Ship Mooring Equipment

JIS F 2001 Type B Fabricated Double Bitts Mooring Bollard With Wide Base Plate Ship Mooring Equipment Description: JIS F2001 bollard is made for ship use according to Japanese Industrial Standard. Its appearance is free from defects such as cracks, flaw detrimental to service or rust and of good finish. Its applicable ropes are wire rope, manila and sisal fiber rope, synthetic rope for your reference. Main Technical Specification SWL Range: 29KN- 981KN. Materials: C-Mn Steel,

Marine Forged Welded Oval Eye Plate for Ship Deck Mooring and Rigging Connections Product Overview The Marine Forged Welded Oval Eye Plate is a welded ship deck attachment fitting used for fixing rope terminals, shackles, pulleys and other marine connection components. It is designed according to JIS F3410-1999 Type F and is intended for installation on reinforced ship structures where a compact welded connection point is required. The Type F design uses a forged oval eye

Polished Stainless Steel Button Chock Ship Mooring Equipment Description Polished stainless steel button chock ship is mooring equipment which is made from SUS304 or 316. The surface of the button chock is polished smooth and free from burs which may cut the mooring rope. All the radius and section changing area is smoothly curved for better performance to avoid stress concentration. Casting steel has been heat treated before delivery with good mechanical property and surface

13-32mm Steel Wire Rope Reel with Removable Handle | Manual Wire Rope Storage on Ship Deck Product Overview Type A steel wire rope reel is designed for marine steel wire rope storage where manual operation convenience is required. The removable handle can be detached after use and can be operated from either the left or right side according to deck arrangement. Compared with no-handle reels, Type A is more suitable for frequent manual winding and unwinding because the handle

50–120mm Watertight Dog Type Cable Clench | Anchor Chain Release Device for Ship Mooring Product Overview CB/T 3143 watertight dog type cable clench is designed as a critical safety component for anchor chain release systems. It is suitable for Grade 2 and Grade 3 anchor chains with diameters from 50 mm to 120 mm. Equipped with O-ring sealing structure, it ensures watertight integrity of the chain locker under tested pressure conditions. The device enables controlled holding

JIS F 3410 Type C Rope Steel Plate Eye Plates Ship Mooring Equipment Description: As an eye plate for ships that can be used when fixing structures such as rope terminals, shackles, pulleys, etc. Main Technical Specification: 1.Standard: JIS F3410-1999, 2.Nominal Sizes: 0.5-10mm 3.Type: Type C, 4.Permissible Load: 4.9 to 98KN 5.Material: Mild Steel, Stainless Steel C-Mn Steel Forging; 6.The surface of the finished eyeplate is free from visible cracks and flaking. 7.Surface

NS 2585 Open Type Casting Steel Roller Button Ship Mooring Roller Fairlead Ship Mooring Equipment Description: NS2585 fairlead roller is one kind of marine rollers for fairlead. It is used to lead the direction of mooring ropes for marine ships. NS2585 fairlead roller has high breaking load of tight wire. Compact structure, smooth surface, standard production and stable performance are the features of marine fairlead roller. Main Techncial Specification: Type: Open type

GB/T 3844 Roller Bar Type Anchor Chain Stopper Ship Mooring Equipment Description Chain stopper is to fix the anchor chain & anchor in position even in heavy sea conditions. It alwaysreduce the pull load suffered by windlass. It is designed based on the standard chain stopper strength 80% of anchor chain's minimum breaking load. NDE test is applicable to all of chain stopper we produced.GB/T 3844 anchor chain stopper is applicable to the chain size between 44mm to 132mm. For

13–32mm Marine Steel Wire Rope Reel | JIS Standard Wire Rope Storage for Ship Deck Product Overview Marine steel wire rope reel is designed for safe storage, handling and management of wire ropes on ship decks. Based on JIS F 3430-1980 standard, this reel is widely used for storing mooring wires, towing wires and auxiliary steel cables. Compared with drum winches, the reel provides a simple, low-maintenance solution focused on storage rather than load bearing. Lightweight

20–200T Single Bitt Dock Bollard | Casting Steel & Ductile Iron Marine Mooring Equipment Product Overview The single bitt dock bollard is a heavy-duty marine mooring fitting designed for secure vessel berthing at ports, shipyards, and offshore structures. Manufactured from high-quality cast steel or ductile iron, it provides reliable performance under dynamic load conditions. Ductile iron offers superior wear resistance, while cast steel ensures high structural strength. All

