Sprag Clutch Bearing

FE459Z Sprag Clutch Bearing Features The sprags are evenly spaced around the circumference of the insert element cage. The insert element cage does not come in contact with the inner or outer races; it remains absolutely loadfree under any application. Sprag type freewheel clutches with a plastic cage in their standard design are also available as a special design with a steel cage on request. Operating temperature: Steel cage: max. 170 Degree Plastic cage: max. 140 Degree

FGK50 GFK50 Cam Clutch 1 Way Freewheel Bearing 460Nm Sprag Clutch Features Internal Freewheels FGK are sprag freewheels with bearing support in the dimensions of the needle bearing series 59. The freewheels are supplied grease-filled for normal operating conditions and are maintenance-free. The outer ring is pressed into the customer housing. This makes compact, space-saving fitting solutions possible. GFK50 Overrunning Clutch Can be used as : 1.overrunning clutch 2.backstop

Features Type CK-A is a sprag type freewheel non-bearing supported. Nominal dia.-Direction diameter is a standard ball bearings dimension. Bearings are required to support axial and radial loads. Units are delivered grease Iubricated. The standard arrangement is to install this type besides a bearing with the same housing diameter tolerance. The inner race and the outer race are keyed to the shaft and hole. This series extensive used in machinery

Features Application: primarily used on motorcycle starter Dimensions and Capacities Type Inner race Outer race Wmin Wmin D­C Tkn Weight D +0.008 -0.005 DO ±0.013 (mm) W W1 (Kgf-m) (g) (mm) (mm) (mm) (mm) FWD331608PRB 39.627 56.294 13 11.4 45 27 70 FWD331808PRB 45.665 62.332 13.3 11.7 51 35 80 FWD332008PRB 51.71 68.377 13.3 11.7 57 45 89 FWD332211PRB 57.76 74.427 16.3 14.7 63 78 130 Type Inner race Outer race Wmin

FE453Z FE455Z FE458Z Precision Freewheels One Way Sprag Clutch Bearing for Helicopter Features Item: FE453Z One Way Clutch Bearing Type: One Way Clutch Bearing Dimensions :45mm x 53mm x 12mm/Metric Bearing Inner Diameter: 45mm Bearing Outer Diameter: 53mm Bearing Width: 12mm The sprags are evenly spaced around the circumference of the insert element cage. The insert element cage does not come in contact with the inner or outer races; it remains absolutely loadfree under any

BB25 One Way OD 52MM Sprag Cam Clutch Bearing Feature 1. BB series Cam Clutch is designed for press fit installation. 2. BB-1K-K and BB-2GD 1K-K series have a keyway on the inner race. Keyways, except size 25 are manufactured to DIN 6885. 3, BB40-1K-K and BB40-2GD 1K-K are manufactured to DIN 6885. 1. 3. BB-2K-K series has a keyway on both the inner and outer race. “-K” means keys shipped together with Cam Clutch. 4. Correct interference dimensions at the shaft and the

Fearures Types CSK..P and CSK..PP are sprag type freewheels integrated into 62.. series ball bearings (except size 40).They are bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” type seals is recommen-ded especially when the working temperature exceeds 50°C. Oil bath lubrication is also possible. In addition to the basic CSK

RSXM 1.4KG Backstop One Way Sprag Clutch Bearing Features The series RSXM completes teh small to medium backstop range, which commenced with the highly successful RSCI programme. Type RSXM is a centrifugal lift off sprag type freewheel with the inner race rotating. Only the inner race is designed for freewheeling. It is a non self-supported type.Bearings must be provided to ensure concentricity of the inner and outer races and support axial and radial loads, as shown overleaf

Feature Internal Freewheels FXN are sprag freewheels without bearing support and with sprag lift-off X. The sprag lift-off X ensures a wear-free free - wheeling operation when the inner ring rotates at high speed. The outer ring is pressed into the customer hous ing. This makes compact, space-saving fitting solutions possible. The freewheels FXN are used as: Backstops Overrunning Clutches for applications with high

Features ASNU NFS TFS is a roller type freewheel non-bearing supported. Bearing are supporte axil and radial load. Lubrication and sealing must be also provided by installation. Since ASNU NFS type one way clutch is a roller type without bearing supported, bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. The inner race is keyed to the shaft. The

