SS Steel Control Line Tubing

Incoloy 825 (UNS N08825) SS Steel Control Line Tubing 60-120 Mpa Because Incoloy 825 alloy is rich in Cr, Mo, Cu, it has good general corrosion resistance to oxidizing acid and non-oxidizing acid. Especially it has extremely high corrosion resistance to sulfuric acid. Due to the high content of Cr, Mo and Ni, it has excellent pitting corrosion resistance, crevice corrosion resistance, and stress corrosion cracking resistance in a chloride environment. Incoloy 825 alloy

Duplex 2205 Hydraulic Control Line Tubing Control line is normally used to operate surface controlled subsurface ety valves. Tiptop specializes in providing control lines that can meet the specific requirements of each customer. The control line with ASTM specifications can be offered in wide range of metallurgies. Encapsulated control line is also available which can improve the crush and abrasion resistance of the control line. Encapsulated control line is available in

Incoloy 825 Coiled Control Line Tubing We are professional Incoloy 825, incoloy825, alloy825, Alloy 825, UNS N08825 Stainless steel coiled control line tubes/pipes/tubing, Hydraulic Control lines, Chemical Injection Lines supplier from china The outer diameter of Incoloy 825, incoloy825, alloy825, Alloy 825, UNS N08825 Stainless steel coiled control line tubes/pipes/tubing, Hydraulic Control lines, Chemical Injection Lines that we could do is in 1/8", 1/4", 1/2", 3/8", 3/4&qu

ASTM Alloy Steel Coiled Control Line Tubing Detailed product description 1.Specification:Stainless steel coil tube coiled tube coil tubing 2.Type: welded or seamless 3. Standard: ASTM A269, ASTM A249, 4. Stainless steel coil tube OD: 6mm to 25.4MM 5.Length:600-3500MM or as per customer's requirment. not welding 6. Wall thickness: 0.2mm to 2.0mm. 7. Tolerance: OD: +/-0.01mm; Thickness: +/-0.01%. 8.Surface: Bright or anneald 9. Material: 304, 304L, 316L, 321, 301, 201, 202, 409

Inconel 625 Coiled Hydraulic Control Lines We are professional Inconel 625, inconel625, alloy625, Alloy 625/UNS N06625 Stainless steel coiled control line tubes/pipes/tubing, Hydraulic Control lines, Chemical Injection Lines suppliers from China The outer diameter of Inconel 625, inconel625, alloy625, Alloy 625/UNS N06625 Stainless steel coiled control line tubes/pipes/tubing, Hydraulic Control lines, Chemical Injection Lines that we could do is in 1/8", 1/4", 1/2", 3/8", 3/4

316L SS Cold Drawn Seamless Control Line Tubing for oil and gas well 316L grade stainless steel, is the second most common austenitic stainless steel after 304 stainless steel. Its primary alloying constituents after iron, are chromium(between 16–18%), nickel(10–12%) and molybdenum (2–3%), with small (

TP304 Bright Finish Surface Stainless Steel Control Line Tubing Stainless steel tubing coil have excellent high temperature resistance and corrosion resistance, compared to cooper tube, stainless tube thickness can be reduced 30% - 60%, not too thin and too thick, it is not rust and sanitary, reducing maintenance time, saving cost, easy to install and change. Tp 304 Material consists of 18% chromium and carbon, manganese, phosphorus, sulfur, silicon and nickel in the

ASTM - A269 Coiled tubing Stailess Steel 316L 1 / 8 control line tubing We are specialized in providing stainless steel coiled tube, stainless steel control line, stainless steel testing cable, stainless steel capillary tube, stainless steel continuous tube, stainless steel seamless tube, stainless steel welded tube as well as stainless steel multi –core tubes for shipbuilding and other stainless steel products. All the products conform to the standards of ASTM A269 and

Grade 316L Stainless Steel Coiled Tubings for subsea application ASTM A269 Grade 316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. Compared to chromium-nickel austenitic stainless steels, 316L stainless steel offers higher creep, stress

3 / 8 ASTM B704 Stainless Steel ControL Line Tubing Alloy 625 ASTM B704 Size Chart OD Wall (inch) Materials Standard Working Pressure (MPa) Length 1/8" 0.02,0.028,0.035 Austenitic steel 304L (UNS S30403) Austenitic steel 316L (UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625) ASTM-A 269 ASTM-A 632 ASTM-A 789 ASTM-B 704 60-120 Mpa Customized 3/16" 0.02,0.028,0.035,0.049 1/4" 0.02,0.028,0.035,0.049,0

