Hydro Turbine Generators

2x25.5mw Tubular Turbine Hydro Turbine Generators Introducton of tubular turbine The water flow between the guide vane and runner of the tubular turbine basically has no change of direction. In addition, the straight cone-shaped draft tube is adopted, so that the discharge does not need to be turned in the draft tube, so the efficiency is high, the flow capacity is large, and the number of revolutions High, especially suitable for low-head small riverbed power stations with a

Eco Hydroelectric Power 3x28MW Hydro Turbine Generators Introducton of Axial Flow Hydro Turbine Axial-flow turbines are suitable for power stations with lower heads. Under the same water head, its specific speed is higher than that of a Francis turbine. The blades of the axial flow fixed-blade turbine are fixed on the runner body. The general installation height is 3-50m. , The blade setting angle cannot be changed during operation, the structure is simple, and the efficiency

700mm~4000mm Butterfly Valve Diameter Hydro Turbine Generators The role of butterfly valve in hydropower station The main functions of closing the water inlet of the water-guiding mechanism of the hydro-turbine generator set are as follows: 1. Close the water inlet, and no water can pass through the guiding blades, and the dao hydro-turbine generator set can enter the maintenance state and the static water test state, such as simulated boot , Shutdown,'load rejection test,