Wound Fin Tube

L-Foot Finned Tube ASTM A179 With Al-1060 Fins For Air-Cooled Condensers An L-Type Finned Tube is a type of extended surface heat exchanger tube designed to improve heat transfer efficiency. It features fins that are helically wound (L-shaped) and attached to the outer surface of the base tube, increasing the surface area for better thermal performance. Key Features of L-Type Finned Tubes: Fin Attachment Method: The fins are embedded into a groove on the tube's outer surface

Stainless Steel Welded Tube, ASTM A249 TP304, L Fin Tube, Fin Fan Tube Product Specifications Attribute Value Tube Ends Plain Fin Spacing 2.0mm-20mm Fpi 9-13 Tube Diameter 3/8 inch Fin Thk 0.4mm Packing Ply-wooden Case With Iron Frame Product Overview The ASTM A249 TP304 stainless steel L-fin tube is a welded austenitic stainless steel tube wrapped with helically wound L-type fins, typically made from aluminum or stainless steel. The L-shaped fin is tightly wound under

ASME SA249 TP304 Stainless Steel Welded Tube L Type Fin Tube For Air Cooler The ASME SA249 TP304 Stainless Steel Welded Tube with L-Type Fin is an energy-efficient, corrosion-resistant, and high-performance heat exchanger tube ideal for air coolers and condensers. Its L-type fin structure ensures optimal thermal efficiency, durability, and cost-effectiveness in HVAC, power plants, and industrial cooling applications. Key Features 1. Base Tube Material: ASME SA249 TP304

ASTM A179 Carbon Steel Wound L Fin Tube With Al1060 Fins for Boiler Systems Economizers ASTM A179 carbon steel wound L fin tubes with Al1060 aluminum fins are high-efficiency heat transfer components specially designed for economizers in boiler systems. The base tube is manufactured in accordance with ASTM A179/A179M, which specifies cold-drawn low-carbon seamless steel tubes with good thermal conductivity and mechanical strength suitable for heat exchange service. The fins

Base Tube ASME SA179 Type: Seamless, cold-drawn low-carbon steel tube. Key Properties: Excellent thermal conductivity, good internal corrosion resistance (for clean fluids), smooth internal bore (minimizes pressure drop), high-pressure capability, easily weldable. Typical Applications: Primarily used in heat exchangers, boilers (economizers, superheaters), condensers, and other pressure vessels involving water, steam, oil, or gas on the tube side. Key Properties: Exceptional

Premium Tension Wound L-Type Fin Tube (ASTM A179 Carbon Steel Base & AL Fin) Welcome to our highly efficient L-Type Finned Tubes product page. Designed for optimal thermal transfer and robust durability, our L-Foot fin tubes feature an ASTM A179 cold-drawn seamless carbon steel base tube tightly wrapped with high-purity Aluminum (AL 1060/1100) fins. The L-shape tension-wound manufacturing process ensures maximum contact area between the fin and the tube, making it the most

ASTM A249 TP304 L-Type Wound Finned Tube With Al1060 For HVAC Systems I. Product Overview This ASTM A249 TP304L L-type wo und finned tube is a high-efficiency heat transfer component. Made with a TP304L stainless steel base tube, it offers excellent corrosion resistance and reliable mechanical performance. The tube is helically wound with Al1060 aluminum fins, and the L-type fin foot ensures firm contact and strong bonding. With high thermal conductivity and an extended heat

A179 L Type Fin Tube Application Heat Exchangers: A179 fin tubes are often used in heat exchangers to improve efficiency by increasing the surface area for heat transfer. Cooling Systems: They are utilized in cooling systems, such as air conditioning units and refrigeration systems, to efficiently dissipate heat. Boilers: In boiler systems, fin tubes help maximize heat absorption from the combustion gases. Power Plants: They are employed in power generation plants for heat

ASTM A179 L-Type Wound Finned Tube For HRSG And Boilers Product Specifications Base Tube Standard ASTM A179 Type Wound, L Type, LL Type, KL Type Bare Tube Diameter 16mm-63mm Fin Pitch 2.1mm-5mm Fin Height 35 MPa (Tested per ASTM E8) Recommended Medium Steam/Hot Water Air/Gases Key Applications & Value Highlights Power Plant Boilers: Economizer sections for flue gas heat recovery. HVAC Systems: Air heating coils in commercial ventilation units. Industrial Dryers: Conveyor belt

Wound Type Fin Tube ASME SA249 TP316L Stainless Steel Welded Tube The Wound Type Fin Tube ASME SA249 TP316L Stainless Steel Welded Tube offers a high-performance solution for heat exchangers, ensuring excellent heat transfer efficiency, durability, and resistance to harsh environments. Its wound type fin design enhances heat dissipation while maintaining the structural integrity needed for high-pressure, high-temperature applications. Key Features 1. Base Tube Material: ASME

