Hard Metal Alloys

Tungsten steel, also known as cemented carbide, is a sintered composite material consisting of at least one metal carbide. The grain size of the carbide component (or phase) is usually between 0.2 and 10 microns, and the carbide grains are held together with a metal binder. Bonder usually refers to metal drill (CO), but for some special uses, nickel (Ni), iron (Fe), or other metals and alloys may also be used. Tungsten steel (hard alloy) has a series of excellent properties

Cemented carbide round die YG8 wear-resistant tungsten steel die product introduction 1. Adopt 99.95% high purity raw material tungsten carbide powder and cobalt. 2. The hardness of the cold heading mold is more than HRA90 degrees, and the bending strength is up to 2520. 3. It has high wear resistance and impact resistance. Cemented carbide round die YG8 wear-resistant tungsten steel die application range Suitable for cold heading cold stamping of copper, aluminum, steel,

Brief introduction of powder metallurgy non-magnetic alloy magnetic tile mold: Powder metallurgy non-magnetic alloy magnetic tile mold has superior performance, so it is widely used in industry. Good wear resistance and high hardness, so that it is suitable for the manufacture of high temperature resistance, friction, corrosion wear-resisting parts, machinery parts and drawing die, etc. In recent years, cemented carbide has become a better choice to replace steel in a variety

Method for representation of cemented carbide A. Tungsten and cobalt cemented carbide The main components are tungsten carbide (WC) and binder cobalt (CO). The brand name is composed of "YG" (" hard and cobalt "in pinyin) and the average percentage of cobalt content. For example, YG8, means average WCO =8%, the rest is tungsten-cobalt carbides for tungsten carbide. B. Tungsten-Titanium-Cobalt cemented carbide The main components are tungsten carbide, titanium carbide (TiC)

Introduction to M10 non-magnetic tungsten steel M10 non-magnetic alloy, refers to no magnetic or weak magnetic cemented carbide material, non-magnetic cemented carbide material research and development and production of new cemented carbide material is of great significance, excellent non-magnetic performance. Continued to the final product, just depending on the amount of chlorine and shape is different, and has the degree of difference, now the use of non-magnetic cemented

Application (1) engineering machinery and equipment: loaders, bulldozers, excavators; (2) handling machinery and equipment: unloading mill chain plate, hopper liner, grab the edge plate, and automatic tipper tipping plate; (3) of construction machinery equipment: Cement pusher plate, concrete mixer liner, mixing building lining board. Dust collector liner; (4) metallurgical machinery equipment: iron ore sintering conveying elbow, iron ore sintering machine liner, scraper

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, can take welding plug welding, bolt connection and other structures are connected with time in the maintenance process, convenient, widely used in metallurgy, coal, cement, electric power. Glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has attracted more and more industries and manufacturers

Advantages: 1) The biggest advantage of 200 series stainless steel is that it is cheaper than 300 series stainless steel. 2) Under the condition of weak decay, ASTM 202 stainless steel can almost completely replace 304 stainless steel. 3) It is widely used in building decoration, kitchen utensils, sanitary equipment and appliances, household appliances, transportation and equipment and parts of the industry. Material tungsten steel alloy Specifications Round bar Diameter:0.1

The four basic stages of tungsten steel sintering process: 1. Remove the forming agent and the pre-firing stage. In this stage, the sintered body changes as follows: The removal of molding agent, sintering initial stage with the rise of temperature, molding agent gradually decomposition or vaporization, eliminate the sintering body, at the same time, molding agent more or less to the sintering body carburization, carburization amount will change with the type of molding agent

Definition of cemented carbide Cemented carbide is made of W, Mo, Cr, Ti, Zr, Hf, V, Nb, Ta nine kinds of carbonization and Fe (Fe, Co, Ni) metal combined with the general name of the alloy, generally refers to the WC-Co alloy. Usually when the material hardness is high, the wear resistance is high; When the bending strength is high, the impact toughness is high. However, the higher the hardness of the material, the lower the bending strength and impact toughness. HSS is

Modern industrial mass production pays more attention to production efficiency and yield, which considers the high quality performance of materials for the use of tool products. Precision mold, equipment supporting the use of tungsten steel processing precision parts products need good physical stability as the basis, especially durable, wear resistance performance is undoubtedly the key requirements, which for tungsten steel material can fully meet the requirements of use.

Tungsten steel hexagonal punch production carbide hexagonal punch processing Cemented carbide hexagonal punch, cemented carbide punch is a mechanical part used as a precision mold matching, also called cemented carbide punch, mainly used for punching hardware parts or electronic parts, of course, can also punching other non-metal parts, even belt holes, plastic holes, etc. Its application field is very wide, because it has the characteristics of acid and alkali resistance,

Tungsten steel roll Use for photovoltaic welding tape and FFC wire making The characteristics of High precision, runout degree, roundness

Special-shaped tungsten steel parts Our Services 1. Support non-calibration 2. Provide the most competitive products and services 3.Provide tungsten steel application solutions 4.Extremely accurate tolerance standards

tungsten steel alloy sawtooth blade hard metal high hardness customization Dear friends, the blade material of the computer wire stripping machine is divided into three types: white steel (hardness 58), high-speed steel (hardness 68), and tungsten steel (hardness 88). The blades are all finely ground by a grinder, and the quality is guaranteed. If you don't know what to use For material, please consult customer service. Special note: The tungsten steel material is very hard

tungsten steel alloy strip-shaped blade hard metal high hardness customization Flat knife: suitable for stripping flat wireV knife: suitable for the outer diameter of 4.0mm or thicker wire, the size can be adjusted Flat knife: suitable for stripping flat wire V knife: suitable for the outer diameter of 4.0mm or thicker wire, the size can be adjusted Cutter: Straighten the head of the thread Round knife: suitable for all round lines, the blade size is 2.0-14mm, 2.0-10mm

tungsten steel alloy strip hard metal high hardness customization Carbon steel can get higher hardness and better wear resistance after heat treatment.The hardness of carbon steel in annealed state is verv moderate, and it also has good machinability. Carbon steel raw materials are very common, easy to get, and the production cost is relatively low. Product name tungsten steel strip Brand name forged OEM Available Parameter customized Packaging Information G.W.: Depends on

tungsten steel punch round mould hard metal superior quality Superhard tungsten steel blanking punch: Companies can customize according to customer demand for the production of various kinds of tungsten steel, ASP23, SKD11 or different materials such as precision round punch punch, the material can also be selected according to the needs of customers, the company produced the punch has the characteristics of high accuracy, high hardness, high life, using the number can reach

tungsten steel skinning mould hard metal superior quality outlet Carbide peeling mold: used for a variety of materials, this mold durable, reliable quality, easy to customize according to customer requirements special-shaped peeling mold, welcome to buy. Blanching die: from more than 0.2 holes, to various shapes of blanching holes, whether it is tungsten steel or ASP23 and other materials of high hardness, processing difficulty of the company can be manufactured, accuracy of

tungsten steel two-place diplopore mold hard alloy customizable size Poly Crystalline Diamond (PCD) wire drawing dies that can be used for ferrous and non-ferrous wire drawing applications. Sizes are available for drawing applications ranging from ultra-fine wire to large drawn rod. This size range include 0.040 to 35 mm (.00157 - 1.378"). PCD dies offer a high resistance to wear and an excellent wire surface finish. Copper wire , Aluminum wire , Tungsten wire , Molybdenum