Manual Valve

Descriptions Of SS304 Piston Pressure Reducing Valve: The direct-acting film-type pressure reducing valve belongs to the pilot SS304 piston pressure reducing valve, consisting of the main valve and the pilot valve. The main valve components include valve seat, main valve disc, piston, cylinder liner, and spring. The pilot valve components include valve seat, valve disc, diaphragm, spring, and adjusting spring. This product is mainly used for pressure regulation in steam

Descriptions And Features Of Dual Plate wafer check valve : The Dual Plate Wafer Check Valve is a compact check valve with a butterfly-shaped double-valve design. The valve flap is composed of two symmetrical valve flaps that rotate around the central axis to achieve the opening and closing function. The valve is connected by a flange connection, occupying a small space and weighing lightly. It is widely used in water treatment systems, HVAC (Heating, Ventilation, and Air

Descriptions And Features Of Manual Wafer butterfly Valve: The Wafer type Butterfly Valve is a type of full opening and full closing device of the pipeline by rotating the butterfly disc. It is mainly composed of the valve body and a disc-shaped butterfly plate, with the butterfly plate installed in the diameter direction of the pipeline. The butterfly plate can rotate 0° - 90° around its axis. When rotated to 90°, the valve is in the fully open state, with low fluid

SONGO A48Y spring fully-opening type flange safety valve : The A48Y safety valve is a spring-type fully-opening safety valve, suitable for steam, air and other media with a working temperature of ≤ 200℃. It is mainly used for overpressure protection of equipment such as boilers and pipelines. This valve is equipped with a wrench structure and a spring mechanism. The pressure can be set by adjusting the screws, and it has a forced opening function to ensure rapid pressure

Descriptions Of EPDM Diaphragm Pressurel Reducing Valve: The diaphragm type pressure reducing valve is a direct acting pressure reducing valve. Its core component is a diaphragm. This diaphragm is used to sense the changes in the outlet pressure and drive the valve core to move, thereby automatically adjusting the valve opening to achieve the purpose of reducing the higher inlet pressure and stabilizing it at a set, lower outlet pressure. Design Features Of Carbon Steel Steam

Descriptions Of Cast Steel API Globe Valve: The globe valve is a commonly used type of shut-off valve. It primarily controls the opening and closing of the fluid and regulates the flow rate by the vertical movement of the valve disc along the centerline of the valve seat. Therefore, it is often used for throttling and precise flow control. Design Features Of Carbon Steel 150LB Flange Globe Valve: 1). The contact surface between the valve disc and the valve seat is small, and

SONGO Double Eccentric Butterfly Valve - LUG Type 150LB High performance offset carbon steel butterfly valve with RPTFE seal and handwheel operation. Benefits of Double Eccentric Butterfly Valve The double eccentric butterfly valve represents an advanced improvement over single eccentric designs. Its structural innovation features a valve stem axis that deviates from both the butterfly plate center and valve body center. This engineering enables rapid separation of the

Descriptions Of WCB API Flange Ball Valve: In the modern industrial sector, particularly in industries such as oil and gas, chemical engineering, power generation, water treatment, and shipbuilding, the pipeline system functions as the circulatory system, undertaking the crucial task of transporting various media (water, steam, oil products, gases, chemicals, etc.). Valves, on the other hand, act as the "switches" and "regulators" that control the flow of these "blood ve

Songo 3Inch ANSI 150LB Cast Iron EPDM PTFE Seal Wafer Lug Manual Butterfly Valve with Handle Product Overview The lug-wafer type butterfly valve is a high-performance valve fixed on pipelines through lug connections. Installed between two pipe flanges using stud bolts, it features a simple structure, compact size, and lightweight design. The valve achieves rapid opening and closing with a 90° rotation, making it ideal for various industrial applications. Key Benefits Simple

Descriptions Of A105 Forged Steel check valve: Forged steel check valves are automatic valves that open and close automatically through the flow of the medium. They are mainly used to prevent the backflow of the medium and protect pumps and driving equipment from reverse rotation damage. The sealing surfaces of the valve body and the valve disc are made of stainless steel by overlay welding. The materials include carbon steel (A105), alloy steel (A182F22), and stainless steel