Pelton Hydro Turbine

Hydroelectric Power Plant 60MW Pelton Hydro Turbine The characteristics and scope of application The bucket type turbine is also called the Petion turbine. It relies on the jet from the nozzle to impact the bucket blades along the tangent direction of the runner circumference. Bucket turbines have higher application heads. Small buckets are used for heads of 40-250m, and large buckets are used for heads of 400 to 4500m. Advantage of Impact Type Pelton Hydro Turbine 1. Adapt

Francis Hydro Turbine Quick detail The Pelton turbine extracts energy from the impulse of moving water, as opposed to reactive turbines such as the Francis turbine. Water passes through a nozzle(s) and strikes the buckets arranged on the periphery of a runner which causes the runner to rotate, producing mechanical energy. The buckets were designed so that when the rim runs at half the speed of the water jet, the water leaves the runner with very little speed, extracting

1064m High Head 60000kw Pelton Water Wheel Turbine Application Pelton Water Wheel Turbine are used in high-head, low-flow hydraulic environments, so hydropower stations are located in remote mountainous areas. Dams are built to store water in mountain creeks. The water is delivered to the open channel through the dam, and the water flows through the mountains for several kilometers or more than ten kilometers to reach the front pond of the power station. An overflow weir is

Corrosion Resistant 4500kw Impact Type Hydro Turbine Technical parameters Vertical shaft impact type Rated power(KW):4500~60000 Horizontal shaft impact type Rated power(KW):110~7500 The introduction of impact type hydro turbine The impact type hydro turbine is one of the main turbine products of our company. Since the 1980s, after more than 30 years of development, our company's impact turbines have evolved from single nozzle to six nozzles of which the product type is

Maximum Unit Capacity 60MW Impact Type Pelton Hydro Turbine Advantage of Impact Type Pelton Hydro Turbine 1. Adapt to the situation where the ratio of flow and head is relatively small. 2. The weighted average efficiency is very high, and the efficiency is very high in the entire operating range. In particular, Pelton Hydro Turbine are now advanced and can achieve an average efficiency of over 91% in the load range of 30% to 110%. 3. Strong adaptability to changes in water