Furniture Testing Equipment

Introduction: This fully automatic Oxygen Index Measuring Instrumentmeasures minimum oxygen concentration as necessary when specimen combustion. The oxygen sensor is adapted Paramagnetic Type which has a precise, long life, less error rate and high reliability. The Oxygen Index Measuring Instrument meets the requirements of standards like ASTM D2863, ISO 4589-2, NES714 and so on. Features: 1. Oxygen sensor, accuracy

16 CFR 1633 Mattress Flammability Testing Equipment AIC-9705 Mattress Flammability Test Equipment.pdf Introduction This mattress test apparatus is designed according to GB/T 34441-2017, it can test combustion performance of soft furniture mattress exposed to flame ignition source. The test part of this equipment can meet the requirements of GB/T 20286, GA 111-1995, ISO 9705-2, GB/T 27904-2011 and GB/T 25207-2010 "Test Method for Solid Room Fire of Surface Products" Standards

Anti Igniting Test Machine for Mattress and Sofa Introduction The Anti Igniting Test Machine is an analog cigarettes and matches as flame ignition source for resistance to ignition of upholstered furniture conduct test methods and evaluation. This section applies to public places with mattresses, sofas and other upholstered furniture resistance to ignition test and evaluation, furniture Soft package resistance to ignition. Standard: ISO 8191-1~2:1988:ISO 8191-1:1987 Furniture

NPF-2 Textiles and Films Flame Propagation Tester NFPA 701-2 Flammability Tester.pdf Introduction: NFPA 701: 2004 & 2009 are standards for fire-retardant fabric and film material combustion test, published by the National Fire Protection Association.The standards are widely used in the United States, for public curtains and other hanging fabrics, which not water resistant fabric. This machine is made according to the US Fire Department NFPA 701 method . According to different

Flame Propagation of Textiles and Films Apparatus Introduction This Flame Propagation Apparatus is mainly designed based on NFPA 701,which regulations fabrics and films flame propagation test method for fabrics.And it applies to curtains and drapes, curtains, or other shelter materials windows, awning, tent, waterproof cloth and fabric structure similar construction and banners. Standards National Fire Protection Association (NFPA) NFPA 701: 2004 & 2009 Edition Test Method 1

Introduction: Vertical Flame Spread Properties Tester is suitable for the measurement of limited flame spread properties of protective clothing. The flame from the burner is applied for 10 s to the surface or the bottom of textile specimens which are vertically oriented. Features: Vertical Flame Spread Properties Tester s designed and manufactured according to ISO 15025 standards. It can be updated to meet the requirement of ISO6941, ISO 6940 etc by using different specimen

Rate of Heat Release (OSU) Tester Introduction: The OSU heat release rate tester, originally designed by Smith of Ohio State University in 1972, became FAA's designated combustion tester. The test standards are FAR Part 25 Appendix F Part IV, Airbus AITM 2.0006, Boeing BSS 7322 and ASTM E906. The Heat Release Rate (OSU) test is used by the aerospace/aviation industry to determine the heat release rate of cabin compartment materials when exposed to radiant heat. It is most

ASTM E1537 Upholstered Furnite Large Calorimeter INTRODUCTION This large calorimeter is designed according to ASTM1537-16,ASTM C1822-17,ASTMC1590-17, this calorimeter can complete the combustion performance test of soft furniture mattress exposed to flame ignition source. The test part of the calorimeter can meet the requirements of ASTM1537-16,ASTM C1822-17,ASTMC1590-17 and Test Method for Solid Room Fire of Surface Products" Standards GB/T 34441-2017 GB/T 20286-2006 GA 111

Introduction: ASTM D4151 Standard provides a means to identify blanket fabrics which ignite easily and propagate flame across the surface. This test method specifies the procedures described in the "Voluntary Blanket Flammability Standard" which has been used by the blanket industry in the United States since 1972.​​ Features: This Blanket Fabrics Flammability Tester can determine the burning characteristics of Blanket fabrics under controlled conditions. Stainless steel test

Introduction: Due to the young children lack of awareness of danger, when pajamascomesinto contact with fire, it can cause burning and jeopardize safety. This makes such products safe for the flammability of children's sleepwear is one of the more important aspects of the problem. Some developed countries have formulated relevant technical regulations and standards for fire-retardant performance of requirements for children's sleepwear.These products are tested in accordance

