2K Epoxy Resin and Curing Agents

It is a water-soluble modified polyamine adduct, recommended to be used with water-based epoxy resin, designed for anti-corrosion primers for various metal substrates and epoxy floor paints. Physical Property: Item Value Testing Method Appearance Light yellow transparent liquid Visual Non-Volatile content(%) 40±2 GB/T 1725-2007 Viscosity(mPa.s)(25℃) 2000 ~ 8000 GB/T 21059-2007 Active hydrogen equivalent 300±10 ---- Performance: This cost-effective waterborne epoxy curing

Ethanol As Thinners Water Based Epoxy Curing Agent With Extremely Stable Gloss For Epoxy Primers Product Introduction It is a water-soluble modified polyamine adduct. It can be self-dried when combined with water- based epoxy resin or baked dry. It is especially recommended for the preparation of self-drying water-based epoxy coatings. It is recommended to use PM, BCS, or compound deionized water for dilution. When compounding with deionized water for dilution, it is

WL-AC041 is a modified amine water-based epoxy curing agent. Features: high gloss, good adhesion, fast drying speed, long operation time, good compatibility with water-based epoxy resin. Application: Used with water-dilutable epoxy resin for water-based self-drying or forced-drying metal protective coatings. suitable for wet-on-wet (WOW) application conditions (referring to the capability to directly apply a second coat of paint onto a substrate with incompletely cured primer

This zinc-free, high-build water based epoxy primer system is engineered for heavy-duty anti-corrosion applications requiring thick film deposition (>1200 μm DFT per ISO 2808). The formulated coating delivers: Water resistance: >360 hours (ISO 9227 CW) Salt spray resistance: >360 hours (ASTM B117) Construction solids content: ≥70% by mass (ISO 11901) Featuring optimized non-volatile content and reduced pigment-volume concentration,the system maintains excellent mechanical

This product exhibits superior flexibility and impact resistance due to its relatively low glass transition temperature (Tg). It is recommended for formulation blending with other grades of similar epoxy resin systems. Features: good flexibility, long pot life, grindable, can be applied at 5~10℃ , owned good adhesion in short-term low-temperature baking, and suitable for different formulations. Application areas: Used in water-based metal anti-rust primer with epoxy curing

It is a water-based epoxy dispersion, which is recommended to be used with a water-based epoxy curing agent to prepare high-performance water-based epoxy coatings. It is designed for anti- corrosion primers and epoxy floor paints for various metal substrates. Features: Faster surface drying speed, suitable for various wet-on-wet matching processes, rapid hardness build-up, and long pot life period Physical Property Appearance Milky white liquid Non-volatile matter (Wt, %) 54

A two-part waterborne epoxy resin system formulated with WL-EP213 and WL-C040 curing agents, designed as ambient-cure polymers. These thermosetting resins specialize in producing heavy-duty primers and interior coatings for metal substrates, offering energy-efficient alternatives to heat-cured powder coatings. Key Performance Features 1. Rapid curing with exceptional durability: Delivers tough, UV-resistant protective coatings featuring high ultimate hardness, mar resistance,

Product Description: It is a water-based epoxy dispersion. It is recommended to be used with super epoxy curing agent to prepare high-performance water-based epoxy coatings. It is designed for anti-corrosion primers, topcoats, etc. for various metal substrates. WL-AD223 Waterborne 2K Epoxy Resin, when combined with our proprietary WL-AC042 Curing Agent, forms a high-performance coating system designed for decorative applications requiring gloss retention. This system is

WL-AD224 is a modified light yellow transparent liquid epoxy resin. It is recommended to be used with a waterborne epoxy curing agent to prepare a two-component waterborne epoxy zinc-rich coating. It is designed for anti-corrosion primers for various metal substrates. The WL-AD224 coating system utilizes our company's proprietary WL-AC043 hardener, forming a two-component epoxy zinc-rich coating specifically engineered for heavy-duty corrosion protection. During the

High-Performance 2K Epoxy Coating System for Extreme Corrosion Protection ‌ Our zinc-rich epoxy coating system combines two advanced components: ‌WL-AD224 epoxy emulsion ‌: Features superior self-emulsification, extended pot life, and exceptional resistance to water/salt spray (3,000+ hours) ‌WL-AC043 curing agent : Delivers instant self-emulsification and anti-sagging properties for uniform film formation This dual-component system achieves ‌3,000+ hours salt spray

