Building Material Test Series

ISO5660, ASTM E1354 Cone Calorimeter ---- Model CCT Introduction: The CCT ASTM E1354 Cone Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT ASTM E1354 Cone Calorimeter can be moved, it can be used for cone calorimeter test, and CCT ASTM E1354 Cone Calorimeter can also be used in the large heat release rate test system such as Single Burning Item(SBI), cable

Single Burning Item -- Model: SBI Introduction: The Single Burning Item (SBI) is a method of test for determining the reaction to fire behavior of building products (excluding floorings) when exposed to the thermal attack by a single burning item (a sand-box burner supplied with propane). The specimen is mounted on a trolley that is positioned in a frame beneath an exhaust system. The reaction of the specimen to the burner is monitored instrumentally and visually. Heat and

FRP Flooring Radiant Panel Tester -- Model: FRP Introduction:The ISO 9239 Radiant Flooring Panel test is the cornerstone of the flooring materials reaction to fire tests in the Euroclass system. The test measures the spread of flame of the sample, under thermal exposure, using a radiant heat ignition source. The thermal exposure is that of a fire growing in the room of origin that through a door opening, radiates onto the floorings in an adjacent room or corridor. The

Building Material BS476-7 Flame Surface Spread Tester -- Model: BS476-7 Introduction: Applicable to the British building materials and high iron flame retardant test standard, conform to the standards for BS 476-7, the method of the test to determine the classification of the surface spread of flame of products. BS 476-7 is mainly used for the determination of the extension of the flame which on the exposed surface of the wall and ceiling. The test method is through the

Building Material BS476-6 Fire Propagation Tester -- Model: BS476-6 Introduction: BS 476-6 is a test method of measuring the flame propagation properties of materials, primarily for fire protection performance evaluation of the walls and ceilings, measurement results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp is 530J / S. 2 minutes and 45 seconds later, the two electric heater was

Paramagnetic Method Limited Oxygen Index Tester -- Model COI Introduction: COI Oxygen Index tester measures minimum oxygen concentration as necessary when specimen combustion. Oxygen sensor of this equipment is Paramagnetic Type, which is precise, long lifetime, reliable and has less error rate. COI Oxygen Index tester meets the contents of standards like ASTM, ISO 4589-2, NES and so on. Standards: ASTM: ASTM D2863 ISO: ISO 4589-2 NES: NES 714 Application Field: Building

ISO11925 Flammability Tester -- Model SIT Introduction: SIT Small Flame Ignition Tester is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. It uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. It is applicable to building material categories of B, C, D, E, Bfl, Cfl, Dfl and Efl testing. The tester also meets DIN 4102-Part 1-Class B2 test requirement

NCF Non-Combustibility Tester ---- Model NCF Introduction: NCF Non-combustibility Tester is designed and manufactured in accordance with EN ISO1182 standard , it is mainly for building products testing. It is mainly used in the non-combustibility test for building materials, and is suitable for classification of combustion performance of Class A fireproof materials. NCF Non-combustibility Tester is also comply to BS 476-4 & 11 and IMO FTP Part 1 standards. So it can also test

ISO5660 Cone Calorimeter ---- Model CCT Introduction: The CCT Cone Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT Cone Calorimeter can be moved, it can be used for cone calorimeter test, and it can also be used in the large heat release rate test system such as Single Burning Item(SBI), cable burning test system, etc. Features: Integrated body and 19”

XP-2 Building Material Smoke Density Chamber ---- Model XP-2 Introduction: XP-2 Smoke Density Chamber is designed and manufactured in accordance with ASTM D2843 standard , it is mainly for building products testing. By detecting the loss of light transmission in test chamber, it can measure smoke density of burning and decomposition of building material during test. Features: The test chamber is Teflon coating, to resist the corrosion of smoke released during burning. Light