EV Connector Testing Equipment

EV Connector Testing Equipment Standard Test Probe B IEC 62196 Complied Standards & Clauses Conforms to IEC 62196-1:2022 clause 10.1. IEC 62196-1:2022 clause 10.1. Equipment Overview This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe consists of dito,finger,base and insulated handle which simulates the characteristics of the human hand. It has

IEC 62196 Dual station Label Marking Abrasion Test Apparatus Complied Standards & Clauses This label marking abrasion test apparatus conforms to IEC 62196-1:2022 clause 8.7, figure 8. Product Overview It is utilized to assess the endurance of the marking. The examination is conducted by wiping the marking for 15 seconds with a cotton cloth moistened with water, followed by another 15 seconds with a cotton cloth soaked in 95% n-hexane (Chemical Abstracts Service Registry

EV Charging Gun Connector Withdrawal Force Test Equipment IEC 62196-1 Equipment Overview The force of inserting the charging gun into the socket: vertically downward the charging gun, place the main weight required by the standard on the charging gun, and then use a 0.8kg weight to fall freely from a height of 5cm to impact the main weight. The charging gun should be inserted into the socket to the position required by the contact. This withdrawal force test apparatus is

IEC 62916-3 EV Plug and Socket Temperature Rising Test Equipment Complied Standards & Clauses It is designed and manufactured according to IEC 61851-1:2017 clause 11.6. Equipment Overview The system uses self-programmed software controlled by a computer. All standard test procedures and data judgments are controlled by the system, making operation easy. It is used to assess the surface heating and electrode temperature rise of charging interfaces and electrical accessories

Electric vehicle Plug Mechanical Lock Endurance Test Equipment IEC62196-1 Complied Standards & Clauses This test equipment meets the requirements of IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. Equipment Overview The servo motor drive mechanism is used to perform linear plug-and-pull repetitive actions on the sample, and an external load can be connected for on-off testing. Power on and off time,

Electric vehicle charging station Cable Anchorage Pull Force and Torque Test Apparatus Complied Standards & Clauses It is designed and manufactured according to IEC 61851-1:2017 clause 11.6. Equipment Overview The weight is used to apply tension, and the weight and the torque arm realize torque. The PLC is used to control the number of tensions and the torque test time. When the number of tests or the test time is reached, the equipment automatically stops. After the test,

IEC 62916-2 Short-time Test Current and Temperature Rising Test System Complied Standards & Clauses This test system meets the standard requirements of IEC 62196-1Ed.4CDV 2020 clause 12.3, clause 24, table 10, clause 34.2, 34.4 and 35.4., IEC 62916-2, IEC 62916-3, etc. Product Overview It is suitable for detecting the temperature rise test after the EV plug and socket pass the rated current, and assessing the heating of the surface of the electrical accessories when the load

EV Plug Electronic Lock Test Machine Connector Testing Equipment Equipment Overview The test machine is used to test whether electrical accessories with electronic locking devices such as electric vehicle charging interfaces, industrial plugs and sockets, and couplers can withstand the mechanical stress, electrical stress, and thermal stress that occur during normal use without excessive wear or other harmful effects. The purpose is to verify its reliability. The servo motor

EV Plug Mechanical Lock Endurance Test Machine for Electrical Accessories Complied Standards & Clauses This test equipment meets the requirements of IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. Equipment Overview It is used to verify whether electrical accessories such as electric vehicle charging interfaces, industrial plugs, socket-outlets and couplers can withstand the mechanical, electrical

IEC 61851 Cable Anchorage Pull Force and Torque Test Apparatus Complied Standards & Clauses It is designed and manufactured according to IEC 61851-1:2017 clause 11.6. Equipment Overview Samples and restrictions: Electric vehicle charging station. Test purpose: Used to test the ability of electric vehicle charging station connection cable accessories to withstand specified tension and torque. Test Principle: The pulling force is realized by using a motor to drive an eccentric

IEC 62752 EV Charging Interface Drive Over Testing Machine for Plug Vehicle Connector Complied Standards & Clauses Conforms to IEC 62196-1: 2022 clause 33, IEC 62752:2016 clause 9.34, etc. Product Overview The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is