Horizontal and Vertical Flammability Apparatus Introduction: Horizontal and Vertical Flammability Apparatus is designed according to plastic Materials flammability test method. It is used to test flammability, burning rate, flame spread, burning flame retardancy. This machine has high degree of automation, and its test data is accurate. Standards UL94 V-0,V-1,V-2,IEC 60695-11-10,IEC 60707,ISO 1210 Main Features Cabinet and fixture features: 1.1 Case Dimensions: Length 1200mm

16 CFR 1633 Flammability of Mattress Test Chamber Introduction This test equipment is designed according to GB/T 34441-2017, it can test combustion performance of soft furniture mattress exposed to flame ignition source. The test part of this equipment can meet the requirements of GB/T 20286, GA 111-1995, ISO 9705-2, GB/T 27904-2011 and GB/T 25207-2010 "Test Method for Solid Room Fire of Surface Products" Standards GB/T 34441-2017 GB/T 20286-2006 GA 111-1995 ISO 9705-2 GB/T

Introduction: The CCT Cone Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet can be moved, it can be used for cone calorimeter test, and can also be used in the large heat release rate test system such as Single Burning Item(SBI), cable burning test system, etc. Measured Properties by CCT Cone Calorimeter: Heat release rate Time to ignition Mass loss rate Smoke

UL94 Horizontal Vertical Flame Test Machine Introduction UL94 flame test machine is designed according to plastic Materials flammability test method. It is used to test flammability, burning rate, flame spread, burning flame retardancy. This machine has high degree of automation, and its test data is accurate. Standards UL94 IEC 60695-11-10,IEC 60707,ISO 1210 Main Features Cabinet and fixture features: 1.1 Case Dimensions: Length 1200mm X width 600mm X height 1300mm; 1.2

Introduction: SPI Vinyl Plastic Film 45° Flammability Tester is specified apparatus for flammability of vinyl plastic film according to 16 CFR1611.​​​ The SPI 45 degree flame tester is manufactured in accordance with the American Flammable Fabric Regulations (FFA), which is a mandatory testing standard required by the US Consumer Product Safety Commission (CPSC). It is mainly used for the flame retardant performance testing of polyethylene plastic film materials. The scope of

Introduction: ASTM D4151 Standard provides a means to identify blanket fabrics which ignite easily and propagate flame across the surface. This test method specifies the procedures described in the "Voluntary Blanket Flammability Standard" which has been used by the blanket industry in the United States since 1972.​​ Features: 1.Blanket Fabrics Flammability Tester can determine the burning characteristics of Blanket fabrics under controlled conditions. 2.Stainless steel test

Small-scale Horizontal Burning Characteristics Test Machine Introduction This horizontal burning characteristics test machine is dsigned according to international standard ISO9772 :Determining the combustion properties of the foam plastic by horizontal combustion test method. For the determination of density of less than 250kg / m³ foam small sample combustion performance levels in a small flame. The PLC and touch screen can realize the intelligent measuring and provide the

Ignitability of Upholstered Furniture Testing Equipment Introduction The ignitability testing equipment is an analog cigarettes and matches as flame ignition source for resistance to ignition of upholstered furniture conduct test methods and evaluation. This section applies to public places with mattresses, sofas and other upholstered furniture resistance to ignition test and evaluation, furniture Soft package resistance to ignition. Standard: ISO8191-1~2 ISO 8191-1 Fire test

16 CFR 1633 Flammability Testing Equipment for Mattresses INTRODUCTION This mattress flammabiliy test instrument is designed according to GB/T 34441-2017, it can test combustion performance of soft furniture mattress exposed to flame ignition source. The test part of this instrument can meet the requirements of GB/T 20286, GA 111-1995, ISO 9705-2, GB/T 27904-2011 and GB/T 25207-2010 "Test Method for Solid Room Fire of Surface Products" Standards GB/T 34441-2017 GB/T 20286

UL94 Horizontal Vertical Flame Test Chamber I.Introduction The test is widely applied throughout industry, especially in electrical manufacturing, where it is widely used for the testing of electrical products. The test measures the burning rate of samples positioned either horizontally or vertically. II.Feature 1. A bench mounted draft free combustion chamber having a large inside volume of 0.75m3 2. Large door and window made from toughened safety glass giving a generous