Overrunning Clutch Bearing

FXM120-50SX/H75 Sprag Lift Off Overrunning Clutch Bearing One Way Features of Overrunning Clutch Bearing Sprag lift-off X Integrated Freewheels FXM are equipped with sprag lift-off X. The sprag lift-off X is used for backstops and overrunning clutches, provided that in freewheeling operation the inner ring is rotating at high speed and providing with overrunning clutches that the driving operation is conducted at low speed. In freewheeling operation, the centrifugal force FC

Features The BS-R series offer easy lubrication maintenance. 1. Pre-insert the V-ring into the conveyor shaft in the correct direction. 2. Securely install the BS Cam Clutch onto the shaft. Apply the pressure only on the end face of the inner race when inserting the BS Cam Clutch onto the shaft. Do not hit the inner race directly with a hammer or apply pressure on the outer race. (Refer to page 13 for Installation and Usage) 3. Apply the sealant

Features Type RSCI is a centrifugal lift off sprag type freewheel with the inner race rotating. Only the inner race is designed for freewheeling. It is a non self- supported type. Bearings must be provided to ensure concentricity of the inner and outer races support axial and radial loads, as shown overleaf. Concentricity and runout limits must be observed. The RSCI type accepts all types of lubricant currently used in power transmission equipment.

Features Type NF is roller type freewheel non-bearing supported. Standard lubrication is OIL. Technical Datas Product name roller clutch bearing Model NF100 Material GCr15 Inner diameter 90-110mm Outer diameter 395mm Inner race overrunning speed 1500r/min Outer race overrunning speed 400r/min Weight 98Kg Torque Capacity 10000Nm Application Reducer, Printer machine, Texitle Machine, Belt Conveyor, Salt industry Package Wooden box, tube, pulley,

FXM85-40 High Speed Reducer Backstop Overrunning Clutch One Way Bearing Features of FXM85-40 Overrunning Clutch Bearing Application as Backstop Overrunning Clutch For application as backstop in installations with high speeds in freewheeling operation. For application as overrunning clutch in installations with low speeds in driving operation. Sprag lift-off X Integrated Freewheels FXM are equipped with sprag lift-off X. The sprag lift-off X is used for backstops and

DC5776A-N 25.4MM Thickness Sprag Overrunning Clutch One-Way Bearings Brief Introduction of DC Sprag Overrunning Clutch Type DC is a sprag type freewheel cage without inner or outer races. It must be installed in a design providing races, bearing support for axial and radial loads, lubrication and sealing. The DC type version-N accepts all types of lubricants currently used in the power transmission equipement. Dimensions and Capacities of DC Sprag Overrunning Clutch Size TKN1

Features Type AL..KEED2 is a roller type freewheel, self-contained, sealed and bearing supported, using two 160.. series bearings. Unit is delivered oil lubricated. This combination is used as overrunning clutch as shown overleaf. In this design, a standard AL freewheel is connected to a flexible coupling for in-line mounting. The KEE type is a high performance coupling used to damp torsional vibrations and to accept

Features Type CKL-B is a sprag type freewheels,self contained,sealed and bearing supported. It mainly used in occasion of high overrunning speed and lower start speed. It needs greaseor oil when used. It has same character and dimension as CKL-A. This combination is used as overrunning clutch and extensive used in mechanism of packing, traffic. and metallury.mine and so on. Technical Datas Model CKL-B35110 Torque (Nm) 580

Features Types GFR..F2F3/F3F4 are roller type freewheels, self-contained, sealed and bearing supported, using two 160.. series bearings. They use the GFR base module. Units must be oil lubricated before use if they are delivered disassembled and in any case for the F3F4 combination. These cover combinations are primarily used as backstops, as shown overleaf. The F3 cover acts as a torque arm and has an

Type Normal Torque Nm Overrunning Speed r/min Dimension mm Weight kg Inner race Outer race dH7 D k (H7) D D 1 L L 1 L 2 B b n ×t n CKL-A1252 44 2125 2100 12 12~25 52 97 90.0 35 42 13.0 2×1.0 3.0 CKL-A1568 90 1615 2100 15 15~30 68 112 110.0 40 52 18.0 3×1.4 4.4 CKL-A2075 98 1360 1960 20 15~30 75 118 114.5 40 56 14.0 3×1.4 4.6 CKL-A2590 230 1190 1610 25 20~40 90 130 127.5 50 60 17.5 4×1.8 6.4 CKL-A30100 400 1105 1470 30 20

