Wound Fin Tube

1.ASTM A179 Carbon Steel Wound KL Fin Tube ASTM A179 is a **low-carbon seamless carbon steel** specification dedicated to heat exchanger tubes, renowned for its excellent formability, weldability, and cost-effectiveness. It is engineered for low to medium-temperature service environments, providing reliable structural integrity in general corrosive and thermal cycling conditions. The KL-type finned tube refers to a special fin structure, also known as the knurled finned tube.

ASME SA179 Carbon Steel Seamless Tube With 1060 Aluminum Fin Wound L Type Fin Tube For Air Cooler/Heater Product Specifications Product Name Wound L Type Fin Tube Bare Tube Specification & Material ASME SA179 Fin Material Aluminum 1060 Bare Tube OD 16-63mm Fin Height

ASME SA179 L-Type Fin Seamless Tube For air coolers,heat exchanger What is L-type finned tubes? An L-type finned tube is a finned tube with an L-shaped cross-section. Its feature is that fins are installed on one or both sides of the pipe to enhance heat transfer. The fins are usually made of aluminum or copper and are continuously spirally wound around the outer surface of the base pipe under tension. What is manufacturing process of L-type finned tubes? Material Selection

ASTM A249 TP304 Wound L Type Tube For Bolier Heat Exchanger ASTM A249 TP304 has excellent corrosion resistance in ordinary atmospheric conditions, making it suitable for a wide range of applications where exposure to corrosive environments is a concern.This material has high ductility and excellent drawing, forming, and spinning properties, which makes it easy to shape and form into various configurations as required for different applications.ASTM A249 TP304 is designed to

ASME SA192 KL Type Finned Tube with Al1060 Fins For Heat Recovery Steam Generators ASME SA192 KL Type Finned Tube with Al1060 Fins is a high-performance heat exchanger tube. It consists of a strong steel core tube (SA192) designed to handle high pressure, mechanically bonded to highly efficient aluminum fins (Al1060) that maximize heat transfer. The "KL Type" specifies the physical shape and attachment method of the fins. It's essentially a best-of-both-worlds component: the

Wound Fin Tube ASME SA179 KL Type With Aluminium Strip For Heat Exchanger Product Description KL-type wound fin tubes are produced by tightly wrapping an aluminum strip around the base carbon steel tube under controlled tension. During the process, the base of the aluminum strip is simultaneously knurled and wound, ensuring a tight mechanical bond between the fin and the tube. This structure provides good heat transfer efficiency and prevents fin loosening during service. KL

ASME SA179 KL Fin Tube Manufacturing Process Base Tube Preparation: A SA179 seamless steel tube is cut to the required length and thoroughly cleaned to remove contaminants like oil, rust, and scale. Fin Winding: The tube is rotated in a high-speed finning machine. Simultaneously, a strip of fin material is fed through a precise guide and wound spirally around the tube's exterior. Mechanical Bonding: For a "KL" type fin, the root of the fin strip has a specific geometric shape

ASME SA179 L Type Finned Tube with Al1060 Fins For Air Cooled Heat Exchangers In simple terms, ASME SA179 L Type Finned Tube with Al1060 Fins is a high-efficiency heat exchanger tube. It combines the strength and pressure-handling capability of a carbon steel core tube with the superior heat transfer properties of aluminum fins. Here are some detailed breakdowns: 1. Core Tube: ASME SA179 seamless base tubes Material: Low-carbon steel (1) Chemical Composition The chemical

ASME SA179 Carbon Steel Seamless Tube KL Fin Tube For Heat ExchangerProduct DescriptionThe KL-type fin tube is manufactured from an ASME SA179 carbon steel seamless tube as the base, with Aluminium 1060 fin strip wound around the tube. The strip is knurled (K) into the tube surface to lock the fin foot firmly, and then wound (L) under controlled tension to achieve strong mechanical bonding and high thermal efficiency. This structure is widely used in air coolers, condensers,

ASME SA179 Carbon Steel Fin Tube KL Type With Al 1060 Strip For Air Cooler Product Description The KL-type fin tube is manufactured from an ASME SA179 carbon steel seamless tube as the base, with Aluminium 1060 fin strip wound around the tube. The strip is knurled (K) into the tube surface to lock the fin foot firmly, and then wound (L) under controlled tension to achieve strong mechanical bonding and high thermal efficiency. This structure is widely used in air coolers,

ASME SA179 Carbon Steel Wound Fin Tube KL Type With Aluminium 1060 Strip Product Description The ASME SA179 carbon steel wound fin tube (KL type) is manufactured by tightly winding an Aluminium 1060 strip around the base carbon steel tube. The foot of each fin strip is knurled (K) into the tube surface to improve bonding strength, and then the strip is tension wound (L) along the tube length to ensure close contact and excellent thermal conductivity. This construction

ASME SA179 KL Type Finned Tube With AL1060 Fins For Economizer and Air Heater An ASTM A179 KL Type Finned Tube With AL1060 Fins is a carbon steel core tube (ASTM A179) that has been mechanically altered to have a knurled, footed "KL" fin design, onto which aluminum fins (made from alloy AL1060) are embedded. Its primary purpose is to efficiently transfer heat in applications like economizers, air heaters, and other heat recovery systems. Here are some detailed breakdowns: 1.