1 / 4 * 0.065 Stainless Steel ControL Line Tubing 316L ASTM A269 Our products are employed in a variety of applications including hydraulic controls, instrumentation, chemical injection, umbilicals and flowline control. In addition, regular inspections are performed at each mill and all tubing is inspected thoroughly prior to shipping. Hydrostatic test and other technical documents are available for all products. Size Chart OD Wall (inch) Materials Standard Working Pressure

1 / 4 * 0.049 Duplex 2205 Stainless Steel ControL Line Tubing ASTM A789 Tiptop offers a variety of duplex stainless steel, super duplex stainless steel welded and seamless tubing, depending upon the properties the tubing is required to exhibit. Other alloys and sizes are also available upon request. Duplex stainless steels (named for their austenite and ferrite compositions), has greater yield strength than austenitic stainless steel. Super duplex stainless steel 2507 (S32750

1 / 4 * 0.049 Duplex 2205 Stainless Steel ControL Line Tubing ASTM A789 Size Chart OD Wall (inch) Materials Standard Working Pressure (MPa) Length 1/8" 0.02,0.028,0.035 Austenitic steel 304L (UNS S30403) Austenitic steel 316L (UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625) ASTM-A 269 ASTM-A 632 ASTM-A 789 ASTM-B 704 60-120 Mpa Customized 3/16" 0.02,0.028,0.035,0.049 1/4" 0.02,0.028,0.035,0.049,0

3 / 8 * 0.049 304L Welded Stainless Steel ControL Line Tubing ASTM A269 Instructions for 3/8”Hydraulic control line The 3/8“ hydraulic control line is mainly used to inject chemicals into oil and gas wells. That is, the 3/8” hydraulic control line is connected to the downhole chemical injection valve, and the descaling is performed through the 3/8“ hydraulic control line and the chemical injection valve. Chemical agent is injected from the surface into the oil tube at a

3 / 16 * 0.035 316L Stainless Steel ControL Line Tubing ASTM A269 Our products have complete specifications and can meet all working conditions. The outer diameter range of 316L control line tubing we supply is from 1/8" to 1/2". All dimensions and corresponding parameters are listed in the table below, we can also customize it according to customers' requirement details. OD Wall (inch) Materials Standard Working Pressure (MPa) Length 1/8" 0.02,0.028,0.035 Austenitic steel

1 / 2 ASTM A789 2507 Duplex Steel Control Line Tube Chemical Injection Tube Tiptop offers a variety of duplex stainless steel, super duplex stainless steel welded and seamless tubing, depending upon the properties the tubing is required to exhibit. Other alloys and sizes are also available upon request. Duplex stainless steels (named for their austenite and ferrite compositions), has greater yield strength than austenitic stainless steel. Standard: ASTM-A 789 Standard

1 / 4 OD Austentic Steel 316L Bared Stainless Steel Control Line Tubing UNS S31603 We are able to offer 1/4” OD Bared Control Line with material Austentic Steel 316L( UNS S31603) , Wall Thickness 0.049” and 13,000 psi Working pressure. Our manufacture processes are portrait welded + seamless treatment on surface, and our products conform to the standards of ASTM A269 and related industrial standards. Length can also be customized according to customer requirements. With

3 / 16 * 0.035 Stainless Steel Control Line Tubing Austenitic steel 304L 304L stainless steel control line tubing is a very common stainless steel tubing. Its corrosion resistance is better than 201 and 202. Due to its corrosion resistance and high temperature resistance and good processing performance, it is widely used in mechanical equipment, sanitary ware, fluid transport, chemical instruments, furniture decoration industry and food industry. Though the price of 304L is

1 / 4 * 0.049 Inconel 625 Stainless Steel Control Line Tubing SSSV ASTM B704 Inconel 625 is a nickel-base alloy used both for its high strength and outstanding aqueous corrosion resistance. The strength of alloy 625 is primarily a solid solution effect from molybdenum and columbium. Alloy 625 has excellent weldability and is frequently used to weld AL-6XN® alloy. Matching filler metals are also used to join dissimilar metals. Instructions for 1/4”Hydraulic control line 1/4

Inconel 825 ASTM B704 Stainless Steel Control Line Tubing 1 / 4 for SSSV TIPTOP produces high integrity and quality controlled stainless steel, duplex and super duplex control line tubing used in demanding subsea umbilical applications. The super duplex seam welded and redrawn product is designed to offer a lower cost alternative with equivalent performance to traditional seamless subsea control lines. Flowline control line tubing is also available for use in pipe-in-pipe