One Way Clutch Bearing

DC Sprag Type Clutch Brief Introduction Type DC is a sprag type freewheel cage without inner or outer races. It must be installed in a design providing races, bearing support for axial and radial loads, lubrication and sealing. The DC type version-N accepts all types of lubricants currently used in the power transmission equipement. The sprag space tolerance must not be exceeded. Inner and outer races must both have a minimum plain width “e”, without any recess, to ensure the

ASK40 C4 Clearance Backstop 40MM One Way Clutch Bearing Features 1. Type ASK is a roller type freewheel bearing supported by two rows of roller bearings. 2. The standard radial clearance is C4 3. Shaft tolerance should be h6 or j6 4. Type ASK freewheels can not accept axial loading. In cases of such loads, thrust bearings must be provided Technical Datas Model ASK40 Materail GCr15 Inner Diameter 40mm Outer diameter 68mm Thickness 15mm Torque capacity 72Nm Drag Torque 15Ncm

Industrial B200 P6 Precision Sprag One Way Clutch Bearing Features Type S200(B200) is a non bearing supported sprag type freewheel. The sprags run directly on the shaft provided by the user. Bearings are required to support axial and radial loads. Available size: S203(B203) S204(B204) S205(B205) S206(B206) S207(B207) S208(S208) S209(B209) S210(B210) Application: Backstop, indexing clutch Delivery time: 7-10 days after order confirmed Package: wooden box or customized Payment

CSK8-CSK40 Sprag Freewheel One Way Clutch Bearing Factory Fearures Types CSK and CSK...2RS are sprag type freewheels integrated into 62.. series ball bearings (except size 40). They are bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” type seals is recommen-ded especially when the working temperature exceeds 50°C. Oil bath lubrication is also possible. In addition to the basic CSK model, type CSK..P

ASNU NFS TFS Chrome Steel Freewheel One Way Roller Bearing Features ASNU NFS TFS is a roller type freewheel non-bearing supported. Bearing are supporte axil and radial load. Lubrication and sealing must be also provided by installation. Since ASNU NFS type one way clutch is a roller type without bearing supported, bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. The inner race is keyed to the shaft.

CK-A4090 CKA4090 Sprag Backstop One Way Clutch Bearing Features Type CK-A is a sprag type freewheel non-bearing supported. Nominal dia.-Direction diameter is a standard ball bearings dimension. Bearings are required to support axial and radial loads. Units are delivered grease Iubricated. The standard arrangement is to install this type besides a bearing with the same housing diameter tolerance. The inner race and the outer race are keyed to the shaft and hole. This series

FE448Z Freewheel Cage Sprag One Way Clutch Bearing Features The sprags are evenly spaced around the circumference of the insert element cage. The insert element cage does not come in contact with the inner or outer races; it remains absolutely loadfree under any application. Sprag type freewheel clutches with a plastic cage in their standard design are also available as a special design with a steel cage on request. Operating temperature: Steel cage: max. 170C Plastic cage:

BB17 BB171K-K BB172K-K Cam Clutch 1800RPM One Way Sprag Clutch Feature 1. BB series Cam Clutch is designed for press fit installation. 2. BB-1K-K and BB-2GD 1K-K series have a keyway on the inner race. Keyways, except size 25 are manufactured to DIN 6885. 3, BB40-1K-K and BB40-2GD 1K-K are manufactured to DIN 6885. 1. 3. BB-2K-K series has a keyway on both the inner and outer race. “-K” means keys shipped together with Cam Clutch. 4. Correct interference dimensions at the

FK FK-2RS Freewheel One Way Bearings FK6204 FK6204-2RS Features of freewheel one way bearings Width 12 / 14 / 15 / 16 / 17 / 18 mm Operating temperature max. 140°C Higher temperatures on request max. 110°C (design 2RS with RS seals) Lubrication Series FK 2RS with seals Operative lifetime grease lubrication Series FK without seal discs Oil or grease lubrication Delivered with corrosion protection. Installation Installation tolerances Shaft n6; hub N7 Mating parts Hardening and

