Technical Ceramic Parts

Beryllium Oxide (BeO) parts Beryllium oxide [BeO] has a unique combination of thermal, electrical, optical and mechanical properties that are used for a wide range of applications: from thermal control systems and integrated electronics to high-temperature refractory components and nuclear reactors. Beryllium oxide has no analogues among oxide-ceramic materials in terms of thermal conductivity. BeO-based ceramics have a thermal conductivity exceeding that of many metals,

Coatings Depending on further manipulations with metallized elements, there is often a need to apply a finishing coating. The finishing coating can perform different functions: it can be a protective coating against various influences (mechanical, exposure to humidity, etc.); be a barrier (the interface between two mutually diffusing metals); act as a coating for soldering or welding. Regardless of the chosen technology, our technologists will help you choose the finishing

AMB Technology (Active Metal Braze) AMB (Active Metal Braze) is one of the technologies that are used in the world to create boards with thick metallization (from 127 microns). It is in the AMB technology that a solution has been found to the problem of the mismatch of the KTR of copper with a ceramic substrate, which is key in the case of DBC technology. The coordination of the KTR is achieved due to the formation of a matching layer between the conductive layer of copper

Thin-Film Technology The manufacture of boards using thin-film technology has today become very widespread in the production of micro- and nanoelectronics. With thin-film technology, an adhesive and basic functional layer is deposited on the ceramic base. Deposition of layers can be performed by PVD (Physical Vapor Deposition), CVD (Chemical Vapor Deposition) or ALD (Atomic Layer Deposition) methods. The most commonly used PVD methods of deposition of thin films, as the

DPC technology (Direct Plated Copper) Stapes of the technological process: 1. Formation of a thin continuous film of conductive material on a ceramic substrate. In this case, there may be holes in the substrate; 2. Applying a photoresist to the formed conductive layer; 3. Exposure and manifestation of photoresist; 4. Galvanic build-up of copper metallization of the required thickness; 5. Application of Ni-Au finish coating; 6. Removing the photoresist from the surface of the

Microwave Ceramic Substrates (With High Dielectric Constant) Ceramics with high dielectric permittivity include microwave ceramics, high-frequency ceramics (HF ceramics) and ultrahigh-frequency ceramics (microwave ceramics), as well as plates made of ferro-ceramic materials. Microwave ceramics is a class of materials with a dielectric constant E from 6 to 10000 and has a small tangent of the dielectric loss angle, high insulation resistance and electrical strength, high

Beryllium Oxide Ceramic Substrates (BeO) Beryllium oxide [BeO] has a unique combination of thermal, electrical, optical and mechanical properties that are used for a wide range of applications: from thermal control systems and integrated electronics to high-temperature refractory components and nuclear reactors. Beryllium oxide has no analogues among oxide-ceramic materials in terms of thermal conductivity. BeO-based ceramics have a thermal conductivity exceeding that of many

Excellent Non-Stick Properties Robotic Welding Nozzles Pearling of the welding spatter ensures safe processes of the highest quality. Main applications: Components for semiconductor equipment Plates, Wafer, Rings, Gas distribution plates, Nozzles Top nozzles or Baffles, Pedestal heaters, Cover plates RF windows, Crucibles Substrate Heat resistant base materials Key Features & Specifications: Utilizes hot pressing technology Up to diameter of 650mm Very low porosity High

Ceramic Electronic Components Ceramic inserts and tools ground with high precision ensure unobstructed assembly of even the smallest electronic components, both in fully automated production and for manual assembly. Electrical insulation, high wear-resistance, temperature-resistance The two most commonly used ceramic materials are 95% alumina and 9% alumina: (1)95% alumina:Because ofits excellent performance,95% aluminais widely used in grinding and polishing processes, as

Alumina ceramic Alumina ceramic is akind of ceramic material with alumina(Al2o3)as the main body,which has the characteristics of high hardness,high strength,high wear resistance,high corrosion resistance,high temperature resistance and strong insulation. The two most commonly used ceramic materials are 95% alumina and 9% alumina: (1)95% alumina:Because ofits excellent performance,95% aluminais widely used in grinding and polishing processes, as wel as in the chemical and

