EV Connector Testing Equipment

IEC 62196-3 Electric Vehicle Connectors Temperature Rise Test Equipment Product information: It is suitable for detecting the temperature rise test after the charging pile interface plug and socket pass the rated current, and assessing the heating of the surface of the electrical accessories when the load current is connected, and whether the temperature rise of the terminal meets the requirements of the standard. Compliance Standards: This temperature rise test system meets

IEC62196-1 EV Connectors Cable Anchorage Pull Force And Torque Test Equipment Product Information This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. Compliance Standards It is designed and manufactured according to IEC62196-1: 2022 clause 25.3 Figure 17 and table 11, IEC60309-1: 2012 clause 23.3, etc. Principle and Structure Pull is realized by single-phase speed

Vehicle Run-Over Resistance Test Equipment for Plugs & Connectors IEC 62196-1 Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. Compliance Standards: Conforms to IEC 62196-1: 2022 clause 33, UL 2594:2016 clause 58. Technical parameters: Test

IEC 62196-3 EV Charging And Industrial Coupler Durability Test Equipment Product information: Standard: This test equipment meets the requirements of IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. It is used to verify whether electrical accessories such as electric vehicle charging interfaces, industrial plugs, socket-outlets and couplers can withstand the mechanical, electrical and thermal stresses

EV Connector Testing Equipment Specialized apparatus for simulating operational offset forces and testing compressive strength of EV connectors during charging interface misalignment scenarios. Compliance Standards This test equipment conforms to UL2552-2022, clause 54C.3 and Figure 54C.2, IEC62196-1. Equipment Overview Samples and Restrictions: Charging interface Application: Applies up, down, left, and right forces to the gripping point of the charging gun to simulate

EV Connector Testing Equipment for Airtightness Testing and Automatic Evaluation This high-precision EV Connector Testing Equipment provides comprehensive airtightness testing and automatic evaluation for electric vehicle charging components. Designed specifically for EV charging gun components and water pipes, it performs rigorous pressure-drop tests based on IPX7 standards to ensure product reliability and identify defective materials before assembly. The system delivers

Electric Vehicle Charging Connector Withdrawal Test Equipment IEC 62196-1 This specialized test equipment measures the withdrawal force required when disconnecting test plugs from electric vehicle charging sockets and latching devices, ensuring compliance with international safety standards. Compliance Standards Conforms to IEC 62196-1:2022 clause 14.1.5, 14.1.6, fig13, fig14 Equipment Overview Designed to verify the withdrawal force when test plugs are removed from socket

EV Connector Testing Equipment for Mechanical Strength and Flexibility This specialized testing equipment evaluates the mechanical strength and flexibility of electric vehicle charging connectors, plugs, sockets, and couplers according to international standards. Compliance Standards Conforms to IEC 62196-1:2014 clause 7.11 and clause 7.15, IEC 60309-1:2012 clause 24.4. Product Overview The EV Plug Flexibility Testing Machine is engineered to assess the mechanical durability

Electric Vehicle Connectors Temperature Rise Test System 100A IEC 62196-1 Complied Standards & Clauses This temperature rise test system meets the standard requirements of IEC 62196-3: 2022 clause 24, IEC 62196-1: 2022 clause 24, clause 34.2, 34.4 and 35.4, IEC 60309-1: 2012 clause 22, etc. Product Overview The temperature rise test system consists of an electric voltage regulator, a current transducer, a PLC programmable controller, a current sensor, a humanized touch screen

AC Charging Gun Comprehensive Test System EV Connector Testing Machine This test system is mainly used for functional inspection of AC plugs according to Chinese (GB), European (EU), and American (UL) standards. Each plug can be assigned a unique QR code, and the test results are automatically saved in reports. Qualified results can be printed directly. All functions are tested automatically in a single run, providing high efficiency and labor savings, making it suitable for

EV Charging Gun Test System Automatic EV Connector Functional Testing This advanced AC/DC Electric Vehicle Charging Gun Test Equipment provides comprehensive functionality testing for charging guns compliant with Chinese, European, and American standards. Each unit is assigned a unique QR code for complete traceability, with automated test result documentation and pass/fail reporting capabilities. Engineered for manufacturing efficiency with minimal operator intervention,