FND442Z Freewheel One Way Clutch Bearings Manufacturer Features Bearing The freewheel clutch includes ball and roller bearings. Additional external bearing support is not necessary. Press fit pressure Press fit pressure must not be applied to the balls. Clamping direction The arrow on the inner ring designates the inner ring's clamping direction. Width 34 mm Operating temperature max. 100°C Lubrication Operative lifetime oil lubrication Installation tolerances Shaft js6 (k5);

GCr15 Sprag Type Freewheel One Way Clutch Bearing Features The Uk..zz series is a freewheel incorporating a 62..series bearing. The self-centring freewheels are already greaselubricated and come with dust-proof protection. For the UK..ZZ model, the transmission occurs by fitting keying with n6 tolerance for shaft and n6 for the seat. The UKC..ZZ model is equipped with a keyway on the inner race and should be fitted on k6 tolerance shafts. Seat fitting must be carried out with

FPD442Z Inclined Belt Conveyor Sprag One Way Clutch Bearing Features Mating parts Hardening and grinding of the mating parts is not necessary. Thoroughly clean (grease free) the mating parts in the vicinity of the freewheel clutch as well as the freewheel clutch's rings before making the press fit. Bearing The freewheel clutch includes ball and roller bearings.Additional external bearing support is not necessary. Press fit pressure Press fit pressure must not be applied to

DC5476A 16MM Thickness One Way Sprag Type Overrunning Clutch Bearings Brief Introduction of DC Sprag Clutch Bearing Type DC is a sprag type freewheel cage without inner or outer races. It must be installed in a design providing races, bearing support for axial and radial loads, lubrication and sealing. The DC type version-N accepts all types of lubricants currently used in the power transmission equipement. Surface hardness of the finished part should be HRC 60 to 62, for a

Freewheel AS NSS TSS GCr15 Sprag Clutch One Way Bearing Feature Type AS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outside dimensions are the same as series 62...Ball bearings. A typical arrangement is to install this type alongside a series 62 bearing within the same location tolerances, as shown on the following page. The inner race is

AE12 12*37*20MM One Way Roller Type Freewheel Clutch Bearing Features Type AE is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outside diameter is a standard ball bearing dimension. A typical arrangement is to install this type beside a bearing with the same housing diameter tolerance. The inner race is keyed to the shaft. The outer race has a

NF 3600RPM Freewheel 36MM One Way Sprag For Conveyor​ Features Type NF is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Standard lubrication is oil. Nominal outside diameter is a standard ball bearing dimension. A typical arrangement is to install this type alongside a bearing with the same housing tolerances, as shown on the following page. The inner

AA20 Backstop One Way Clutch Bearing Features AA is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Technical Datas SPECIFICATION Product name AA engine bearing Model AA20 Material GCr15 Inner diameter 20mm Outer diameter 68mm Thickness 34mm Torque capacity 146Nm Drag Torque 8.4Ncm Inner race overrunning speed 2000r/min Outer race overrunning speed 3600r

FP Complete Freewheel Sprag Clutch One Way Features Width:27 mm Operating temperature:max. 140°C Higher temperatures on request Lubrication oil or grease lubrication Delivered with corrosion protection. Operative grease filling on request. Installation Installation tolerances Shaft h5; hub H6 Mating parts Hardening and grinding of the mating parts is not necessary. Thoroughly clean (grease free) the mating parts in the vicinity of the freewheel clutch as well as the freewheel

AE50 50*130*63MM One Way Directional Bearing Freewheel Clutch Features Type AE is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outside diameter is a standard ball bearing dimension. A typical arrangement is to install this type beside a bearing with the same housing diameter tolerance. The inner race is keyed to the shaft. The outer race has a

CSK40 CSK40P CSK40PP CSK40-2RS One Way Clutch Bearings Fearures Item: CSK40PP-2RS Bearing Type: One-Way Clutch Bearing Bearing Inner Diameter: 40mm Bearing Outer Diameter: 80mm Bearing Width: 27mm CSK40 / CSK40P / CSK40PP Size: 40*80*22mm Types CSK and CSK...2RS are sprag type freewheels integrated into 62.. series ball bearings (except size 40). They are bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. In addition to the basic