FZTA (48 series) We can precisely process structural products according to customers' needs,which has the advantages of high temperature resistance,corrosion resistanceand high wear resistance,and can be used stably in complex working conditions. Detection Indicator PR-ZR(Yellow zirconium) Ingredient Zirconia Content 94.5±0.5 physical property Density (g/cm²) ≥6.0 water absorption (%)

A-ZR(3Y series) We can precisely process structural products according to customers' needs,which has the advantages of high temperature resistance,corrosion resistanceand high wear resistance,and can be used stably in complex working conditions. Detection Indicator A-ZR(Y8 series) Ingredient Zirconia Content 94.5±0.5 physical property Density (g/cm²) ≥6.0 water absorption (%)

A-ZR(Y8 series) We can precisely process structural products according to customers' needs,which has the advantages of high temperature resistance,corrosion resistanceand high wear resistance,and can be used stably in complex working conditions. Detection Indicator A-ZR(Y8 series) Ingredient Zirconia Content 89±0.5 physical property Density (g/cm²) ≥5.9 water absorption (%)

ZR95nm Zirconia Beads and ZR95 Highpurity Zirconia Beads ZR95nm Zirconia Beads Features ◆ Using a unique extrusion molding process, the bead is uniform and dense; ◆ It is made of hydrothermal nano raw materials,low temperature sintering method, smooth surface,excellent wear resistance; ◆Three-stage selection and secondary screening treatment are adopted to ensure the sphericity and beadssize distribution; ◆Ultra-high-speedpre-grinding treatmentisadoptedtoensurethatthereareno

All Kinds of Ceramics Parts Alumina ceramic is a kind of ceramic material with alumina(Al2o3)as the main body,which has the characteristics of high hardness,high strength,high wear resistance,high corrosion resistance,high temperature resistance and strong insulation. The two most commonly used ceramic materials are 95% alumina and 9% alumina: (1)95% alumina:Because ofits excellent performance,95% aluminais widely used in grinding and polishing processes, as wel as in the

Cermaic Terminal Block High temperature resistant ceramic terminal block is used to connect wires and cables,which has excellent insulation performance and high temperature resistance. According to the structure,it can be divided into:Internal (BType),External(E type) and so on. Ceramic materials: steatite ceramic and 95% alumina ceramic. Metal parts material:brass,copper-nickel plating,stainless steel sheet.

Ceramic Band Heater Material: Steatite Ceramic (white or beige) or 95% alumina ceramic (pink) Main types:(1-8 holes) Aperture:5mm,5.5mm,6mm,etc Grooves: grooveless -A type and grooved (upper groove-B type, lower groove -C type) Product application: due to the use of steatite and pass design,it can meet the requirements of high temperature resistance and cross heating wire of heating ring components.Steatite ceramics have good insulation,heat resistance and low cost.95%

Cordierite Ceramic Bobbin Heater The bobbin heater made from cordierite ceramic,has good chemical stability,electrical insulation and cold and heat resistance.Combined with niclel-chromium alloy wire heating elements forms an efficient heating device,specifically designed for the heating process of liquids or semi-solid materials.With its simple installation process,easy maintenance and repair,and excellent energy efficiency,the bobbin heater has became the ideal choice for

Cordierite Ceramic Parts Cordierite ceramic is an extremely light material with small thermal expansion and excellent strength, hardness and thermal shock resistance. Cordierite ceramic has the characteristics of low thermal expansion,high mechanical strength, high rigidity,long-term dimensional stability and radiation resistance,and can be applied to space optical communication.At the sametime, cordierite ceramics have the characteristics of low density,low thermal

Air Float Linear Scale Focused on the research and manufacturing of ultra-precision ceramic structural components A national high-tech enterprise With ceramic air-floating guide rail systems as the core Committed to providing ultra-precision motion control solutions for the precision manufacturing field Supplier of core components for precision testing equipment Ceramic guide rails Ceramic measuring tools Squares, rulers, angle gauges, air-floating linear scales Precision air