ASTM A179 L-Type Wound Finned Tube For HRSG And Boilers
Price:
Negotiable
MOQ:
200-500KGS
Delivery Time:
45-75 Days (Depend on Customer's Requirement
Brand:
YUHONG
Product Description
ASTM A179 L-Type Wound Finned Tube For HRSG And Boilers
Product Specifications
| Base Tube Standard | ASTM A179 |
| Type | Wound, L Type, LL Type, KL Type |
| Bare Tube Diameter | 16mm-63mm |
| Fin Pitch | 2.1mm-5mm |
| Fin Height | <17mm |
| Fin Thickness | ~0.4mm |
| Application | Petrochemical, Power Generation, HVAC Industries |
Product Overview
ASTM A179 L-Type Wound Finned Tube is a cost-effective heat transfer solution designed for moderate-temperature applications. It features a seamless low-carbon steel base tube (ASTM A179) with L-shaped aluminum fins mechanically wound under tension. This robust construction creates maximum fin-to-tube contact area, delivering 25% higher heat transfer efficiency than bare tubes in boilers, economizers, and heat recovery units. Ideal for non-corrosive environments up to 150°C (302°F), it balances performance and budget with minimal maintenance.
Chemical & Mechanical Properties
Chemical Composition (ASTM A179 Base Tube)
| Element | Content (%) | Role |
|---|---|---|
| Carbon (C) | ≤ 0.06 | Weldability |
| Manganese (Mn) | 0.27-0.63 | Strength |
| Phosphorus (P) | ≤ 0.035 | Purity |
| Sulfur (S) | ≤ 0.035 | Ductility |
| Silicon (Si) | ≥ 0.10 | Deoxidation |
| Thermal Conductivity | 51.9 W/m*K (Base) | 204 W/m*K (Fin) |
Mechanical Properties (System)
| Property | Base Tube (A179) | Aluminum Fin (1100) |
|---|---|---|
| Tensile Strength | ≥ 325 MPa | 95-125 MPa |
| Yield Strength | ≥ 180 MPa | 35-50 MPa |
| Max Service Temp. | 260°C (500°F) | 150°C (302°F) |
| Fin Bond Strength | - | > 35 MPa (Tested per ASTM E8) |
| Recommended Medium | Steam/Hot Water | Air/Gases |
Key Applications & Value Highlights
- Power Plant Boilers: Economizer sections for flue gas heat recovery.
- HVAC Systems: Air heating coils in commercial ventilation units.
- Industrial Dryers: Conveyor belt dryers for food/paper processing.
- Thermal Oil Heaters: Secondary heat exchangers in hydraulic systems.
- Biomass Energy: Low-pressure steam generators.
Why Choose Our Wound Fin Tubes?
30% Cost Saving: Most economical finned tube solution vs. extrusion/welding.
Easy Installation: Lightweight design reduces structural support needs.
Scale Resistance: Smooth aluminum fins minimize ash/fouling buildup.
Rapid Delivery: Standard sizes (OD 19-50mm, Length ≤ 12m) in stock.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
YUHONG HOLDING GROUP CO., LTD
Location
20 Floor, No.1 New World Building, NO.1018 Min'an Road, Yinzhou District, Ningbo, China, ZIP:315040
Contact Person
Sales Dept.