Bently Nevada

Bently Nevada 330101-00-08-10-02-00 3300 XL 8 mm Proximity Probes Product Overview Parameter Configuration / Value Product Series Bently Nevada 3300 XL 8mm Thread Type 3/8-24 UNF Unthreaded Length (00) 0.0 inches Overall Case Length (08) 0.8 inches Total Length (10) 1.0 meter (approx. 3.3 feet) Connector & Cable (02) Miniature ClickLoc coaxial connector Agency Approval (00) No approvals required Cable Armour Without Armour Operating Temperature -51 °C to +177 °C (-60 °F to

Bently Nevada 330851-06-000-070-50-00-05 3300 XL 25 mm Proximity Probe Specification Item Official Reference Description Base Model (330851) 3300 XL 25 mm Proximity Probe Probe Case Type (06) M39x1.5 metric thread style Unthreaded Length (000) 0 mm unthreaded portion (fully threaded case) Overall Case Length (070) 70 mm total case length Total Length (50) 5.0 metres (16.4 feet) of integrated triaxial cable Armor Option (00) No stainless steel protective armor jacket Agency

Bently Nevada 3500/50E Tachometer Module Category Parameter Official Specification Channels Number of Channels 2 independent, non-isolated channels Input Signal Compatible Transducers Proximity probes or Magnetic pickups Input Signal Range +10.0 V to -24.0 V Measurement Speed Range 0.1 RPM to 99,999 RPM Maximum Frequency 20 kHz Speed Accuracy Under 100 RPM: ± 0.1 RPM 100 to 10,000 RPM: ± 1 RPM Over 10,000 RPM: ± 0.01% of true shaft speed Data Output Recorder Outputs +4 to +20

Bently Nevada 330103-00-06-15-02-CN 3300 XL 8 mm Proximity Probe Applications Steam Turbines : continuous monitoring of radial shaft vibration, axial thrust position, rotor eccentricity — this part basically stays the core use case for 330103-00-06-15-02-CN in turbine protection loops, especially where stability matters under long-running load conditions Gas Turbines : used in real-time protection systems, tied into emergency shutdown logic when vibration or displacement goes

Bently Nevada 84147-01 XDCR I/O Record Terminal Product Overview Optimized Transducer Input/Output (XDCR I/O) Interface Serves as a dedicated hardware interface designed for Bently Nevada 3300 series systems. It seamlessly connects and routes critical sensor signals from proximity probes, velocity, and acceleration transducers directly into the core monitoring modules. Accurate Vibration Signal Termination & Routing Acts as a rugged vibration signal termination block. It

Bently Nevada 330100-90-00 3300 Proximitor Sensor Category Official Technical Requirement / Data Model Number 330100 (Legacy 3300 Proximitor Sensor) Total System Length 9.0 Meters (29.5 Feet) [Option -90] Agency Approval None Required [Option -00] Input Voltage -17.5 Vdc to -26 Vdc (Standard -24 Vdc supply) Current Consumption 12 mA maximum (nominal) Incremental Scale Factor 7.87 V/mm (200 mV/mil) ± 6.5% Linear Range 2.0 mm (80 mils), typically 0.25 to 2.3 mm Standard Target

Bently Nevada 3500/25 149369-01 Enhanced Keyphasor Module Category Specification Details Product Name 3500/25 Enhanced Keyphasor Module Main Board Part Number 149369-01 (Replaces 125792-01) Module Type Half-height (Occupies 1 horizontal slot) Number of Channels 2 Channels per module Input Sensors Proximitor Sensors or Magnetic Pickups Input Signal Range 0 to -24 Vdc or +12.0 Vdc to -12.0 Vdc Input Impedance 21.8 kΩ (Typical) Frequency Range 1 RPM to 120,000 RPM (0.017 Hz to

Bently Nevada 330104-00-11-10-01-00 3300 XL 8 mm Proximity Probe Part Number : 330104-00-11-10-01-00 Unthreaded Length: 0 mm Overall Case Length: 110 mm Total Cable Length: 1.0 metre (3.3 feet) Connector Type: Miniature coaxial ClickLoc connector with connector protector Cable Type: Standard cable with stainless steel integral armor Agency Approvals: None required (Standard version) Linear Range: 2.0 mm (80 mils), starting at approximately 0.25 mm (10 mils) from the probe tip