Dowsil Adhesive

Product Simple Attributes Color: Mixed gray Form: Two component liquid silicone rubber (A/B ratio 1:1) Thermal conductivity: 2.72 W/m · K Viscosity: 10800 cP for component A/9960 cP for component B before mixing Curing method: room temperature curing or heating accelerated curing (60-100 ° C) Product Introduction​ ​ DOWSIL™ TC-6020 is a two-component, gray-colored silicone elastomer designed for encapsulating and protecting PCB assemblies in harsh environments. Its 1:1 mix

Dowsil TC-4525 Thermally Conductive Gap Filler for Automotive Electronics Cooling Product Description Dowsil TC-4525 is a two-part, room temperature cure silicone gap filler with thermal conductivity of 2.5 W/m*K, low compression stress, and controlled silicone volatility. Product Introduction This material cures to a soft and compressible elastomer designed to dissipate heat from components on printed circuit boards to heat sinks, providing a reliable cooling solution.

DOWSIL™ TC-5121C LV High-Efficiency Thermal Grease: Advanced TIM Solution Basic Properties Greenish yellow flowable non-curing compound. Optimized polymer matrix reduces pump-out, designed for thermal management in mid-to-high end PCB assemblies. Enhanced Features 1. Ultra-thin application: Bond Line Thickness (BLT) down to micron scale (Per doc: "Can achieve thin BLT") Stable thermal performance: 2.8 W/m·k conductivity with 0.09°C-cm²/W resistance @40psi Electrical safety:

Dowsil 7920LV High-Performance One-Part Thermal Die Attach in Microelectronics Packaging Basic Product Attributes DOWSIL™ 7920-LV Die Attach Adhesive is a one-part, black, thixotropic silicone adhesive with self-priming capability. It cures upon heating for flexible processing, features a low modulus to minimize stress, offers optimized viscosity for ease of dispensing, and is solventless to reduce voiding potential. Product Description DOWSIL™ 7920-LV is a high-performance

Dowsil 8888 Gasket Beige Sealant for Automotive Gasket Screen Printing Applications Product Description Dowsil 8888 is a one-part, neutral cure, flowable beige sealant that cures to a tough rubbery solid at room temperature on exposure to air. Product Introduction This ready-to-use sealant offers superior substrate flow and wetting capability, specifically designed for screen printing over automotive gaskets. Special Attributes Provides excellent adhesion to metals, plastics,

DOWSIL™ 737 Sealant: High-Performance One-Part Silicone For Industrial Applications​ Product Attributes DOW's DOWSIL™ 737 is a primerless, one-part neutral cure silicone sealant compliant with ASTM C920. It features rapid room-temperature curing (3-6 min skin time), extreme temperature resilience (-65℃ to 177℃), UV stability, and permanent elasticity from 100% silicone rubber formulation. Core Characteristics The oxime cure mechanism activates upon airborne moisture exposure

Dowsil EA-4100 Needle-Dispensed Adhesive for Electronics Encapsulation Basic Properties Dowsil EA-4100 is a one-part, moisture-cure white paste adhesive with density 1.42 g/cm³ (cured), Shore A hardness 45, and elongation at break 250%. Designed for needle dispensing in electronics encapsulation, operable from -45°C to 200°C. Product Description EA-4100 cures via ambient moisture-triggered condensation, eliminating heating systems (tack-free in 9 min@25°C). 260 g/min

DOWSIL 732 Multi-Purpose Sealant General Industrial Bonding & Sealing Solution Product Introduction of DOWSIL™ 732 Multi-Purpose Sealant Basic Product Attributes DOWSIL™ 732 is a general-purpose, one-part silicone adhesive/sealant with an acetoxy cure system. It cures at room temperature upon exposure to atmospheric moisture. Available in white, black, clear, and aluminum colors, it features a non-sag paste consistency for easy application. Product Overview DOWSIL™ 732 cures

DOWSIL™ 791 Weatherproofing Sealant for Building Facade & Glazing Product Introduction of DOWSIL™ 791 Silicone Weatherproofing Sealant Basic Product Attributes DOWSIL™ 791​ is a one-part, neutral-cure silicone weatherproofing sealant designed for building facades and glazing applications. Product Description DOWSIL™ 791​ offers exceptional weatherability and elasticity, maintaining performance stability within -50°C to 150°C without hardening or cracking. Its ready-to-use

DOWSIL™ SJ-168: High-Performance Neutral Cure Silicone Weatherseal for Non-Structural Core Properties DOWSIL™ SJ-168 is a one-part, neutral cure silicone weatherseal supplied in 300ml cartridges and 590ml foil sausages. It cures by reacting with atmospheric moisture at room temperature, offering a 10-minute work time, 20-minute tack-free time, and 1-2mm/day deep cure rate. Product Overview Engineered for non-structural building joints, it delivers long-term flexible sealing.

