Silicone Potting Compound

Hanast 10:1 Potting Compound Insulation And Moisture-Proof Potting AB Adhesive Black Two-Component Silicone Adjustable Customization HN-8808B 1) Good adhesion, no corrosion 2) solid Small chemical shrinkage 3) no heat release, good insulation 4) wide temperature range (-50℃-200℃) 5) waterproof and moisture-proof Product Model Potting glue 8808B, is a two-component condensation type room temperature curing silicone rubber, also known as RTV 2 Liquid Silicone Rubber, composed

HN-8806 Two-Component Addition-Type Silicone Potting Rubber Product Specification Test Items Test Standard Units Product test results Part A Part B Before curing 1 Appearance --- --- Grey, fluid White, fluid 2 Viscosity GB/T10247-2008 25ºC, mPa·S 4500~5000 4500~5000 3 Density GB/T 13354-92 25ºC, g/cm³ 1.50±0.05 1.50±0.05 4 Mixing Ratio (A : B) 1:01 Weight ratio 100 100 Volume ratio 100 100 5 Operating time Measured hr 0.3-0.4 6 Curing condition Measured hr 4^12 (25ºC,initial

Easy-Use Potting Compound HN-8808 - 10:1 Mix Ratio, 60 Min Work Time for Simple Application Product Overview for Silicone Potting Compound: We understand that process stability is as important as product performance. The HN-8808 series potting compounds, with their moderate viscosity, generous 40-60 minute pot life, and predictable curing profile, provide ample tolerance for your production process. Easy for both beginners and automated systems to handle, they effectively

Automotive Grade Potting Silicone HN-8806A/B | Protection for EV Battery Packs & Control Modules Product Overview for silicone potting compound: Infuses reliability into automotive electronics. HN-8806 meets the stringent demands of automotive applications, providing excellent thermal conductivity, flame retardancy, insulation, and vibration resistance. It is the ideal potting material for Electric Vehicle battery packs (BMS), motor controllers, and on-board chargers. Key

0.8 W/M·K Silicone Potting Compound 1:1 Two-Component Addition Type Silicone Potting Rubber For Electronic Components High And Low Temperature Resistance Silicone Potting Material PRODUCT DESCRIPTION HN-8806, two-component addition type silicone potting rubber which can be cured into high-performance elastomer by room temperature or heating. This potting silicone rubber has excellent electrical insulation, high moisture resistance, and a wide temperature range of -50°C to 250

RTV Two Component Silicone Potting Compound Thermal Conductive Waterproof Low Viscosity for Protecting PCB Sensor and LED Encapsulation HN-8808 Household Appliance Sealing Silicone Product Specification №. Items Technique Request 1 Exterior Transparent / White / Grey Liquid 2 Viscosity mPa.S (before curing) A: 2000, B: 50 3 Specific gravity (23℃) 0.98 4 In commission time (h, 25℃) 1–2h 5 Entirely sulfuration time (min, 25℃) 8–12h 6 Hardness (JIS A) 25A 7 Volume resistivity (Ω

Low Viscosity 1:1 Thermal Conductivity Potting Glue Two-Component Silicone Potting Compound for Electronic Components Circuit Board Connector Features of RTV Silicone Potting Compound: Flexible silicone glue Low shrinkage rate, no corrosion of components after curing. Flame retardant, high and low -temperature resistance from -50ºC to 250ºC (58°F to 432°F). Excellent electrical properties and Thermal conductivity. * Color: Grey, white, black Product description of RTV

White Potting Gel HN-8808W - Non-Yellowing, Aesthetic & Reliable Circuit Board Protection Product Overview for Silicone Potting Compound: The HN-8808W White Potting Compound is designed for electronic applications where product appearance and long-term stability are key. Its pure white color provides clear visual identification for product series differentiation and quality traceability. It offers excellent non-yellowing properties, maintaining a fresh appearance even after

Silicone Manufacturer Waterproof Silicone Potting Compound High Thermal Conductivity 1:1 Potting Glue Adhesive For Led Driver Power Module Battery Inverter Description of silicone potting compound for electronics HN-8806, two-component addition type silicone potting rubber which can be cured into high-performance elastomer by room temperature or heating Product Features of silicone potting compound for electronics Excellent electrical insulation, high moisture resistance, and

