Push Pull Pickling Line
Push Pull Acid Pickle Production Line 500000Ton
500000Ton Push-pull Acid Pickling Production line /Push-pull type This structure can avoid neoprene lined to break when the granite stone is replaced. Between each tank section there is acid liquid squeezing Roll and acid liquid isolation room, at bottom the land with granite stone lined is at the same horizontal level with the down roll of the squeezing rubber roll. On the coil running platform there is one granite stone cover. Squeezing roll is driven by frequency
Hydrochloric Acid Pickling Line 400000T/Year
400,000Ton Push-pull Acid Pickling Production line Beijing JJRS Technology Development Co., Ltd. registered in national high tech park-Beijing Economic and Technological Development Zone, is high-tech enterprise specialized in the complete set of metallurgical equipments, intensive processing of steel strip and metal surface coating engineering project, with the integration of mechanism, optics, electric and hydraulic pressure. JJRS is professional on turn-key projects, from
Hot Pickling Line Acid Regeneration Plant 1.4mm 4.0mm 1350mm 200000t/Y
200000t/y Push-pull Acid Pickling Production line 1.4~4.0mm*1350mm (excellent) This production line is push-pull acid pickling unit, which adopts the most advanced Shallow Trough Turbulence Acid Pickling Technology. The equipment and technology are reliable, advanced and mature. Whole set equipment and technology could fulfill buyer’s need of steady production and long-term running which is proved by actual practice. This technology is featured by reasonable structure, high
Annealing And Pickling Line Acid Line 400000TPY
400,000Ton Push-pull Acid Pickling Production line Beijing JJRS Technology Development Co., Ltd. registered in national high tech park-Beijing Economic and Technological Development Zone, is high-tech enterprise specialized in the complete set of metallurgical equipments, intensive processing of steel strip and metal surface coating engineering project, with the integration of mechanism, optics, electric and hydraulic pressure. JJRS is professional on turn-key projects, from
Steel Push Pull Pickling Line Process With Hot Air Drying Device 30-180m/Min
Push Pull Pickling Line with Hot Air Drying Device (high-value, high-quality) Technical Specification 1.Product and capacity 1)Product specification Material: Low carbon steel and middle carbon steel Steel No.: SPCC, SPCD, SPCE, SS400, Q195, Q215 and Q235, etc. Delegated steel No.: Q215 Coil inside diameter: D=Φ610mm Coil outside diameter: D=Φ1100~Φ2050mm Strip width: 1000~1500 mm Strip thickness: 1.2~3.0mm Max. coil weight: 25MT Mechanical property: σs≤360N/mm2 Quality
Narrow Carbon Steel Coils Push Pull Pickling Line 350000Ton/Year
350000Ton Push-pull Acid Pickling Production line /Push-pull type Building the most advanced galvanizing systems to perfection and excellence that fosters ultimate business growth for our customers is the core motive of our foundation. This unwavering commitment to ensure customer success and our passion to drive a difference by fabricating efficient solutions build the base of our approach. We work in close cooperation with our customers by understanding their exact needs.
Semi Continuous Push Pull Pickling Lines For Hot Rolled Strip
Pickling line of Steel Strip with Push-Pull type (large capacity) Comprised by 6 acid tanks Acid tanks are made with welding carbon steel, the tank wall is lined with 6mm acid-resistant rubbers, then covered with 2 layers of granite stones. And there are acid inlet port, liquid returning port and waste discharging port set inside the tank. Guiding granite is also set inside the tank for threading. There is PPH glass steel cover sealed with tank walls on the top of the tanks
Cgl Continuous Push Pull Pickling Line Metal Processing
Pickling line of Steel Strip with Push-Pull type (large capacity) The seller shall be responsible for the completeness and reliability of the process performance and equipment; the buyer shall be responsible for any design and equipment supply changes caused by technical solution changes that exceed contract scope. Seller supply scope does not include spare parts. The seller shall be responsible for instruction for equipment installation, commissioning to guaranty that the
Steel Strip Push Pull Pickling Line Large Capacity 180m/Min
steel strip pickling line with Push-Pull type large capacity The seller shall be responsible for the completeness and reliability of the process performance and equipment; the buyer shall be responsible for any design and equipment supply changes caused by technical solution changes that exceed contract scope. Seller supply scope does not include spare parts. The seller shall be responsible for instruction for equipment installation, commissioning to guaranty that the
PPH Push Pull Pickling Line Steel Coil Processing Equipment
Push-pull Acid Pickling Production Line with excellent quality for customer This production line is push-pull acid pickling unit, which adopts the most advanced Shallow Trough Turbulence Acid Pickling Technology. The equipment and technology are reliable, advanced and mature. The equipment and technology could fulfill buyer’s need of steady production and long-term running, which is proved by actual practice. This technology is featured by reasonable structure, high
Acid Pickling Equipment Push Pull 2.0mm 4.0mm 1300mm 800000t/Y Stainless Steel
2.0~4.0mm*1300mm 800000t/y Push-pull Acid Pickling Production Line Equipment and system configuration The uncoiling section is equipped with double pay off reels to reduce the coil loading time, improve the utilization rate of the unit and increase the capacity. The entry section is equipped with 9-roll pinch straightener, end and angle cutting shears to ensure the passing ability of strip steel. The pay-off reel in the entry section is powered. It can automatically uncoils
Push Pull Ss Steel Pickling Line Process 200000t/Y
High Quality of Push-pull Acid Pickling Production line 200,000t/y Pre-cleaning section cleans the coils independently. Water spraying section adopts water circled spraying method. Flushing water is added from 4th grade cleaning tank. It locates in water collection box is at bottom of cleaning tank. Then flushing water flows from 4th grade to 1st grade gradually and at last discharges into flushing water collecting tank from 1st grade overflow port. Whole acid pickling tank
200000t/Y Continuous Pickling Line In Steel Industry 1.4mm 4.0mm 1350mm
1.4~4.0mm*1350mm (excellent) Push-pull Acid Pickling Production line 200,000t/y The acid pickling tanks are divided into 3 sections. Tank wall is carbon steel structure lined with acid-resistance neoprene and 2-layer granite stone. This structure can avoid neoprene lined to break when the granite stone is replaced. Between each tank section, there is acid liquid squeezing roller and acid liquid isolation room. At bottom, land with granite stone lining is at the same