Flash Memory IC Chip

The SN65C3232PWR is a dual RS-232 line driver and receiver IC operating from 3V to 5.5V. It supports data rates up to 1 Mbit/s with low 300 μA supply current. Features ±15 kV ESD protection and latch-up performance exceeding 100 mA, ideal for industrial communication interfaces.

The RCV420JP is a monolithic precision current-loop receiver converting 4-20mA input to 0-5V output with 0.1% accuracy. Features built-in sense resistors, 10V reference, ±40V common-mode range, and 86dB CMR. Ideal for process control, industrial automation, and SCADA systems. No external adjustments needed.

Dual 10-Ohm SPDT analog switch IC with low ON-state resistance (15 Ω at 125°C), 1.8V to 5.5V supply, and 5-V tolerant control inputs. Ideal for battery-powered equipment and audio/video signal routing. Supports break-before-make switching and exceeds 100 mA latch-up per JESD 78.

Low ON-state resistance of 0.75 Ohm with excellent matching and break-before-make switching. Supports 2.25V to 5.5V supply and 1.8V control logic. IEC 61000-4-2 Level 4 ESD protection on COM port. Ideal for portable audio and battery-powered devices.

High bandwidth 7-channel VGA multiplexer/demultiplexer with 1.3 GHz bandwidth, integrated level shifting buffers, and ESD protection up to ±2 kV. Ideal for notebooks, docking stations, and KVM switches.

The TS3USBA225 is a 2-channel SP3T multiplexer supporting USB 2.0 High-Speed (480 Mbps) and MHL signaling. Features low 6.5Ω on-resistance, 1.9 GHz bandwidth, and audio switch with negative rail capability. Includes power-down mode and ESD protection. Ideal for smartphones, tablets, and portable devices.

The TS3USB3000RSER is a DPDT multiplexer integrating a high-speed MHL switch and USB 2.0 switch. It features 6.1 GHz bandwidth, low RON, overvoltage tolerance up to 5.5V, and IOFF protection. Ideal for smartphones and portable devices.

Precision adjustable current-limited power distribution switch for USB and industrial applications. Features 22-mΩ high-side MOSFET, fast 3.5-μs overcurrent response, and ±6.5% accuracy at 4.5 A. UL and IEC60950-1 certified. Supports 2.5 V to 6.5 V operation.

Precision power-distribution switch with adjustable current limit from 75 mA to 1.7 A. Features 85-mΩ MOSFET, ±6% accuracy, fast 2-μs overcurrent response, and 15-kV ESD protection. Ideal for USB ports and hubs.

Integrated USB 2.0 high-speed data line switch and power distribution IC. Supports BC1.2 and non-BC1.2 charging modes, adjustable current limit up to 3A, 73mOhm MOSFET. Ideal for USB ports, notebooks, and wall adapters. UL and CB certified.

The TPS2511 is a USB dedicated charging port controller with a 70-mΩ power switch. It auto-detects and supports BC1.2, Divider, and 1.2V charging schemes. Features programmable current limit (±10% at 2.3A), hiccup short-circuit protection, and cable compensation. Ideal for vehicle chargers and USB wall adapters.

Integrated USB power switch and boost converter for 5V USB ports from 1.8V to 5.25V input. Supports up to two standard USB ports with adjustable current limit up to 1400mA. Features fast overcurrent response, 15kV ESD protection, and small SON-10 package. Ideal for portable and battery-powered applications.

IEEE 802.3at Type-2 compliant PoE PD controller with 100V 0.5-ohm hotswap MOSFET, 850mA continuous current, and 15kV ESD protection. Ideal for security cameras, VoIP phones, and access points. PowerPAD package for enhanced thermal performance.

Combines IEEE 802.3at PoE PD interface with a current-mode DC-DC controller for isolated converters. Supports up to 30W input, high-efficiency topologies, and adapter ORing. Features a 100V 0.5Ω hotswap MOSFET and programmable frequency. Ideal for security cameras, access points, and VoIP phones.

The TPS22980 is a current-limited power mux for seamless switching between 3.3V low voltage and 4.5-19.8V high voltage supplies. Features adjustable current limit, thermal shutdown, reverse current blocking, and make-before-break switching. Ideal for notebook and desktop power management systems. Available in a compact 4x4mm QFN package.

Integrated single-channel load switch with 6A max continuous current and 16mOhm on-resistance. Supports 0.6V to 5.7V input range. Features configurable rise time, thermal shutdown, and optional quick output discharge. Available in compact 2mm x 2mm SON-8 package with thermal pad. Ideal for notebooks, SSDs, and telecom systems.

High-side power-distribution switch with integrated 70mΩ MOSFET, adjustable current limit from 500mA to 2.1A. Features reverse voltage protection, thermal shutdown, and IEC61000-4-2 ESD compliance. Ideal for USB ports, laptops, and hubs. UL listed and AEC-Q100 qualified.

The TPS23861PWR is a quad port IEEE 802.3at PSE controller supporting 25.5 W per port. Features automatic PD detection, classification, and DC disconnect. Enables two-layer PCB design with Kelvin sensing. Supports automatic and semi-automatic I2C modes for intelligent power management.

Automotive-qualified CAN transceiver meeting ISO 11898-5. Features ±8 kV ESD protection, low-current standby

The SN65HVD08DR is a 3.3V to 5.5V RS-485 transceiver IC supporting up to 10 Mbps data rate. Features failsafe receiver, 256-node bus capacity, and 16-kV HBM ESD protection. Ideal for industrial process control and isolated multipoint data buses.