Features Type CKL-A is a sprag type freewheels,self contained,sealed and bearing supported. Units is delivered oil lubricated. The inner race and flange are keyed to the opposite shaft. This combination is used as overrunning clutch and extensive used in mechanism of packing, traffic. and metallury.mine and so on. Dimensions and Capacities Type Normal Torque Nm Overrunning Speed r/min Dimension mm Weight kg Inner race

FB72 One Way Cam Clutch Backstop Bearing Features Complete Freewheels FB are sealed sprag freewheels with ball bearings. They are supplied oil-filled and ready for installation.The freewheels FB are used as: ➧ Backstops ➧ Overrunning Clutches ➧ Indexing Freewheels In addition to the standard type, four other types are available for extended service life and indexing accuracy. Nominal torques up to 160 000 Nm.Bores up to 300 mm. Many standard bores are available. Dimensions

Features Complete Freewheels BD … X are sealed sprag freewheels with ball bearings and sprag lift-off X. They are supplied oil-filled. The sprag lift-off X ensures wear-free freewheeling operation when the inner ring rotates at high speed. The freewheels BD … X are used as: ➧ Backstops ➧ Overrunning Clutches for applications with high speed freewheeling operation and when used as an overrunning clutch with low speed

Features The BS series Cam Clutches are intended for applications where reverse rotation of the slow speed conveyor head shaft is to be prevented (backstopping). 1. For prevention of rotation in the reverse direction at slow speeds on conveyors or pumps. 2. Before installation, verify that the direction of rotation of the inner race of the BS Cam Clutch (shown by the arrow on the inner race) is the same as the direction of

Feature Type RIZ..ESG2 is a centrifugal lift off sprag type freewheel when the inner race is overrunning. Only this race is designed for freewheeling. It is a self-contained unit designed for overrunning clutch applications. Typically used in crawl drives where the overrunning speed is high, but the drive speed is low and does not exceed the maximum driving speed specified in the table. It is a type RIZ (» see page 84 for

Features The BS-R series offer easy lubrication maintenance. 1. Pre-insert the V-ring into the conveyor shaft in the correct direction. 2. Securely install the BS Cam Clutch onto the shaft. Apply the pressure only on the end face of the inner race when inserting the BS Cam Clutch onto the shaft. Do not hit the inner race directly with a hammer or apply pressure on the outer race. (Refer to page 13 for Installation and Usage

Feature Internal Freewheels FXN are sprag freewheels without bearing support and with sprag lift-off X. The sprag lift-off X ensures a wear-free free - wheeling operation when the inner ring rotates at high speed. The outer ring is pressed into the customer hous ing. This makes compact, space-saving fitting solutions possible. The freewheels FXN are used as: Backstops Overrunning Clutches for applications with high

Features Complete Freewheels FB are sealed sprag freewheels with ball bearings. They are supplied oil-filled and ready for installation.The freewheels FB are used as: ➧ Backstops ➧ Overrunning Clutches ➧ Indexing Freewheels In addition to the standard type, four other types are available for extended service life and indexing accuracy. Nominal torques up to 160 000 Nm.Bores up to 300 mm. Many standard bores are available.

Features Type NF is roller type freewheel non-bearing supported. Standard lubrication is OIL. Technical Datas Product name roller clutch bearing Model NF40 Material GCr15 Inner diameter 60-80mm Outer diameter 245mm Inner race overrunning speed 1500r/min Outer race overrunning speed 425r/min Weight 49Kg Torque Capacity 4000Nm Application Reducer, Printer machine, Texitle Machine, Belt Conveyor, Salt industry Package Wooden

Features Type RSCI is a centrifugal lift off sprag type freewheel with the inner race rotating. Only the inner race is designed for freewheeling. It is a non self- supported type. Bearings must be provided to ensure concentricity of the inner and outer races support axial and radial loads, as shown overleaf. Concentricity and runout limits must be observed. The RSCI type accepts all types of lubricant currently used in