Building Materials Testing Equipment

Introduction: Heat release quantity is the core parameters to evaluate the fire behavior of materials and products.Our Cone Calorimeter can meet all existing standards (including ISO 5660, ASTM E 1354, ASTM E 1474, ASTM E 1740, ASTM F 1550, ASTM D 6113,NFPA 264,CAN ULC 135 and BS 476 Part 15).This cone calorimeter includes these systems such as heat release, mass loss, smoke generation, etc,and allow users to buy the parts they need one by one and add into the same chamber

Introduction: The CCT Building Material Heat Release Rate HHR Test Machine is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT Cone Calorimeter can be moved, it can be used for cone calorimeter test, and it can also be used in the large heat release rate test system such as Single Burning Item(SBI), cable burning test system, etc. Application Field: Building products;

Introduction: XP-2 Exit Sign Smoke Tester is designed and manufactured in accordance with ASTM D2843 standard , it is mainly for building products testing. By detecting the loss of light transmission in test chamber, it can measure smoke density of burning and decomposition of building material during test. Features: The test chamber is Teflon coating, to resist the corrosion of smoke released during burning. Light source is incandescent lamp, the photoelectric sensor is

IS 11239.12 Horizontal Burning Characteristics Tester Introduction The foam horizontal burning characteristics tester is designed according to the national standard GB/T 8332-2008: the horizontal combustion method is used to determine the combustion performance of foam. It is suitable for measuring the horizontal combustion performance of small samples of foamed plastics with a density of less than 250kg/m³ under a small flame. The Horizontal Burning Characteristics Tester is

ASTM E162 Radiant Panel Flame Spread Tester Introduction ASTM E162 is one most widely used test standard to evaluate the propagation properties of material in USA. The heat resource use gas radiant panel heating and a gas burner ignited. This method is widely used in flame propagation properties of the test material for rail train material to evaluate flame retardant based on the standard NFPA 130, like evaluation train interior panels, ceilings, sound insulation, windows,

Introduction NF P 92-504 for the determination of horizontal flame spread rate of materials. This method also applies in other rapidly melting and testing without burning, or not achieve M1 ~ M3 material. This speed of spread of flame test is intended to test a sample of a material under certain conditions to a heat source consisting of a gas igniter, and may trigger: sample fire and flame persistence test and flame spread and spread. The speed test is in accordance with the

Product Introduction The thermal radiation melt drop tester is developed according to the French building materials and railway vehicle flame retardant test standard NF P92-505, and it meets the requirements of the European Union 95/28/EC automotive interior materials fire test standard; the principle of the test is that: the sample is placed horizontally on the sample rack, the vertical distance of 30mm at its office, horizontal level of a power of 500W electric radiators,

Product introduction The thermal radiation flame propagation test equipment is developed according to the French building materials and railway vehicle flame retardant test standard NF P92-501. The principle of the test is to perform 30KW/m2 heat radiation on the sample, which may cause the sample to evaporate and flammability. The gas, and the combustion of the volatile gas, while observing the spread state of the flame, collects relevant data for evaluating the flame

Product Introduction Smoldering characteristic test furnace is mainly used in the fire performance test method of external thermal insulation system of building exterior wall. It is suitable for testing the smoldering characteristic test of thermal insulation material in building external thermal insulation system. The test method is GB/T29416-2012 "Building Exterior Wall External Insulation System Fire Performance Test Method" Appendix C, Smoldering Characteristics Test

Product Introduction The smoke toxicity test device (squirrel cage method) is applicable to the GB/T 20285 "Material Smoke Toxicity Hazard Classification" test standard. The test principle is: the uniform quality of the strip sample is subjected to a constant velocity through a ring furnace with stable heating,using constant velocity moving scanning heating, the constant velocity carrier gas flow blows the flue gas in the quartz tube to obtain a stable flue gas flow, which is