UL2594 Cable Tension and Torque Test Device for Vehicle Plug and Socket Complied Standards & Clauses Conforms to UL2594 clause 55.4, IEC62196-1:2014 clause 25.3 and figure 17 and table 11, IEC60309-1:2012 clause 23.3, etc. Product Overview It is used to test the ability of charging vehicle plug and socket, and connection cable accessories to withstand specified pulling force and torque. The pulling force is realized by using a single-phase speed-regulating motor to drive the

IEC60309 EV Plug Withdrawal and Insertion with Solution Dip Test Machine Complied Standards & Clauses Conforms to IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. Product Overview It is used to verify whether electrical accessories such as electric vehicle charging interfaces, industrial plugs, socket-outlets and couplers can withstand the mechanical, electrical and thermal stresses that occurred

Electric Vehicle Insertion Force Test Device for Charging Gun Complied Standards & Clauses Conforms to IEC 62196-1 2022 clause 16.16. Product Overview The structure of the charging interface should make it easy to insert the charging gun. Check whether the maximum force required to insert the charging gun into the appliance socket is within the range specified by the standard. The force for inserting the charging gun into the socket: Place the charging gun vertically downward

UN 38.3 Sine Shock Control Vibration 51mm Test System 5～3500Hz Complied Standards & Clauses This vibration system is required by UN 38.3 clause 4.3 test T.3, IEC 62133-1:2017 clause 7.2.2, IEC 62133-2:2017 clause 7.3.8.1, etc. Product Overview Vibration testing is the act of exciting or shocking a component or device to see how it would react in a real environment. The application range of vibration test is extremely wide, from industrial products such as circuit boards,

IEC60884-1 Electric Vehicle Connector Terminal Mechanical 75mm Test Equipment Complied Standards & Clauses Conforms to IEC60884-1:2006 clause 12.2.5,clause 12.3.10 and figure 11, IEC60669-1:2007 clause 12.2.5,clause 12.3.10 and figure 10, IEC60998-2-2:2002 clause 10.105 and figure 101, UL486A-B:2009 clause 9.3.2.1,clause 9.3.2.3,clause 9.3.2.4 and table 26 and figure 6. Product Overview Samples and restrictions: Screw-type terminals, thread less terminals and connectors.

Charging Interface Breaking Capacity and Normal Operation Test Device Complied Standards & Clauses Conforms to IEC62196-1:2022. Product Overview It is used to test whether electrical accessories such as electric vehicle charging interfaces, industrial plugs and sockets, and couplers can withstand the mechanical stress, electrical stress and thermal stress that occur during normal use without excessive wear or other harmful effects, with the purpose of verifying their

IEC62368-1 300V Limited Short Circuit Current Withstand Test System Complied Standards & Clauses Conforms to Appendix R in IEC62368-1:2019. Product Overview The system uses an energy storage device to store energy according to the set parameters, and discharges when the set voltage is reached to realize the large current output test function. The attenuation oscillation frequency of the current is 50±2Hz, simulating the power frequency, and the peak current can reach 14KA

IEC60309-1 Charging Vehicle Plug and Socket Cable 140N Bending Testing Machine Complied Standards & Clauses Conforms to IEC62196-1:2014 clause 7.11 and clause 7.15, IEC60309-1:2012 clause 24.4. Product Overview Samples and restrictions: Electric vehicle charging interfaces, industrial plugs, sockets and couplers. Application: Used to test the bending connection part of the "mechanical strength" part of the power connection cable of the charging vehicle plug and socket. Test

Multi-position Mobile Manual Release Socket Mechanical Strength Test Device Complied Standards & Clauses Conforms to IEC62196-1:2022. Product Overview Samples and restrictions: Charging gun cable assembly. Application: Check the mechanical strength of the charging gun cable assembly. Test principle: Use a clamp to fix the sample at a height of 1000mm from the ground and drop it to verify its mechanical strength. Usage environment: Power supply: -, working temperature 0-40℃,