Stainless Steel Strips

Stainless Steel Strips 410S NO.1 2B 8K Stainless Steel Strip Coil 410S Stainless Steel Strip Features: 410S stainless steel strip, also called 410 martensitic steel strip. 410S strip has good wear resistance with good formability and good weldability, it can be used as ultra-high strength material. The rust resistance, corrosion resistance and weldability of 410S are better than 400 series of 420J2 stainless steel strip, which are used for parts with high toughness and impact

Cold Rolled Aisi 304L Stainless Steel Strips With 0.1mm 0.2m Thick 304L Stainless Steel Strip Features: 304L stainless steel strip is 300 series stainless steel, which is one of the most widely used stainless steel strips due to its corrosion resistance and nice fabrication. Both 304 and 304L stainless steel strips can be used for many similar applications and the differences are minor, but they really do exist. 304L stainless steel strip has lower carbon contents than 304

Stainless Steel 347 Strips SUS Standard Stainless Steel 347 Strip 347 Stainless Steel Strip Features: Alloy 347H (UNS S3409) stainless steel plate is the higher carbon (0.04 – 0.10) version of the alloy. It was developed for enhanced creep resistance and for higher strength at temperatures above 1000°F (537°C). In most instances, the carbon content of the plate enables dual certification. Alloy 347 stainless steel plate cannot be hardened by heat treatment, only by cold

310S Stainless Steel Strips Mirror Finished Stainless Steel Strip 310S Stainless Steel Strip Features:Alloy 310 (UNS S31000) is an austenitic stainless steel developed for use in high temperature corrosion resistant applications. The alloy resists oxidation up to 2010oF (1100oC) under mildly cyclic conditions.Because of its high chromium and moderate nickel content, Alloy 310 is resistant to sulfidation and can also be used in moderately carburizing atmospheres.The more

317L Stainless Steel Strips ASTM 317L Stainless Steel Strips Roll 317L Stainless Steel Strip Features: Alloy 317L (UNS S31703) is a low carbon corrosion resistant austenitic chromium-nickel-molybdenum stainless steel. The high levels of these elements assure the alloy has superior chloride pitting and general corrosion resistance to the conventional 304/304L and 316/316L grades. The alloy provides improved resistance relative to 316L in strongly corrosive environments

316L Stainless Steel Strips Cold Rolled 0.7mm 0.8mm 1.0mm Thickness 316L Stainless Steel Strip Features: Alloy 316/316L is non-magnetic in the annealed condition, but can become slightly magnetic as a result of cold working or welding. It can be easily welded and processed by standard shop fabrication practices. Chinese Standard (GB)-old grade: 00Cr17Ni14Mo2, new grade: 022Cr17Ni12Mo2, Japanese standard: SUS316L, American standard ASTM-316L, as a low-c series of 316 steel, in

420J2 Stainless Steel Strips 1.5mm Thick Stainless Steel Strip 420J2 Stainless Steel Strip Features: Stainless steel grade 420J2 (UNS S42000) is cheap and extremely corrosion resistant steel. it’s sensible corrosion resistance in gentle atmosphere also as domestic and industrial environments. it’s additionally immune to dilute acid, acid, ammonia, crude oil, detergent solutions, vinegar, food acids, many rock oil merchandise, and steam. 420J2 stainless steel strip, also

301 Stainless Steel Strips Cold Rolled Stainless Steel Strip Price 301 Stainless Steel Strip Features: The 301 stainless steel belt is a kind of metastable austenitic stainless steel with complete austenitic structure under the condition of sufficient solution. In stainless steel, 301 is the most easily cold deformation strengthening steel grade, through the cold deformation processing can make the strength of steel, hardness, and retain enough plastic and toughness, together

304 Stainless Steel Strips Cold Rolled SS 304 Precision Strip 304 Stainless Steel Strip Features: The most important elements in 304 stainless steel strip are Ni and Cr, but they are not limited to these two elements. The specific requirements are stipulated by the product standards. The common judgment in the industry is that as long as the Ni content is greater than 8% and the Cr content is greater than 18%, it can be considered as 304 stainless steel. 304 stainless steel

