EV Connector Testing Equipment

IEC 62196 New Energy Vehicle Charging Connector Plug Drive Over Test Equipment Complied Standards & Clauses IEC 62196-1Ed.4 CDV 2020 “Plug, socket-outlets, vehicle connectors and vehicle inlets–Conductive charging of electric vehicle-Part1: General requirements” clause 33.2 and 33.3. Equipment Overview Samples and Restrictions: Accessories (such as plugs or vehicle connectors) wired with the minimum size cable of a type recommended by the manufacturer. Application: It is used

IEC62196 Electric Vehicle Charging Plug and Socket Withdrawal Insertion Force Test Equipment Complied Standards & Clauses IEC62196-1:2014 "Plug,socket-outlets,vehicle couplers and vehicle inlets–Conductive charging of electric vehicle-Part1:Charging of electric vehicles up to 250A a.c and 400A d.c" Equipment Overview Samples and Restrictions: New energy charging vehicle plug, locking device between vehicle sockets and plug socket connector Test Purpose: It is used to test the

IEC 62196 Electric Vehicle Couplers Over-pressure Test System Complied Standards & Clauses This misalignment test apparatus conforms to IEC62196-3 clause 101.6. Equipment Overview This overpressure test system meets the test requirements of IEC 62196-3-1 Cl 101.6. It is used to carry out pressure leakage test on the sealing requirements of the liquid coolants under 10L volume. The system's booster pump outputs high pressure to verify the pressure resistance of the samples

IEC62196-3 Electric Vehicle Single Station Plugs And Connectors Misalignment Test Apparatus Complied Standards & Clauses This misalignment test apparatus conforms to IEC62196-3 clause 36.3, figure 18. Equipment Overview During temperature rise test, immediately following temperature stabilization, the accessories are subjected to external mechanical loads as illustrated in Figure 18. Using a force gauge, apply a load of 100 N with a tolerance of -0/+10 N as illustrated in

Electric Vehicle Tinsel Cord Bending And Snatch Test Equipment Complied Standards & Clauses IEC 60227-1 clause 5.6.3.2, 5.6.3.3; IEC 60227-2 clause 3.2, 3.3; and etc. Equipment Overview The Tinsel Cord Bending and Snatch Test Equipment is designed and manufactured according to the standard requirement of IEC 60227-1 clause 5.6.3.2, 5.6.3.3; IEC 60227-2 clause 3.2, 3.3; and etc. It is used to test the bending resistance of finished cables and PVC insulated cables, and also

IEC 62196 Electric Vehicle 150L Thermal Shock Test Chamber Complied Standards & Clauses IEC 62196-1 Ed.4CDV 2020 clause 34.3. IEC 60068-2-14 (Test Na) Equipment Overview This thermal shock test chamber conforms to IEC 60068-2-14 (Test Na) and it is required by IEC 62196-1Ed.4CDV 2020 clause 34.3. The 3-Zones Thermal Shock Test Chamber is required by IEC60335 Annex J, meets the standard requirements of IEC 60068-2-1:2007, Environmental Testing—Part 2-1: Tests—Test A: Cold, IDT

IEC 62196 Electric Vehicle Air Saturated Test Chamber 304 Stainless Steel Complied Standards & Clauses IEC 62196-1 Ed.4CDV 2020 clause 30. Equipment Overview This air saturated test chamber is required by IEC 62196-1Ed.4CDV 2020 clause 30. It is used to process further rusting in saturated water vapor for plugs, screws and other metal components after being soaked in ammonium chloride water. Chamber features: 1. Adopt microcomputer temperature controller. +, M. +. Control LED

IEC 62196 Electric Vehicle Constant Water Bath Testing Equipment 304 stainless steel Complied Standards & Clauses IEC 62196-1 Ed.4CDV 2020 clause 30. Equipment Overview It adopts stainless steel inner liner, and advanced digital display temperature control method. The water is stirred at the bottom of the liner to ensure that the water temperature is even up and down. Technical Parameters Inner size 1000mm*1000mm*1000mm Input voltage Three phase380V, 50Hz Max. power 5KW

IEC 62196 Electric Vehicle Material 304 Stainless Steel Ball Pressure Test Apparatus Complied Standards & Clauses IEC 62196-1 Ed.4CDV 2020 clause 29.3. IEC60695-10-2 Edition 3 2014-2 fig 1. Equipment Overview The ball pressure tester is designed and manufactured according to IEC60695-10-2 Edition 3 2014-2 fig 1. It is required by many standard requirements such as IEC 62196-1Ed.4CDV 2020 clause 29.3. It is parts of non-metallic materials for resistance to heat. It is

IEC 62196 Electric Vehicle Leakage Tracking Test Equipment Complied Standards & Clauses IEC 62196-1 Ed.4CDV 2020 clause 28.4, 29.6. IEC60335-1 clause 29.2 and Annex N, IEC 60065:2014 clause 13.4, IEC60598-1, IEC 60884-1:2013 clause 28.2, UL746A ASTM D3638-92 Equipment Overview The tester is designed and manufactured according to the standard requirements of IEC60112, and required by IEC 62196-1Ed.4CDV 2020 clause 28.4, 29.6, IEC60335-1 clause 29.2 and Annex N, IEC 60065:2014

