Fire Testing Equipment

I .ISO 6942 EN 366 Thermal Radiation Resistance Tester for Protective Materials The thermal radiation resistance tester is designed to evaluate the thermal radiation protection performance of protective materials, complying with standards such as ISO 6942 and EN 366. The instrument supports two test methods: Method A involves a visual assessment of changes in the material's appearance following exposure to thermal radiation; Method B measures the Radiant Heat Transfer Index

I. ISO 9151 EN367 Heat Transfer Index Test Apparatus A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms used in previous versions of this test. HTI calculated from the mean time in seconds to achieve a temperature rise of 24±0.2ºC when testing by this method using a copper disc and a starting temperature of 25±5ºC. The heat transfer index provides a method of grading materials which does not imply

Product Description ENISO 9239-1 Floor Radiant Panel Testing Equipment for Floor Materials Critical Radiant Flux is the main parameters of the fire risk for flooring materials.It reflects the burning and spreading ability of flooring material specimen under external heat radiation conditions.It is an important index of combustion classification for building products. According to ISO9239-1,2 and GB/T 11785-2005 requirements,this Flooring Radiant Panel Test Apparatus measures

Product Description ISO 9239-1 Thermal Radiation Tester for Flooring Materials The Flooring Radiant Panel Tester is the cornerstone of the flooring materials reaction to fire tests in the Euroclass system. The tester measures the spread of flame of the sample, under thermal exposure, using a radiant heat ignition source. The thermal exposure is that of a fire growing in the room of origin that through a door opening, radiates onto the floorings in an adjacent room or corridor

Introduction The Electrical Burner Test Equipment is designed according to NF P 92-503, is designed to measure the fire retardant level and reaction to fire of flexible materials such as drapes, curtains, tight fitting decorative fabrics or wall covering. And also measure the burning behavior of materials which is possible to make an essential contribution to preventative fire safety and reduce the risk of fire in buildings. Main Features 1.France original electrical burner,

Product introduction The Flame Testing Equipment is designed and developed according to ASTP5007-2006, and shares the same control system with the alcohol burner combustion tester. Add gas control system and gas circuit to save cost for users. 1.Features of box and fixture 1.1 Chamber size: 535mm long x 535mm wide x 535mm high; 1.2. Paint baking treatment of box; The interior is baked with black paint (standard requirements) for corrosion resistance; 1.3 Air inlet and outlet

Product introduction The Transformer Fire Behaviour Test Machine is designed in accordance with GB1094.11-2007, IEC 60076-11-2018 and other relevant regulations. When a certain flow of intake air is supplied to the box, 24KW radiation illuminance is also provided for the sample. Carry out combustion test on the transformer sample under the condition of alcohol ignition, and record the smoke density in the smoke pipe and the test temperature of the sample. This test equipment

I.Product introduction The battery combustion jet test equipment is mainly used to test the flame resistance of the battery. The principle is to place the battery on a flame resistant and high temperature resistant mesh screen (the mesh screen has 20 holes every 25.4mm, and the diameter of the steel wire is 0.43mm), and then light the burner below it (38.1mm above the top of the burner). At the same time, observe the battery combustion until the battery explodes or burns down

Introduction The Combustible Gas Burning Rate Test Apparatus is developed according to the requirements of UL 9540A and the standard of ISO 871 Appendix C. The burning rate of combustible gas in the vertical glass tube and the relevant auxiliary parameters are recorded by the camera to measure the burning rate of combustible gas. The Combustible Gas Burning Rate Test Apparatus is mainly composed of combustion tube, ignition system, camera system, gas supply system and waste