Introduction: The BS 476-12 Ignitability Tester is designed according to the BS476-12:1991. Method of test for ignitability of products by direct flame impingement.The accuracy of the Ignitability tester meets the requirements of relevant standards and meets the control requirements for the accuracy of measurement. Standards: BS 476-12:Fire tests on building materials and structures - Part 12: Method of test for ignitability of products by direct flame impingement Structure:

ISO9239 FRPT.pdf Introduction: Critical Radiant Flux is the main parameters of the fire risk for flooring materials.It reflects the burning and spreading ability of flooring material specimen under external heat radiation conditions.It is an important index of combustion classification for building products. According to ISO9239-1,2 and GB/T 11785-2005 requirements,it measures the critical radiant of combustion floor coverings, through the radiation environment of test

Fire Propagation Index Testing Equipment for Laminated Foil BS476-6 FPT.pdf Introduction: BS 476-6 is a test method of measuring the flame propagation properties of materials, primarily for fire protection performance evaluation of the walls and ceilings, measurement results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp is 530J / S. 2 minutes and 45 seconds later, the two electric heater

NF P92-505 Dripping Testing Equipment for Melting Materials NF505-T dripping tester.pdf Introduction This tester meet international standards NF P92-505, EU 95/28 / EC, ECE technical specifications and requirements of R118 Annex 7 of these Regulations. According to NF P 92-505 request, the test is additional test for M-class building materials. It is suitable for hot melt material effect in the primary heat source to evaluate the performance of dripping and burning performanc

BS-476-7 Surface Spread Flame Test Equipment Introduction BS 476 Part 7 specifies a method of test for measuring the lateral spread of flame along the surface of the specimen of a product orientated in the vertical position under opposed flow conditions, and a classification system based on the rate and extent of the spread of flame. It provides data suitable for comparing the end-use performances of essentially flat materials, composites or assemblies, which are used

Fire Tests on Building Materials and Structures for Fire Propagation Introduction BS 476 part 6 specifies a method of test, the result being expressed as a fire propagation index, that provides a comparative measure of the contribution to the growth of fire made by an essentially flat material, composite or assembly. It is primarily intended for the assessment of the performance of internal wall and ceiling linings.​ Feature Stainless steel support frame and Calcium silicate

NF P92-505,95/28/EC Dripping Test Apparatus Introduction The dripping test according to NF P 92-505 is a reaction to fire complementary test for M classification of building and fitting materials. It is used for thermal melting materials for which some inflamed or not dripping, produced by a heating source, were noticed during the main test. This apparatus can be either the electrical burner test for flexible and thin materials (NF P 92-503), or the radiation test (epiradiato

Flooring Radiant Panel Testing Equipment Introduction: Critical Radiant Flux is the main parameters of the fire risk for flooring materials, It reflects the burning and spreading ability of flooring material specimen under external heat radiation conditions, It is an important index of combustion classification for building products. According to ISO9239-1,2 and GB/T 11785-2005 requirements, and this tester is measuring the critical radiant of combustion floor coverings,

UL910,NFPA262,ASTM E84,UL723 Steiner Tunnel Tester Stucture 1.The Steiner Tunnel Tester is made of stainless steel .The internal dimensions of the combustion chamber is 305mm x 451mm and long 7.6m with firebricks laying which has satisfactory insulation property. 2.All internal fixtures are stainless steel which is rust resistant and corrosion resistant. 3.A double-deck quartz glass observation window is used to observe the position of flame spreading. 4.The height of the

EN 13823 Single Burning Item Test Machine EN13823 SBI.pdf Introduction Single burning instrument (SBI) was measured supplies (excluding floorings) performance at a single burning heat invasion conditions. Samples are placed inside the sliding flame (methane combustion sandbox boxes), under the exhaust pipe. Sample combustion reaction condition to accept dual monitor machine and visually. Heat and smoke release rate assessment instruments detect objects by observing performanc