Tilt Sensor Inclinometer

HDA446T DIGITAL OUTPUT DYNAMIC TILT SENSOR.pdf PRODUCT DESCRIPTION HDA446T A new generation of digital MEMS dynamic tilt sensor. It can measure the attitude parameters (roll, pitch, and azimuth) of a moving carrier, and suitable for tilt angle measurement under motion or vibration. HDA446T has a built-in high-precision acceleration and gyro sensor, and integrates the Kalman filter algorithm, which can measure the real-time motion data of the carrier under motion or vibration.

PRODUCT MCA418T MCA428T CURRENT OUTPUT TYPE TILT SENSOR.pdf PRODUCT DESCRIPTION The MCA418T/428T Series Tilt Sensors are a new low-cost, full-attitude tilt angle measurement solution. Featuring a cutting-edgeanti-interference platform design, they incorporate a novel MEMS(Micro-Electro-Mechanical Systems) sensing unit, deliver robustperformance across a wide temperature range, and exhibitexceptional vibration resistance. With long-term stability andreliability, these sensors

GENERAL DESCRIPTION GIM140R-V2 series tilt sensor is a new low cost tilt angle measurement product developed independently by RION. It adopts the latest anti_interference platform design and integrates a new micro_mechanical sensing unit. It has wide working temperature, excellent anti_vibration and long_term stable and reliable performance.This product adopts the non_contact principle to measure the tilt angle. The internal capacitive micromechanical unit measures the

SDA110T SDA120T VOLTAGE OUTPUT INCLINOMETER.pdf DESCRIPTION SDA110T 120T is a voltage output tilt sensor, which can output the tilt of two directions axis at the same time. The user only needs to collect the voltage value of the sensor to calculate the tilt of the current object. The built-in (MEMS) micro-solid swing is measured by the change of static gravity field, converted into the change of inclination, and then output by voltage (0-5V). It is mainly used to measure the

PDA826FL Dual axis tilt angle sensor.pdf PRODUCT DESCRIPTION PDA826FL is a high-performance product developed specifically for dynamic tilt angle measurement of wind turbine tower shaking. It has good low-frequency characteristics and can effectively capture slowly changing tilt signals, meeting the precise measurement needs in low-frequency dynamic scenarios. All products undergo full temperature range calibration compensation and long-term stability testing before leaving

PSI-25M Dual Reverse Output Pressure Sensor, Anti Interference Low Drift PSI-25M Pressure Sensor.pdf Product introduction: The PSI-25M is a high-performance sensor designed for measuring pressure in liquids and gases, specifically used in construction machinery, industrial equipment, shipbuilding, and other industries that require reliable pressure monitoring. Key Features: Pressure Range: 0-25MPa Construction: 304 stainless steel housing, laser-welded for exceptional

SCA118T SCA128T CURRENT TYPE INCLINOMETER.pdf INTRODUCTION SCA118T/SCA128T is a standard industrial output type single/dual axis inclinometer with a standard current output of 4-20mA, which can transmit up to 2000 meters over long distances. The output signal has strong anti-interference and is professionally applied to construction machinery equipment working in harsh environments. The product is produced using the latest MEMS sensor production process, and the temperature

PSI-25M Temperature Compensated Pressure Measure Device Low Temp Drift PSI-25M Pressure Sensor.pdf Product Size: Product introduction: range 0~250Bar Precision ±0.5%FS(@25℃) ±1%FS(@-20~60℃) ±2%FS(@-40~20℃ @60~85℃) Output 1 4~20mA Output2 20~4mA Supply voltage 9~32Vdc Compensated temp. -20~60℃ Operating temp. -40~85℃ Size Ø24.5*H60.5mm Weight ≤80g(cable not included) The PSI-25M is designed for accurate pressure measurement of liquids and gases in construction machinery,

LCA318T LCA328T CURRENT TYP INCLINOMETER.pdf PRODUCT DESCRIPTION LCA318T / LCA328T series tilt angle is a small-volume MEMS uniaxial tilt sensor developed by RION. The output current is internally quadratic linearity corrected. It is a linearity current output tilt angle sensor. It is mainly aimed at applications where volume and cost are highly restrictive. Due to the built-in inclination unit of the latest micro-electromechanical production process, the product is small,

LCA316T LCA326T CANBUS TILT SENSOR.pdf PRODUCT INTRODUCTION LCA316T/LCA326T series products are a new generation of digital small volume MEMS tilt sensor launched by RION Technology. It has a built-in dual-channel earth gravity tilt unit, which can be converted into tilt angle changes by measuring static gravity acceleration. So that the tilt angle of the sensor output relative to the horizontal plane can be measured. Output method CAN2.0A/B. Because it is a built-in MCU