321 Stainless Steel Strip Features: 321 stainless steel strip is a Ni-Cr-Mo austenitic stainless steel material, its performance is very similar to 304 stainless steel strip. But due to the addition of alloy titanium content, it has better resistance to grain boundary corrosion and high temperature strength. It effectively controls the formation of chromium carbide. 321 austenitic stainless steel strip has good

420J1 Stainless Steel Strips Cold Rolled Stainless Steel Strip 420J1 Stainless Steel Strip Features: 420J1 characteristic of this Martensitic grade is its ability to be hardened by heat treatment. Thus, when quenched they attain high levels of resistance enabling the achievement of a cutting edge. Combined with their good corrosion resistance, this aptitude meets the requirements of many applications. 420J1 stainless steel strip is mostly used to manufacture parts that are

Grade 430 Stainless Steel Strips 2B BA Mirror Hot Cold Rolled Strip 430 Stainless Steel Strip Features: 430 stainless steel strip refers to a 430 stainless steel strip with a width of 600mm or less, also called 430 stainless steel strip or 430 stainless steel strip. 430 stainless steel strip can be divided into two annealing states: cold-rolled and hot-rolled. The thickness range of 430 cold-rolled steel strip is 0.038-3.0mm; the thickness of hot-rolled steel strip is 3.0-6

2507 Stainless Steel Strips Cold Rolled Stainless Steel Strip Coil 2507 Stainless Steel Strip Features: 1) High resistance to chloride stress corrosion cracking 2) Strong resistance to chloride pitting and crevice corrosion 3) High strength 4) Strong general corrosion resistance 5) Suggested for applications up to 600° F 6) Good weldability / workability 7) Resistant to pitting and crevice corrosion in seawater 2507 Stainless Steel Strip Chemical Composition (%): Element

904L Stainless Steel Strips 2B BA 8K Finished Stainless Steel Strip 904L Stainless Steel Strip Features: Super austenitic stainless steel 904L (00Cr20Ni25Mo4.5Cu, UNS: N08904, EN: 1.4539) is a low carbon, high-alloy austenitic stainless steel with excellent corrosion resistance in dilute sulfuric acid. It is designed for harsh corrosion conditions. 904L super austenitic stainless steel is a low carbon, high nickel, molybdenum austenitic stainless steel, It has the high

309S Stainless Steel Strips Stainless Strip 309S Precision Slit 309S Stainless Steel Strip Features: 309S corresponding to the Chinese brand is 0Cr23Ni13, the American standard S30908 (AISI, ASTM) characteristics and use: corrosion resistance, heat resistance are better than 0Cr19Ni9. The 309S is a variant of the lower carbon 309 stainless steel for use where soldering is required. The lower carbon content minimizes the precipitation of carbides in the heat affected zone near

201 Stainless Stee Strips Stainless Steel 201 Strip For Building 201 Stainless Steel Strip Features: The nickel in grade 201 is lower than 301 and is replaced with a manganese-nitrogen combination allowing this type to develop high yield and tensile strength in the annealed condition. Although the mechanical and corrosion properties are alike, its general uses do not cover the field of the comparative 300 series. 201 stainless steel strip is nonmagnetic when annealed yet

409L Stainless Steel Strips Cold Rolled Stainless Steel Strip In Coil 409L Stainless Steel Strip Features: 409L is the most widely used chromium nickel stainless steel with good corrosion resistance, heat resistance, low temperature strength and mechanical properties. It is resistant to corrosion in the atmosphere. If it is an industrial atmosphere or a heavily polluted area, it needs to be cleaned in time to avoid corrosion. Suitable for food processing, storage and

2205 Stainless Steel Strips Astm Aisi 2205 Stainless Steel Strip 2205 Stainless Steel Strip Features: Early dual phase stainless steel can resist uniform corrosion of medium strength and chlorine stress corrosion fracture, but its performance will be greatly reduced when it is used in welding. In order to improve this situation, nitrogen is added to the duplex stainless steel 2205, which not only improves the corrosion resistance, but also has a good welding performance. Due