EV Connector Testing Equipment Providing Airtightness Testing and Automatic Evaluation for Electric Vehicle Charging Components The Electric Vehicle Charging Connector & Water Pipe Air Tightness Tester is a high-precision leak detection solution designed for EV charging gun components and water pipes. It performs airtightness and pressure-drop tests based on IPX7 standards to ensure product reliability and identify defective incoming materials before assembly. This tester

Electric Vehicle Charging Connector Flexing Test Equipment Bending & Flexing Test System This specialized testing system evaluates the mechanical strength and durability of electric vehicle charging connectors, industrial plugs, sockets, and couplers through comprehensive flexing performance analysis. Compliance Standards Conforms to IEC62196-1:2014 clause 7.11 and clause 7.15 Complies with IEC60309-1:2012 clause 24.4 Product Overview The EV Plug Flexibility Testing Machine

Automotive Connector Flexing Test Machine EV Plug and Coupler Flexing Tester Complied Standards & Clauses IEC62196-1: 2014 “Plug, socket-outlets, vehicle connectors and vehicle inlets–Conductive charging of electric vehicle-Part1: General requirements” clause 26.4, figure 14 IEC60309-1: 2012 “Plug, socket-outlets and couplers for industrial purposes–Part1: General requirements” clause 24.4, figure 9 Equipment Structure This Mechanical Load Flexing Test Equipment is designed

EV Connector Marking Endurance Tester Label and Marking Abrasion Tester Complied Standards & Clauses This label marking abrasion test apparatus conforms to IEC 62196-1:2022 clause 8.7, figure 8. Product Overview This Marking Endurance Test Equipment is designed to precisely evaluate the durability and legibility of product markings under mechanical wiping and chemical exposure conditions. It faithfully simulates real-world wear by performing controlled rubbing tests using

EV Charging Connector Bending Test Charging Interface Mechanical Endurance Tester Complied Standards & Clauses IEC 62196-1:2014 "Plug,socket-outlets,vehicle couplers and vehicle inlets–Conductive charging of electric vehicle-Part1:Charging of electric vehicles up to 250A a.c and 400A d.c" clause 7.11 and clause 7.15 IEC 60309-1:2012 "Plug,socket-outlets and couplers for industrial purposes–Part1:General requirement" clause 24.4 Equipment Overview Engineered for uncompromi

EV Charging Connector Bending Test Charging Interface Mechanical Endurance Tester Complied Standards & Clauses IEC 62196-1:2014 "Plug,socket-outlets,vehicle couplers and vehicle inlets–Conductive charging of electric vehicle-Part1:Charging of electric vehicles up to 250A a.c and 400A d.c" clause 7.11 and clause 7.15 IEC 60309-1:2012 "Plug,socket-outlets and couplers for industrial purposes–Part1:General requirement" clause 24.4 Equipment Overview This Bending Mechanical

Air pressure test equipment for EV Charging Connector Air Tightness Tester Product Overview The Electric Vehicle Charging Connector & Water Pipe Air Tightness Tester is a high-precision leak detection system engineered for manufacturers who demand reliable quality control of EV charging gun components. Designed according to IPX7 pressure-drop testing standards, this advanced tester ensures that every connector or water-pipe assembly meets strict airtightness requirements

Electric Vehicle Charging Connector & Water Pipe Air Tightness Tester Product Overview The Electric Vehicle Charging Connector & Water Pipe Air Tightness Tester is a high-precision leak detection solution designed for EV charging gun components and water pipes. It performs airtightness and pressure-drop tests based on IPX7 standards to ensure product reliability and identify defective incoming materials before assembly. This tester provides stable pressure output, micro

Electric Vehicle EV Charging Gun Plug-in/Plug-out Force Test Equipment Equipment Overview The Charging Gun Insertion & Withdrawal Force Tester is a high-precision tool specifically engineered for evaluating the plug-in and pull-out forces of EV charging connectors. Built for manufacturers who demand accuracy, stability, and efficiency, this system ensures every charging gun meets strict mechanical performance and safety requirements before entering the market. Powered by a