Stud And Track Roll Forming Machine

K Span Roll Forming Machine Galvanized Sheet Metal Roll Forming Machines Product Description Specification: 1) Main machine dimension: 9.65m*2.23m*2.4m 2) Bending machine dimension; 3.8m*2.23m*2.4m 3) Suitable material: galvanized steel, colored steel, etc 4) Coil thickness: 0.6 –1.5mm 5) Roller stands:16 6) Roller diameter:80mm 7) Totally power:18.5kw 8) Main Power:7.5kw; Hydraulic power:4.0kw; side bending power:1.5kw*2 Curving power:4.0kw 9) Roller material: 40Cr 10) Shaft

Double Raw Or Three Raw Furring Channel Roll Forming Machine High Efficiency Product Descriptions Furring channel is a main material made of light steel and used for ceilings of ceilings. It is connected to the floor by screws and is used to fix ceilings or objects. It is used to decorate the exterior wall and the roof of the building, which is made of plaster board, decorative plasterboard, etc. It is suitable for the decoration of the roof of various buildings, the inner

Building House Drywall Keel Light Steel Frame Roll Former drywall stud track make machine ,steel light roll former Material hardness 550mpa-350mpa Loading capacity 1.5T Uncoiling width 300mm Inner diameter 450-550mm Processing material GI Material thickness 0.3-0.8mm Frame thickness 25mm Drive mode gear Forming speed 20m/min Formed width 46.5mm Material of shafts 45#steel with tempering of keel roll forming machine Diameter of shafts φ52mm NO. of rollers 10 rollers Components

Metal Roof Panel Arch Plate / Span Roll Forming Machine 62# Forge Steel K-Span metal Roof panel roll forming machine specification K Span Roll Forming Machine Roll Formed Profile Type: K-Span metal Roof panel 914-610 Raw material width: 914 mm Raw material thickness: 0.4-0.7mm Line speed: 12-15 m/min Rollers station: 17 sets Material of roller: 62# forge steel, polished Material of main shaft: 45# forge steel, Ф85mm Main power: 7.5kw Hydraulic station power: 4kw Hydraulic

Arch Bending K-Span Roll Forming Line , Metal Forming Equipment K-Span Buildings with K-span arched panels K-span buildings are a new form of construction. K-span arched panels are seamed together to form an economical and watertight steel structure. The final shape and strength of the materials used cancels the need for columns, beams, or any other type of interior support. All of the panel-to-panel connections are joined using an electric automatic seaming machine. Because

114mm Depth Groove Span Roll Forming Equipment Colored Steel Basic parameters of this large span roofing sheet roll forming machine Main Technical Specification: Size: 11650mm × 2230mm × 2300mm Total Weight: about 15000KG Feeding Width: 1000mm Effective Width: 800mm Proper span: ≤18m Sheet operating factor: 80% Total MotorPower:18.9KW Bending power: 3.0kw+1.1kwx2; Sewing power: 2.2kw Cutting power: 4.0kw; Forming power: 7.5kw Controlling system: PLC & Manual Cutting:

Structural Steel K Span Roll Forming Machine With Long Operating Life Key Specifications Features: All rollers are forged from structural steel and are processed intensely Surfaces of rollers are plated with hard chromium Rollers have high hardness and long operating life Power set to automatically transport colored steel sheet equipped in forming press section, which can press colored steel sheet with thickness of 0.5 to 1.5mm Not needed to frequently adjust clearance

Mounted k Span Roll Forming Machine With Automatic Snap Lock Panel Rollformer K-SPAN ROLL FORMING MACHINES (TRAILER-MOUNTED MACHINERY) This kind large span curving roof roll forming machine is mounted on a trailer, forming a type of “mobile factory” that is easily towed to even the remotest construction sites when installing standing seam metal roofs or curved roof panels. An important aspect of this machine is that it can be transported anywhere in the world easily. Once the

Wall Angle Cold Roll Forming Equipment PLC Control 380v 3 Phase 50hz Product Descriptions Wall Angle is the perimeter member for ceiling metal framework. This is fixed to the wall. The two sides of the V-shaped groove are symmetrically and orderly arranged with an anchor-like hook. The hook can be formed into an imperial or metric combination with the auxiliary keel. The main keel and the auxiliary keel are connected with an eight-centimeter screw to make it stronger and

Large Span Curving Roof Roll Forming Machine For Radome Building Introduction Roll Forming Machine All the rollers are forged from the high quality structural steel and are processed intensely. The surfaces of the rollers are plated with hard chromium. The rollers have a high hardness and long operating life. The power set to automatically transport the colored steel sheet is equipped in the forming press section, which can press the colored steel sheet with the thickness of

Durable K Type Roller Forming Machine Fully Automatic Galvanized Product Description Technical parameters of PR-600-305 Size 8900mmX2200mmX2300mm Total Weight About 10Ton Cutting Material 12CrMoV, Heat treatment Cutting type Mechanical Cutting Device Forming type Roll-formed and length-set cutting Main Motor Power 5.5KW Bending Power 3.0KW+1.5KW Cutting Power 4.0KW Seaming Power 1.1KW+1.1KW Material of rollers 45# steel, quenched HRC 55~65 Feeding width 600mm Finished width

High Speed K Span Arch Roof Rolling Forming Machine For Construction 1. Our machines can uses galvanized steel sheet, colored armor plate or aluminum plate as the material plate. 2. Controlling by computer, PLC display, operation is easy, running is steady and reliable,endurable, maintenancefree 3. We can make and design will kinds of roll forming machine according to customer's request. Technical data: Thickness of sheet: 0.8-1.5mm Mounting dimension of K-Span Arch Roof Roll

15 M / Min Working Speed k Span Roll Forming Machine With Free Accessories Main Specification Size: 9300mm × 2250mm × 2500mm Total Weight: about 13tons Main Motor Power: 17.0KW forming power is 7.5kw ; bending power is 3.0kw; cutting power is 3.0kw Working Speed: Straight sheet: 15m/min Arch sheet: 13m/min Sewing: 6m/min Material of rollers: 45# steel, quenched HRC 58-62 Material of roller shafts: 45# steel, adjusted Material of cutting blade: Cr12 steel (Taiwan Airline