LCA310T LCA320T VOLTAGE TYPE INCLINOMETER.pdf ▶ INTRODUCTION LCA310T/LCA320T is a small-volume low-cost single-axis tilt sensor developed by RION technology. The output voltage is internally quadratic linearity corrected. It is a linearity voltage output tilt sensor. It is mainly aimed at applications where volume and cost are highly restrictive. Due to the built-in tilting unit of the latest technology micro-electromechanical production process, the volume is small, the

HCA716 HCA726-CANBUS TILT SENSOR.pdf PRODUCT DESCRIPTION HCA716S / HCA726S is a small volume high-precision single / dualaxis inclinometer developed by RION Technology for industrial field control. It adopts CAN2.0A/B serial access interface. Built-in high-precision 24bit A / D differential converter, through the 5th order filtering algorithm, can measure the tilt and pitch angle of the sensor output relative to the horizontal plane. The product integrates the latest

HCA518T HCA528T-N HIGH PRECISION CURRENTY TYPE INCLINOMETER.pdf GENERAL DESCRIPTION HCA518T/HCA528T-N is a high accuracy single /dual axis tilt sensor,output adopt the standard industry electronic interface 4 ~20mA,can be long-distance transmission of up to 2000 meters.The product uses the latest MEMS high technology for production ,made precise compensation and correction to temperature error and nonlinearity error,small measuring range and the highest accurate up to 0.003 °

FCA716 FCA726 HIGH ACCURACY INCLINOMETER.pdf GENERAL DESCRIPTION FCA716/FCA726 is a small volume high-precision single /dual-axis inclinometer developed by RION Technology for industrial field control.It adopts RS485 /RS232 serial access interface. Built-in high-precision 24bit A /D differential converter,through the 5th order filtering algorithm ,can measure the tilt and pitch angle of the sensor output relative to the horizontal plane.The product integrates the latest

MCA416T MCA426T DIGITAL OUTPUT TYPE TILT SENSOR.pdf MCA416/426T series tilt sensor is a new type of low-cost full-attitude tilt angle measurement product. It adopts the latest anti-interference platform design, integrates new micro-mechanical sensing units, has wide temperature working performance , superior anti-vibration performance, long-term stable and reliable operation, and effective working life of up to 10 years. The product adopts a non-contact principle to measure

SDA118T&SDA128T CURRENT OUTPUT INCLINOMETER.pdf DESCRIPTION SDA118T/SDA128T is an industrial grade current output inclinometer with high seismic performance, ensuring accurate measurement of objects; Standard current output of 4-20mA, with dual axis tilt, capable of long-distance transmission up to 2000 meters. The output signal has strong anti-interference ability and is specifically applied to engineering machinery equipment working in harsh environments. The product is

LCA318T LCA328T CURRENT TYP INCLINOMETER.pdf LCA318T LCA328T CURRENT TYP INCLINOMETER.pdf PRODUCT DESCRIPTION LCA318T / LCA328T series tilt angle is a small-volume MEMS uniaxial tilt sensor developed by RION. The output current is internally quadratic linearity corrected. It is a linearity current output tilt angle sensor. It is mainly aimed at applications where volume and cost are highly restrictive. Due to the built-in inclination unit of the latest micro-electromechanical

ACA610T ACA620T-N HIGH ACCURACY VOLTAGE TILT SENSOR.pdf GENERAL DESCRIPTION ACA610T/ACA620T-N is a single/dual axis inclinometer with full temperature compensation analog voltage output. The product uses a high-precision 24 bit A/D differential converter internally to ensure the linearity of the output voltage signal. Users do not need to make linearity corrections later on, and it is ready to use, stable and reliable. ACA610T/ACA620T-N has a competitive advantage among

HCA716 HCA726 CANopen TILT SENSOR.pdf PRODUCT DESCRIPTION HCA716S/HCA726S is a small-sized single/dual axis tilt sensor designed for industrial field control, using CANopen communication interface. Built in high-precision 24 bit A/D differential converter, using a 5th order filtering algorithm, can measure the tilt and pitch angles of the sensor output relative to the horizontal plane. This product integrates high-tech MEMS tilt unit, with a measurement range of ± 180 degrees

SCA110 SCA120T VOLTAGE TYPE INCLINOMETER.pdf ▶ INTRODUCTION SCA110T/SCA120T is one tilt sensor with analog voltage output. Users only need to collect the voltage value of the sensor to calculate the current inclination of the object. The built-in (MEMS) micro-solid pendulum is used to measure the change of the static gravity field and convert it into the change of the inclination angle. The change is output through the voltage (0-5V); it is mainly used to measure the