我们的双组分水性环氧涂料体系由 WL-AD223 水性环氧树脂和 WL-AC042 水性环氧固化剂组成,具有出色的防腐性能,旨在提供: 无需 防锈添加剂——我们的创新配方实现了卓越的盐雾防护 l 经验证的耐盐雾性: 在降低的 15μm DFT 下 保持 >240 小时的耐盐雾性│ 最大保护时间为 720 小时 l 在不同基材上均具有优异的附着力 l 多用途涂层:经验证可用作:(1)底漆(2)面漆(3)一体化底面漆 l 优异的光泽性能稳定性 l 延长适用期,简化施工 金属 一体化 底面漆 WL-AD22 3 双组分水性 环氧树脂 物理 性能 物品 价值 外貌 乳白色液体 非挥发性物质含量 ( % ) 53±2 粘度(mPa.s) ( 25℃) 500-8000 环氧当量(以 g/Eq 为单位) 1010±50 WL-AC04 2 环氧固化剂 物理性能 特性 单位 价值观 固体含量 重量 百分比 ​ 49-51 粘度(25℃) --- 300-3000 ​ ​ ​ 活性氢当量 (供应形式 g/Eq) 247 实验数据: WL-AD223树脂与WL

Combining WL-AD201 waterborne epoxy resin and WL-AC047 curing agent, this 2K epoxy system exhibits superior high-gloss retention alongside outstanding resistance to salt spray, acids, MEK, and harsh chemicals. Its unique versatility allows application as a standalone primer, topcoat, or integrated primer-topcoat solution. WL-AD201 Waterborne Epoxy Resin Physical Property Appearance Milky white liquid Non-volatile matter (Wt, %) 54±2 Viscosity (mPa ·s) (25 ℃ ) 500 ~ 8000 Epoxy

WL-AD201 water based 2k epoxy resin WL-AD201 is an ‌aqueous epoxy dispersion‌ engineered for formulating high-performance waterborne epoxy coatings when paired with compatible waterborne epoxy curing agents. This product is ‌specifically designed for‌ anti-corrosion primers and epoxy floor paints for across diverse metal substrates. ‌Key Characteristics:‌ ✓ ‌Accelerated surface drying‌ ✓ ‌Broad wet-on-wet process compatibility‌ ✓ ‌Rapid hardness development‌ ✓ ‌Extended pot

The "wet-on-wet" coating process involves applying a subsequent coat directly over the preceding layer before it has fully dried. This method is implemented to enhance production efficiency, reduce energy consumption, and strengthen inter-coat adhesion. Successful implementation requires coating compatibility, optimal application intervals, and controlled environmental conditions. The two-component (2K) epoxy system combining WL-AD203 with curing agent WL-AC046 meets all wet

The two-component system combining WL-AD203 water-based epoxy resin with WL-AC049 curing agent delivers coatings with broad substrate compatibility, 1000+ hour salt spray resistance, and long-term blister-free performance. WL-AD203 waterborne epoxy resin ‌ WL-AD203 Waterborne Epoxy Dispersion ‌ delivers high-performance coatings when crosslinked with compatible epoxy curing agents. Designed for corrosion-resistant primers and metal floor coatings, its key features include

The two-component (2K) water-based epoxy primer system, formulated with WL-AD203 epoxy dispersion and WL-AC046 curing agent, offers rapid drying and cost efficiency. Specifically engineered for: l Corrosion-resistant primers on multiple metal surfaces l High-performance epoxy floor coatings The accelerated surface cure enables wet-on-wet application processes. Within automotive sector experiencing significant growth, this system serves as a corrosion-resistant compartment

Our R&D team has successfully formulated a two-component (2K) epoxy coating system composed of: WL-AD203 epoxy dispersion (Component A) WL-AC040 water-based epoxy hardener (Component B) Performance Characteristics: • Fast surface drying properties • Exceptional corrosion resistance (>300 hours salt spray test) • Excellent water resistance (>15 days immersion) • Economical formulation for metal substrate priming Complete Automotive Coating Solution: This advanced 2K epoxy