IEC 62196 Electric Vehicle Creepage Distance Test Cards 30 sizes/set Complied Standards & Clauses IEC 62196-1 Ed.4CDV 2020 clause 28. Equipment Overview These creepage gauges is required by conform to IEC 62196-1Ed.4CDV 2020 clause 28. They are used to determine the shortest path between two conductive parts, or between a conductive part and the bounding surface of the equipment, measured along the surface of the insulation, with specifications made according to the

IEC62196 75N Test Rod For Electric Vehicle Accesories Endurance Test Complied Standards & Clauses IEC 62196-1Ed.4CDV: 2020 "Plugs, Socket - Outlets and Couplers for Industrial and Similar Applications, and For Electric Vehicles" clause 26.6. Equipment Overview This 75N test rod is required by Conforms to IEC 62196-1Ed.4CDV 2020 clause 26.6. Test principle: One plug contact of the same system is applied for 1 min with a force of 75 N against the shutter of an entry hole in a

IEC62196 Electric Vehicle Screwed Glands Torque Test Apparatus Complied Standards & Clauses IEC 62196-1Ed.4CDV: 2020 "Plugs, Socket - Outlets and Couplers for Industrial and Similar Applications, and For Electric Vehicles" clause 26.5, table 15. Equipment Overview This screwed gland tester conforms to IEC 62196-1Ed.4CDV 2020 clause 26.5, table15. Based on the above table, the torque range is 5N.m to 12.5N.m. As per client’s requirements, the torque needs up to 50N.m, so there

IEC62196 Electric Vehicle Non-Rewireable Accessories Mechanical Strength Flexing Testing Apparatus Complied Standards & Clauses IEC 62196-1Ed.4CDV: 2020 "Plugs, Socket - Outlets and Couplers for Industrial and Similar Applications, and For Electric Vehicles" clause 26.4, fig 20. IEC60309-1: 2012 clause 24.4 figure 9. Equipment Overview The flexibility testing apparatus is designed and manufactured according to requirements of IEC62196-1: 2020 clause 26.4 figure 20, IEC60309-1

IEC62196 Electric Vehicle Plugs And Connectors Steel Ball Impact Device Complied Standards & Clauses IEC 62196-1: 2020 "Plugs, Socket - Outlets and Couplers for Industrial and Similar Applications, and For Electric Vehicles" clause 26.2, fig 8, table 13. ... Equipment Overview The steel ball impact device conforms to the requirements of IEC 62196-1Ed.4CDV 2020 clause 26.2, fig18, table 13. It is suitable for mechanical strength for accessories to verify whether accessories

IEC62196 Electric Vehicle Connectors Temperature Rise Test System Complied Standards & Clauses IEC 62196-1 Ed.4CDV 2020 clause 24. IEC 62196-3 Ed.4CDV 2020 clause 24. IEC 60309-1: 2012 clause 22. ... Equipment Overview This temperature rise test system meets the standard requirements of IEC 62196-3: 2020 clause 24, IEC 62196-1: 2020 clause 24, IEC 60309-1: 2012 clause 22, etc. It is suitable for detecting the temperature rise test after the charging pile interface plug and

IEC62196 Electric Vehicle Constant Temperature and Humidity Chamber Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 20.3, 29.2,35.3,37.1. IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT” IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT” IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT” IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp

IEC 62196 Electric Vehicle Sand And Dust Test Chamber Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 20.2 IEC60529 Fig 2 IEC 60884-1:2013 clause 16.2 IEC60598-1-2008 IEC60335-1 Clause 22.1 Equipment Overview The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the electrical and electronic products, car and motorcycles spare parts and seals. In order to detect the use, storage, transport performance of the

IEC 62196 Electric Vehicle Integrated IPX1~8 Waterproof Test System Complied Standards & Clauses IEC 62196-1Ed.4CDV:2020 clause 20.2. Equipment Overview This IPX1~8 waterproof test system conforms to IEC 60529:2013. This system includes following: No. Name IP Code Remark 1. Vertical Rain Drip Test Apparatus IPX1~2 Controlled by Control Cabinet on IPX7 2 Oscillating Tubes Test Apparatus IPX3~4 Controlled by Control Cabinet on IPX7 3 Spray Nozzle IPX3~4 Controlled by Control

IEC 62196 Electric Vehicle Natural Circulation Heating Testing Chamber Complied Standards & Clauses IEC 62196-1Ed.4CDV:2020 clause 15. Equipment Overview This device conforms to IEC 62196-1Ed.4CDV 2020 clause 15. It is used to perform thermal aging test to polymer materials (plastics, plastics and electrical insulating materials such as: wire and cable sheathing, heat shrinkable tube, rubber test or PVC materials, and the insulating components, or use for drying, baking, heat