Petroleum Testing Equipment

I.Brake Fluid Water Tolerance Tester ISO4925 This Water Absorption Test Instrument is suitable for evaluating the effect of water on brake fluid. The test principle involves adding humidified brake fluid to a conical centrifuge tube, keeping it at -40°C for 22 hours, then removing it and quickly observing the appearance of the sample, such as layering, precipitation, and transparency. After that, it is heated to determine the volume fraction of the centrifugal sediment. II.

I .GB29743.3 Fuel Cell Coolant Deionizer Compatibility Tester, Cyclic Ion Exchange Test Bench for FCEV Coolant The fuel cell coolant is filtered by the deionizer, and the color change of the sample is examined. II. Main Features 1. Equipped with stepless speed regulating circulating pump with digital display; 2. Digital timer to control test duration and achieve automatic stop; 3. Fitted with standard deionizing filter; 4. Digital display for liquid circulation flow rate; 5.

I. Introduction: The LAB135 type Saybolt colorimeter is used to determine the color of refined liquid petroleum products, such as undyed automotive gasoline, aviation gasoline, jet fuel, naphtha, kerosene, and medicinal white oil. The Saybolt color refers to the numerical value of the liquid column height that is closest to one of the three standard color plates when observed through the sample liquid column for comparison with the standard color plates. The Saybolt color

Introduction AIC131 is a new generation detector for octane and cetane measurement, with international advanced theory, it can measure the oil's octane and cetane precise value rapidly, store large amount of data; and all the results are printable. The interface is user-friendly. Its sensors adopt full-sealed design with alloying metal. With longer standby-cyclic charging battery, it applies in operation site, outdoor and lab. Main Features 1.AIC131 can measure both of

Summary This Saponification Number Analyzer is designed and manufactured according to GB/T 8021 "determination of saponification value of petroleum products", and is applicable to the determination of saponifiable components in petroleum products under test conditions. Dissolve the known quantitative sample in butanone, heat it together with quantitative potassium hydroxide ethanol solution, titrate the excessive alkali with hydrochloric acid standard solution, and calculate

Product Description ASTM D2809 Cavitation Corrosion and Erosion-Corrosion Characteristics Tester The test method of the instrument is: use a standard aluminum automobile water pump to pump the sample, make it run for 100 hours under the conditions of 113°C, 103kPa, and the pump speed of 4600r/min, and then check the water pump to determine the degree of cavitation corrosion. degree and are graded according to the grading system table. Product Parameters Characteristic 1. The

Product Description ASTM D93 Automatic PMCC Flash Point Analyzer According to GB261-83 and ISO2719-73 Closed Cup Flash Point Test Method,this Pensky-Martens Closed Cup Flash Point Analyzer adopts micro-computer processing technology and advanced PID temperature controlling technology,with fast temperature rising speed,accurate temperature controlling and test result. This procedures of whole test is automatic,and it has functions of automatic atmosphere correction,automatic

I.Introduction The odour of commercial liquefied petroleum gas (LPG) is usually caused by unsaturated hydrocarbons, sulfur-containing compounds, or added odorants. This instrument describes a method for evaluating the odor of commercial LPG. Test method:A liquefied gas sample that has been completely vaporized is diluted with purified air to achieve a concentration of the target gas in the mixture that is 20% of its lower explosive limit. At least three operators should be

I.Product overview This Copper Strip Corrosion Analyzer is suitable for measuring the degree of copper corrosion in liquefied petroleum gas. Test method:immerse a polished copper strip completely into a 100mL cylindrical sample with suitable working pressure that has been saturated with water, and let it stand at a temperature of 40 ºC for 1 hour. Take out the copper strip at the end of this period, compare it with the copper corrosion standard, and evaluate it according to

Introduction: Cold Cranking Simulator Apparatus is used to measure the apparent viscosity of engine oil at low temperature (- 35 ºC ~ - 5 ºC). Method summary: Drive a rotor closely matched with the stator by a DC motor, and fill the gap between the rotor and the stator with samples. The temperature is controlled by the temperature control system, and the motor speed is corrected with standard oil to make it a function of viscosity. Determine the sample viscosity by measuring

ASTM D6138 Grease Testing Machine Under Dynamic Wet Conditions (Emcor Test) Detailed Photos Product Description Introduction: This test method covers the determination of corrosion preventive properties of greases using grease-lubricated ball bearings under dynamic wet conditions. Woring principle:measure the grease's ability to protect the bearing from corrosion in the presence of water. The two sets of grease-coated bearings were partially immersed in water and rotated at a

Product Description Product Description The TFOUT instrument adopts a full-automatic control system. The operator can automatically test and print the results as long as the sample is put into the instrument. The whole process does not require manual conduct. The principle is to put the sample, distilled water and copper catalyst coil into the glass tube together, and then put it into the oxygen bomb. The oxygen bomb is filled with oxygen at room temperature and put into the

Product Description Introduction: This Thermal Stability Test Instrument is suitable for testing the stability of Unused mineral oil and synthetic hydrocarbon heat transfer fluids. The use method is as follows: under a certain test temperature, heat the sample in isolation from the air for a specified time, then observe and record its appearance, calculate the quality of gas-phase decomposition products, conduct gas chromatographic analysis on the samples before and after

Detailed Photos Product Description Summary KV-R5 Kinematic Viscosity Tester is designed and made as per the industrial standard of People's Republic of China SY/T5651 Technical Condition of Petroleum Products Kinematic Viscosity Tester, GB/T 265 Petroleum products-Determination of kinematic viscosity and calculation of dynamic viscosity and ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids. It is suitable to determine kinematic