Francis Hydro Turbine

Mixed-Flow Type Hydro Turbine Unit Introduction of mixed-flow type hydro turbine unit The mixed-flow type hydro turbine unit is widely used in hydropower stations because of its features of high water head and medium flow water power resources. With continuous development in hydropower products, our company has accumulated rich experience in the design and manufacture of mixed-flow type hydro turbine unit, gradually forming a complete and wide range of excellent mixed-flow

Vertical / Horizontal 90MW Francis Hydro Turbine The performance of Francis turbine Application range: wide range of application head: 20m-700m Structural features: simple structure, high strength of the runner Performance characteristics: Highest efficiency. The highest efficiency is 95%. Disadvantages: the blades are fixed, it is difficult to adapt to the changes of water head and load, and the efficiency is reduced under non-design conditions. Specification Water Head 20m

107rpm~1000rpm Speed Hydro Power Electric Francis Turbine Generator Specification Water Head 20m-200m Power range 50KW-150MW Flow 0.15-10m³/s Frequency 50HZ/60HZ Generator Voltage 400V, 800V, 6300V, 10500V Layout pattern Horizontal or Vertical Material Stainless Steel ZG0Cr13Ni4Mo Excitation Brushless or Static excitation system Lifespan 50 years Generator Insulation F/F Francis turbine is a kind of turbine suit to water head 20-300meters and with certain suitable flow. It

10m3/S Flow Vertical / Horizontal Francis Hydro Turbine Quick detail The Francis turbine has compact structure, high efficiency, and can adapt to a wide range of heads. It is currently one of the turbine types widely used in countries around the world. The main components of Francis turbine include volute, seat ring, water guide, top cover, runner, main shaft, guide bearing, bottom ring, draft tube, etc. Our advantage The strong points of our product are water turbine

Wide Flow Range Francis Hydro Turbine For Hydropower Energy Source Project Feature 1. It has high specific speed, small size of the unit, low cost, full utilization of the water head, and high efficiency at full load 2. The specific speed range of Francis turbine is generally ns=50∽300 3. The use head is H=30∽700m. Applicable Range Head: 20-200m Flow: 0.15-10m3/s About us The strong points of our product are water turbine generator set with capacity ranging from 1MW to 50 MW;

Stainless Steel Or Cast Steel Francis Hydro Turbine quick detail The Francis turbine is a reaction turbine, which means that the water changes pressure as it moves through the turbine, giving up its energy. First, high pressure water enters the turbine through the spiral casing surrounding the guide vanes. Then water passes through guide vanes where it is directed to strike the blades on the runner at optimum angles. As the water flows through the runner its pressure and

20-200m Head Francis Hydro Turbine Generator With Large Number Of Moving Parts Introduction Dongfeng is capable of designing and manufacturing the Francis type, Kaplan type, Tubular type, Impact and Pumped Storage Hydro Generator Set with unit capacity up to 150 MW, and conventional steam turbine, TRT, gas turbine, cogeneration steam turbine generator set of unit capacity up to 60 MW , and wind turbine generator set of unit capacity from 1 MW to 3 MW. Specification Water Head

Complex Design High Head Rotational Speed Francis Hydro Turbine what is Francis Hydro Turbine ? The water flow of the Francis turbine flows into the runner from the horizontal direction around the turbine to the center (radially enters), and then turns to the downward exit. The water flows into the runner and pushes the runner when passing through the blades in the direction of the axis, while passing downwards The blades also push the runner. That is to say, the water flow

Inline Linkess Francis Turbine Quick detail The Inline Linkess Francis turbine was jointly developed between Tokyo Electric Power Company, Tokyo Electric Generation Company and Tanaka Hydropower and commercially released in 2007. It was developed expressly for the purpose of installation within space restricted areas such as existing pumping stations, water treatment facilities, and drainage systems. The applicable head and flow range is narrower than a conventional Francis

Francis Hydro Turbine Quick detail The Francis turbine is a reaction turbine, which means that the water changes pressure as it moves through the turbine, giving up its energy. First, high pressure water enters the turbine through the spiral casing surrounding the guide vanes. Then water passes through guide vanes where it is directed to strike the blades on the runner at optimum angles. As the water flows through the runner its pressure and angular momentum reduces. This