Key attributes CAS No. 7085-85-0 Place of Origin China Main Raw Material Silicone Usage Electronic ballasts, Capacitors, Power supplies, Relays Brand Name Hanast Classification Other Adhesives EINECS No. 230-391-5 Other Names Silicone Potting Compound Type Two-Component Product name Hanast Rtv-2 Potting Silicone Rubber Features Low viscosity, Non-corrosive to copper, Thermally Conductive Color White, Gray (can be customized) Keyword electric insulation, good waterproof and

Soft Silicone Potting Compound For Stress-Free Protection Of Sensitive PCB Boards Product Overview for Silicone Potting Compound: Process stability is equally critical to product performance. The HN-8808 series potting adhesives come with moderate viscosity and a 40–60 minute working time, alongside reliable curing properties. Easy to use for both new operators and automated equipment, they lower scrap rates and optimize production efficiency. Key Performance Parameters for

High Thermaly Conductivity Silicone Potting Glue For Electric Vehicles (EV) & Automotive Electronics 1:1 Potting Compound Excellent Electrical Insulation Product Overview for silicone potting compound: 3.0 Thermal Conductivity Potting Compound refers to a liquid encapsulating material with a thermal conductivity of (3.0 W/(mcdot K)). It rapidly transfers heat generated by electronic components to a heat sink and is widely utilized in new energy vehicle battery packs, power

3.0 W/M·K High Performance Silicone Potting Compound | EV Battery Packs, OBC, Inverters & Energy Storage Product Overview for silicone potting compound: Engineered for high-performance thermal management in electric vehicles (OBC, DC/DC, battery packs), industrial power supplies, and renewable energy systems (inverters, storage). UL 94-V0, wide operating temperature (-50°C to 200°C), and excellent electrical insulation. Easy 1:1 mix ratio, low viscosity for automated

Two-Part RTV Silicone 2.0 W/M·K Thermally Conductive Grey Encapsulant For EV Batteries LED Modules Product Overview for silicone potting compound: The RTV 2 Addition Potting Compound HN-8820A/B is a two-component, low viscosity organic silicone. It has an excellent thermal conductivity and good fluidity, with a 1:1 mixed ratio. It can cure at room temperature or with heat .It is mainly used for potting protection of general electronic components, power modules and circuit

High-Performance 1:1 Silicone Encapsulants For Ultimate Protection For Power Supply Battery Weatherproof Silicone Potting Compound Product Overview for silicone potting compound: Two-component silicone potting compounds feature properties such as water and moisture resistance, dust protection, electrical insulation, and shock resistance. With a moderate hardness, they effectively fill gaps between electronic components to enhance overall protective performance. Additionally,

High Dielectric Strength Silicone Potting Compound For High Voltage Power Components Product Overview for Silicone Potting Compound: The HN-8808 Series Potting Compounds meet the stringent reliability requirements of automotive electronics. Their excellent elastomeric properties effectively absorb mechanical vibration and shock stress. The wide operating temperature range (-50°C to 200°C) ensures stable performance in harsh environments like engine compartments. This product

UV Resistance 10:1 Clear Silicon Potting Compound For LED Drivers, Flexible Light Strips Product Overview for Silicone Potting Compound: 10:1 transparent silicone potting compounds—typically of the addition-curing (platinum-catalyzed) or neutral de-alcohol condensation type—command distinct high-end application scenarios within industrial manufacturing, thanks to their exceptional transparency (characterized by high light transmittance), superior resistance to yellowing, and

Two-Component 10:1 Silicone Encapsulant Waterproof RTV-2 Slicone Potting Rubber Potting Material For LED Driver Product Overview for Silicone Potting Compound: Process-Friendly Silicone Potting for High-Yield Manufacturing The HN-8808 Series potting compounds balance high performance with unmatched process stability. Featuring a well-balanced viscosity and an extended 40–60 minute working time (pot life), this series offers an forgiving curing window for diverse production

Silicone Potting Compound For New Energy Vehicle Motor Stator Protection Product Overview for Silicone Potting Compound: HN-8808 is a two-component, low-viscosity potting compound. It cures at room temperature into soft, flexible rubber. Featuring strong adhesion, it bonds well with aluminum, iron, acrylic and PC plastics, effectively enhancing waterproof and sealing performance. Product Highlights for Silicone Potting Compound: 1. Easy to process: Extended pot life supports

Grey Black Electricalsilicone Potting Compound For Electronics Waterproof Thermal Potting Silicone For Connector PCB Cable Product description: Silicone potting compound is an electronic encapsulation material primarily made of silicone rubber. It is used to protect electronic components and provides waterproofing, moisture resistance, insulation, and shock resistance. After curing, it forms an elastomer that remains stable over a wide temperature range and exhibits good