DOWSIL 734 Flowable Adhesive Sealant - For Fine Joint Sealing & Field Repairs Product Introduction of DOWSIL™ 734 Flowable Adhesive Sealant Part 1: Basic Product Attributes DOWSIL™ 734​ is a one-component, flowable silicone adhesive sealant with an acetoxy cure system. It cures at room temperature upon exposure to airborne moisture, offering self-leveling properties and ease of application. The cured material forms a tough yet flexible rubber, ideal for fine joint sealing and

Dowsil 527 Silicone Gel Conductive Plastic For Electronic Equipment Coating ​​Product Overview​​ SYLGARD® 527 Silicone Dielectric Gel is a two-part, addition-cure system with a 1:1 mixing ratio. It is characterized by its low viscosity, room temperature or rapid heat cure capabilities, and self-healing properties. This gel is designed to provide long-term sealing against moisture and atmospheric contaminants, making it an excellent choice for applications requiring high

Product Overview​ ​ Dow Corning 3165 is a ​ ​non-flowing, one-part moisture-cure RTV (Room Temperature Vulcanizing) silicone adhesive sealant​ ​ designed for high-performance bonding and sealing applications in electronics and industrial manufacturing. Known for its rapid tack-free cure at room temperature and exceptional flame resistance, this adhesive eliminates the need for mixing or ovens, streamlining production workflows. Its UL 94V-0 flammability rating and strong

Product Overview​ ​ DOWSIL™ SE 9187 L is a ​​single-component, fast-curing thermal adhesive​ ​ available in black, clear/translucent, or white formulations. Key attributes include: ​​Formulation​ ​: Based on polydimethylsiloxane (PDMS) with ultra-low viscosity for easy dispensing. ​​Curing​ ​: Room temperature cure (25°C) in 8–72 hours under 30–80% humidity; accelerated by mild heat (

DOWSIL TC-5622 1Kg Thermal Paste High Thermal Conductivity Silicone Grease For Construction And Transportation​ Basic Product Properties ​​Thermal Conductivity​​: 4.3 W/m·K ​​Color​​: Gray ​​Viscosity​​: 95,000 mPa·s ​​Form​​: Grease-like consistency ​​Key Components​​: Silicone-based grease with high-conductivity metal oxides Product Introduction DOWSIL™ TC-5622 is a high-performance thermal compound based on silicone grease, specifically designed to address thermal

XIAMETER™ PMX-200 Silicone Fluid 50-1000 CSt High Performance Versatile Applications​ Basic Product Attributes XIAMETER™ PMX-200 Silicone Fluid (50-1000 cSt) is a colorless, clear polydimethylsiloxane (PDMS) fluid featuring low surface tension (20.8–21.2 dynes/cm), high dielectric strength (400 V/mil), and exceptional thermal stability (flash point >318°C). With viscosities ranging from 50 to 1000 cSt, it is designed for both personal care and industrial applications. Product

Product Attributes​​ Dowsil TC-5888 is a gray, thixotropic, non-curing thermally conductive compound designed to facilitate efficient heat transfer in electronic applications. This one-part material requires no curing and is formulated without solvents, ensuring long-term stability and ease of application. Special Product Attributes​​ One of the standout features of Dowsil TC-5888 is its thixotropic nature, which results in low slump and allows for precise application. The

SYLGARD™ 170 Silicone Encapsulant Flexible Flame-Retardant Potting Solution for Electronics​​ Basic Properties SYLGARD™ 170 is a two-part, 1:1 mix ratio black silicone elastomer featuring low mixed viscosity (2135 cP), moderate thermal conductivity (0.48 W/mK), and rapid curing at room temperature or with heat acceleration. It is UL 94 V-0 flame-rated and EN45545-2 HL3 certified for railway applications, ideal for electronic potting and encapsulation. Product Description

Product Attributes​ ​ Dowsil DC160 is a two-part, 1:1 mix ratio, dark gray silicone elastomer designed for general-purpose encapsulation. It offers good flowability, moderate thermal conductivity, and UL 94 V-0 flame resistance, making it suitable for a wide range of electrical and electronic applications. The material cures at room temperature or with heat acceleration, providing flexibility in processing. Product Overview​ ​ Dowsil DC160 is a versatile, primerless silicone

Product Attributes​ ​ Dowsil 340 is a white, non-curing, and non-flowing thermally conductive compound developed by Dow Corning. It is designed to provide efficient thermal management for electronic devices by ensuring effective heat transfer from components to heat sinks. Product Description​ ​ Dowsil 340 is a grease-like silicone material that is heavily filled with heat-conductive metal oxides. This unique composition ensures high thermal conductivity, low bleed, and