GFK35 FGK 35 GCr15 4600 RPM Freewheel Sprag Cam Clutch Features GFK20 Overrunning Clutch Can be used as : 1.overrunning clutch 2.backstop clutch 3.indexing clutch Technical Datas Item GFK35 overrunning clutch Brand SUMA or OEM Precision P6 Type Sprag Type of support bearing support Bore Dia. (mm) 35 Torque (Nm) 204 Inner race overrunning speed (min-1) 4600 Outer race overrunning speed (min-1) 3200 Weight(kgs) 0.2 Dimensions and Capacities Type Size TKN1) Overrunningspeeds

​ Features Type NF is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Standard lubrication is oil. Nominal outside diameter is a standard ball bearing dimension. A typical arrangement is to install this type alongside a bearing with the same housing tolerances, as shown on the following page. The inner race is keyed to

FXN101-25/140 High Speed Overrunning Backstop Clutch Bearing for Pump Feature of FXN Backstop clutch bearing for PUMP The freewheels FXN are used as: Backstops Overrunning Clutches Internal Freewheels FXN are sprag freewheels without bearing support and with sprag lift-off X. The sprag lift-off X ensures a wear-free free - wheeling operation when the inner ring rotates at high speed. The outer ring is pressed into the customer hous ing. This makes compact, space-saving

Features Application: primarily used on motorcycle starter Dimensions and Capacities Type Inner race Outer race Wmin Wmin D­C Tkn Weight D +0.008 -0.005 DO ±0.013 (mm) W W1 (Kgf-m) (g) (mm) (mm) (mm) (mm) FWD331608PRB 39.627 56.294 13 11.4 45 27 70 FWD331808PRB 45.665 62.332 13.3 11.7 51 35 80 FWD332008PRB 51.71 68.377 13.3 11.7 57 45 89 FWD332211PRB 57.76 74.427 16.3 14.7 63 78 130 Type Inner race Outer race Wmin

Features Bearing The freewheel clutch includes ball and roller bearings.Additional external bearing support is not necessary. Press fit pressure Press fit pressure must not be applied to the balls. Clamping direction The arrow on the inner ring designates the inner ring's clamping direction. Width:34 mm Operating temperature:max. 100° C Lubrication Operative lifetime oil lubrication Installation Installation tolerances Shaft

RSXM51 One Way Sprag Freewheel Clutch Bearings Features The series RSXM completes teh small to medium backstop range, which commenced with the highly successful RSCI programme. Type RSXM is a centrifugal lift off sprag type freewheel with the inner race rotating. Only the inner race is designed for freewheeling. It is a non self-supported type.Bearings must be provided to ensure concentricity of the inner and outer races and support axial and radial loads, as shown overleaf.

Features - Grease lubrication is available where high inner race overrunning speeds are required or maintenance is difficult. - SO series clutches, grease lubricated for use on general purpose overrunning and backstopping applications. - SX series clutches, oil lubricated designed for medium to heavy indexing applications (over 150 indexes/minute). Technical Datas Product name SO300 SX300 One Way Freewheel Model SO300 SX300

Sprag lift-off X Internal Freewheels FXN are equipped with sprag lift-off X. The sprag lift-off X is used for backstops and overrunning clutches, provided that in freewheeling operation the inner ring is rotating at high speed and providing with overrunning clutches that the driving operation is conducted at low speed. In freewheeling operation, the centrifugal force F C causes the sprag to lift off from the outer track.

Features Cage Freewheels BWX are sprag freewheels to be installed between customer-supplied inner and outer rings. The freewheels BWX are used as: ➧ Backstops ➧ Overrunning Clutches ➧ Indexing Freewheels Nominal torques up to 4 900 Nm. Disengaging When the outer ring is rotating the centrifugal force causes the sprags to lift off from the inner race. This reduces wear during freewheeling operation. Engaging When the outer

FE428Z SpragType One Way Clutch Bearings 20*28*11MM Features Sprag type freewheel clutches with a plastic cage in their standard design are also available as a special design with a steel cage on request. Operating temperature: The stated temperature rating is for an injection molded cage. The maximum temperature rating is 170°C for a steel cage. Steel cage: max. 170 Degree Plastic cage: max. 140 Degree The insert element cage does not come in contact with the inner or outer