100–320mm Four Roller Universal Fairlead | CB/T 3062 Type B Multi-Directional Mooring Fairlead for Ship Deck Product Overview CB/T 3062 Type B four roller universal fairlead is designed for multi-directional mooring rope guiding on ship decks. The structure consists of two vertical and two horizontal rollers, allowing rope guidance from four directions with improved load distribution. It is suitable for complex mooring conditions where rope direction varies, providing reduced

27.6–44mm Manual Bond Cable Reel CB*875-78 for Ship Grounding Cable Storage Product Overview CB*875-78 manual operated bond cable reel is designed for safe storage and handling of ship grounding cables. Ensures reliable grounding connection between ship and shore, improving electrical safety during operation. It ensures organized cable storage, protects cables from damage, and allows controlled manual winding and unwinding. Quick Specifications Cable Diameter: 12.7–44 mm →

13–56mm Steel Wire Rope Storage Reel with Brake | CB/T 3468-92 Type B for Ship Deck Product Overview CB/T 3468-92 Type B steel wire rope storage reel is designed for safe storage and management of marine steel wire ropes. Equipped with manual brake, worm gear reducer and hand wheel operation, it allows controlled winding and unwinding of wire rope. The drum diameter is designed according to wire rope diameter to reduce bending stress and extend rope service life. Suitable for

Casting Steel Large Double Bitt Bollard ASTM A27-70-36 Ship Mooring Equipment Description Casting steel large double bitt bollard is made of material ASTM A27-70-36 or equivalent and has 12” and 14” with or without horns. Additional stiffeners being added in the middle of base which provide higher safe working load and better strength. The surface of the single bitt bollard is smooth and free from burs which may cut the mooring rope. All the radius and section changing area

Casting Steel Double Bitt Bollard ASTM A27-70-36 Ship Mooring Equipment Description Casting steel double bitt bollard is made of material ASTM A27-70-36 or equivalent and has 8” and 10” with or without horns. The surface of the single bitt bollard is smooth and free from burs which may cut the mooring rope. Casting steel has been heat treated before delivery with good mechanical property and surface quality. Dye penetration test or Magmatic examination will be carried out as

24–48 Inch Cast Steel Kevel Chocks | ASTM A27 Mooring Rope Guide for Ship Deck Product Overview Cast steel kevel chocks are deck-mounted mooring fittings used to guide and secure mooring lines. Manufactured from ASTM A27-70-36 cast steel, the structure is verified by finite element strength analysis and load testing. The design minimizes rope bending stress and extends service life of synthetic mooring lines. Surface is smoothly ground to protect ropes and ensure safe

Casting Steel Bolt Anchorage Staghorn Dock Bollard Ship Mooring Equipment Description: We are mooring equipment maker. We produce all range of mooring bollard. There are various types. They are different in shapes, load ratings and materials. Staghorn bollard is staghorn shaped type dock bollard. It is commonly used to guarante the security of marine vessels by mooring ropes. We also supply other shapes of dock bollards for your choice: T-head bolllard, kidney bollard, single

150–350mm Cross Bitt Bollards | Cruciform Mooring Bollards for Ship Deck Product Overview Cross bitt bollards are deck mooring fittings used to secure mooring lines on ships. Single cross bitt cruciform bollards are designed and manufactured in accordance with GB10106-88, providing reliable mooring points for both steel wire and synthetic fiber ropes. They provide strong and stable mooring points for both steel wire ropes and synthetic fiber ropes in marine environments.

DIN 81906 Casting Steel Mooring Warping Roller Ship Mooring Equipment Description: DIN 81906 warping roller strictly complies with German production standard DIN 81906-1999.It can be used together with conical pedestal (DIN 81907); Besides, this roller has high abrasion resistance. If you are interested in our fairlead rollers or other marine equipment, please contact us right now without any hesitation. Main Technical Specification: 1. Technical Standard: DIN81906-1999 2.

JIS F 2015 Cast Steel Bar Type Ship Anchor Chain Stopper Ship Mooring Equipment Description: JIS F 2015 cast steel bar type ship anchor chain stopper is casting steel anchor chain stopper. It is bar type, without roller. It is to be fitted on fabricated foundation to adjust the height for alignment between chain hawse pipe and windlass. Normally there is one chain wheel or roller in front to lift the chain smoothly. Main Technical Specification; Technical Standard: JIS F2015