ASTM A249 TP304 L Type Spiral Wound Finned Tube With Al1100 Fins For Coolers What is L type Spiral Wound Finned Tube? L-type spiral wound finned tube is a type of heat exchanger tube that has a continuous helical fin wound around the outside surface of the tube. The fins on the tube are tightly serrated, and they are wound in a continuous spiral, creating a helical configuration. The L-type fin has a rectangular shape, and its height is greater than that of the base metal or

Wound Finned Tubes for Heat Exchangers – ASME SA179 Carbon Steel Tubes Product Overview Wound Finned Tubes manufactured with ASME SA179 carbon steel tubes are widely used heat transfer components designed for improving thermal efficiency in heat exchangers, air heaters, economizers, and industrial cooling systems. The wound fin tube is produced by helically winding a metal strip onto the outside surface of the base tube and mechanically locking the fin foot into a knurled or

Premium Wound Fin Tube (ASTM A179 Carbon Steel Base + Aluminum Fin) 1. Detailed Introduction of ASTM A179 + Aluminum Wound Fin Tube The Wound Finned Tube (L-Type), combining an ASTM A179 seamless carbon steel base tube with an Aluminum (AL) fin, is a highly efficient heat transfer component designed for demanding industrial applications. By leveraging the excellent pressure resistance of A179 carbon steel and the superior thermal conductivity of aluminum, this composite

Wound KL Fin Tube Carbon Steel ASTM A179 For HVAC And Refrigeration Chemical Composition (%) max Grade C Mn P S A179 0.06-0.18 0.27-0.63 0.035 0.035 Mechanical Properties Grade Tensile Strength min Yield Strength min Elongation in 2" or 50mm min A179 47ksi (325 MPa) 26ksi (180 MPa) 35% Advantages of Base Tubes A179 For HVAC And Refrigeration Excellent thermal conductivity: ASTM A179 is cold‑drawn low carbon steel with min. wall thickness, providing stable and efficient heat

A179 Wound L Type Fin Tube Carbon Steel Seamless Tube For Air Cooler Product Specifications Base Tube Material Aluminum 1060 Fin Wall Thickness ~0.4mm Fin Tube Test HT/ET Heat Transfer Efficiency Excellent Type Spiral Wound Fin Tubes L Type Size And Details According to clients' need Base Tube Standard ASTM A179 , ASME SA179 Tube Type Seamless Product Description This L Type Wound Fin Tube is made using ASTM A179 carbon steel seamless tube as the base tube and a high-purity

ASME SA179 Carbon Steel Seamless Tube KL Fin Tube For Heat ExchangerProduct DescriptionThe KL-type fin tube is manufactured from an ASME SA179 carbon steel seamless tube as the base, with Aluminium 1060 fin strip wound around the tube. The strip is knurled (K) into the tube surface to lock the fin foot firmly, and then wound (L) under controlled tension to achieve strong mechanical bonding and high thermal efficiency. This structure is widely used in air coolers, condensers,

ASTM A179 L-Type Finned Tube with AL1060 Fins For Heat Exchangers and Boilers An L-Type finned tube is a type of heat exchanger component used to enhance heat transfer between fluids (liquids or gases) in industrial applications, such as power plants, petrochemical facilities, HVAC systems, refrigeration, and more. The key feature of an L-Type finned tube is its unique fin attachment method, which forms durable and effective fins around the outer tube surface. The ASTM A179 L

Air Cooler Tube ASTM A179 Carbon Steel Fin Tube L Type Wound Fin Tube OD25.4MM Key Features: Base Tube Material: ASTM A179 Carbon Steel, a seamless carbon steel tube known for its excellent strength, durability, and thermal conductivity, widely used in heat exchangers and air cooler systems. Fin Material: L Type Wound Fin, which is wrapped around the tube in a spiral pattern to create an increased surface area, improving heat exchange efficiency and promoting better cooling.

1.ASTM A179 Carbon Steel Wound KL Fin Tube ASTM A179 is a **low-carbon seamless carbon steel** specification dedicated to heat exchanger tubes, renowned for its excellent formability, weldability, and cost-effectiveness. It is engineered for low to medium-temperature service environments, providing reliable structural integrity in general corrosive and thermal cycling conditions. The KL-type finned tube refers to a special fin structure, also known as the knurled finned tube.

Wound L Fin Tube ASME SA209 Welded Base Tube With AL1060 Fins In Air Cooler ASME SA209 is a specification by the American Society of Mechanical Engineers for seamless carbon-molybdenum alloy-steel tubes, primarily used in boilers, superheaters, and heat exchangers. These tubes are designed for high-temperature and high-pressure environments. The base tube is made from a carbon-molybdenum (C-Mo) alloy steel, known for its strength, creep resistance, and durability under