500W radiant heat source. Working Principle: During the NF P92-505 test, a specimen is placed horizontal and exposed to an electric radiator above. A receptacle is positioned under the specimen to collect the resultant drops. Some cotton wool is put in the receptacle in order

NF P92-505 Fire Test Dripping Tester to Building Material Introduction: The Dripping Tester, in accordance with NF P92-505/ECE R118, is used to determine the melting behaviour of materials under a 500W radiant heat source. Working Principle: During the NF P92-505 test, a specimen is placed horizontal and exposed to an electric radiator above. A receptacle is positioned under the specimen to collect the resultant drops. Some cotton wool is put in the receptacle in order to

Ncf Non Combustible Building Material Flammability Test ISO 1182 and BS476-4 Test Machine NCF Non Combustion Test Equipment is designed and manufactured in accordance with EN ISO1182 standard , it is mainly for building products testing. NCF Non Combustion Test Equipment is mainly used in the non-combustibility test for building materials, and is suitable for classification of combustion performance of Class A fireproof materials. NCF Non Combustion Test Equipment is also

Ncf BS 8414 Building Material Smoldering Combustion Test Furnace Ncf BS 8414 Building Material Smoldering Combustion Tester is designed and manufactured in accordance with EN ISO1182 standard , it is mainly for building products testing. Ncf BS 8414 Building Material Smoldering Combustion Tester is mainly used in the non-combustibility test for building materials, and is suitable for classification of combustion performance of Class A fireproof materials. Ncf BS 8414 Building

Ncf PC Control ISO 1182 Non Combustion Test Equipment for Construction Materials NCF Non Combustion Test Equipment is designed and manufactured in accordance with EN ISO1182 standard , it is mainly for building products testing. NCF Non Combustion Test Equipment is mainly used in the non-combustibility test for building materials, and is suitable for classification of combustion performance of Class A fireproof materials. NCF Non Combustion Test Equipment is also comply to BS

SBI Building Materials Flame Retardant Properties Testing Sbi En13823 Tester Introduction: The Single Burning Item (SBI) is a method of test for determining the reaction to fire behavior of building products (excluding floorings) when exposed to the thermal attack by a single burning item (a sand-box burner supplied with propane). The specimen is mounted on a trolley that is positioned in a frame beneath an exhaust system. The reaction of the specimen to the burner is

ISO1716 Material Combustion Heat Testing Calorific Value Tester Introduction: Gross heat of combustion of materials is an important parameters to evaluate building materials heat release and fire base data; ISO1716 Material Combustion Heat Testing Calorific Value Tester is the most common device for measuring the heat of combustion or calorific value of material by putting the specimen into the oxygen cell. Our ISO1716 Material Combustion Heat Testing Calorific Value Tester

CCT ASTM D6113 Cone Calorimeter Analysis Instrument Introduction: CCT ASTM D6113 Cone Calorimeter Analysis Instrument CCT Cone Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. CCT ASTM D6113 Cone Calorimeter Analysis Instrument analysis cabinet of our CCT Cone Calorimeter can be moved, it can be used for cone calorimeter test, and it can also be used in the large heat release rate test

CCT Good Price ISO5660 Cone Calorimeter, BS 476 Cone Calorimeter for Building Material Introduction: CCT Good Price ISO5660 Cone Calorimeter CCT Cone Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. CCT Good Price ISO5660 Cone Calorimeter analysis cabinet of our CCT Cone Calorimeter can be moved, it can be used for cone calorimeter test, and it can also be used in the large heat release

CCT Fire Spread Research Hrr Machine as Per ISO5660-1 Introduction: CCT Fire Spread Research HRR Machine As Per ISO5660-1 is designed and manufactured according to international standards and mainly for building products and electric cable testing. CCT Fire Spread Research HRR Machine As Per ISO5660-1 analysis cabinet of our CCT Cone Calorimeter can be moved, it can be used for cone calorimeter test, and it can also be used in the large heat release rate test system such as

Direct Flame Impingement Building Material Flammability Tester by BS476 Part 12 Introduction: Applicable to the British building materials and high iron flame retardant test standard, conform to the standards for BS 476-7, the method of the test to determine the classification of the surface spread of flame of products. BS476-7 Direct Flame Impingement Building Material Flammability Tester is mainly used for the determination of the extension of the flame which on the exposed

Building Material Flame Surface Spread Testing BS476-7 Test Apparatus Introduction: Applicable to the British building materials and high iron flame retardant test standard, conform to the standards for BS 476-7, the method of the test to determine the classification of the surface spread of flame of products. Building Material Flame Surface Spread Testing BS476-7 Test Apparatus is mainly used for the determination of the extension of the flame which on the exposed surface of