ASTM A179 Carbon Steel Fin Tube L Type With Al1060 Fin Strip For Heat Exchabger Product Overview The ASTM A179 Carbon Steel Fin Tube L Type is produced by wrapping Aluminum 1060 fin strips onto a low-carbon seamless steel tube. The "L Type" attachment method mechanically locks the base of the aluminum strip onto the tube surface, ensuring tight contact and efficient heat transfer. This design is widely used in heat exchangers, condensers, and air coolers, where corrosion

ASTM A249 TP304L L Type Finned Tube With AL1060 Fins For Waste Heat Recovery Units ASTM A249 TP304L L-Type Finned Tube with AL1060 Fins is a specialized heat exchanger component designed for efficient heat transfer in various industrial applications. Here's a detailed breakdown: 1. Base Tube: ASTM A249 TP304L Material: Stainless Steel 304L (low carbon variant, ≤0.03% carbon). Standard: ASTM A249 specifies seamless and welded austenitic steel tubes for boilers, heat exchangers

ASME SA179 KL-Type Finned Tubes With AL Fin For Air Cooler Heat Exchangers​ 1. Material & Chemical Composition​ Base Tube Material: ASME SA179 carbon steel, which is a high-quality cold-drawn low-carbon steel with excellent mechanical properties and processability.​ Fin Material: High-purity aluminum, known for its good thermal conductivity, ensuring efficient heat transfer between the tube and the air.​ The chemical composition of ASME SA179 carbon steel is as follows:​ ​

ASTM A249 TP304 L Type Spiral Wound Finned Tube With Al1100 Fins For Coolers What is L type Spiral Wound Finned Tube? L-type spiral wound finned tube is a type of heat exchanger tube that has a continuous helical fin wound around the outside surface of the tube. The fins on the tube are tightly serrated, and they are wound in a continuous spiral, creating a helical configuration. The L-type fin has a rectangular shape, and its height is greater than that of the base metal or

ASTM A179 Carbon Steel Wound Fin Tube With Al1060 Fin Strip For Air Cooler Product Overview ASTM A179 carbon steel wound fin tube with Al1060 aluminum fin strip is a widely used heat transfer element in air cooler systems. The base tube (A179) is seamless cold-drawn low-carbon steel with excellent heat transfer performance and good machinability. The fins are made of high-purity Al1060 aluminum, known for superior thermal conductivity, lightweight nature, and strong corrosion

A179 Wound L Type Fin Tube Carbon Steel Seamless Tube For Air Cooler Product Specifications Base Tube Material Aluminum 1060 Fin Wall Thickness ~0.4mm Fin Tube Test HT/ET Heat Transfer Efficiency Excellent Type Spiral Wound Fin Tubes L Type Size And Details According to clients' need Base Tube Standard ASTM A179 , ASME SA179 Tube Type Seamless Product Description This L Type Wound Fin Tube is made using ASTM A179 carbon steel seamless tube as the base tube and a high-purity

ASTM A179 L-Type Wound Finned Tube For HRSG And Boilers Product Specifications Base Tube Standard ASTM A179 Type Wound, L Type, LL Type, KL Type Bare Tube Diameter 16mm-63mm Fin Pitch 2.1mm-5mm Fin Height 35 MPa (Tested per ASTM E8) Recommended Medium Steam/Hot Water Air/Gases Key Applications & Value Highlights Power Plant Boilers: Economizer sections for flue gas heat recovery. HVAC Systems: Air heating coils in commercial ventilation units. Industrial Dryers: Conveyor belt

ASTM A179 L Finned Tube With Aluminum 1060 Fins For Air-Cooled Heat Exchangers ASTM A179 L Type Finned Tube with Aluminum 1060 Fins is a type of heat exchanger tube designed for efficient heat transfer in applications such as boilers, condensers, and heat recovery systems. Here's a detailed breakdown: 1. Base Tube (ASTM A179) Material: Low-carbon steel (carbon content ≤ 0.06%) Standard: ASTM A179 (Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger