Foxboro Module

The P0500RY serves as the primary physical-layer conduit within the Foxboro I/A Series I/O subsystem. It is the dedicated link engineered to bridge the gap between high-density Field Bus Modules (FBM4, FBM39, and FBM44) and their respective Termination Assemblies (TA). In a DCS environment where signal density is high and cabinet space is at a premium, this cable ensures a clean, deterministic path for process data, eliminating the "spaghetti wiring" often associated with

The FBI10E Fieldbus Isolator enables the Control Processor 60 (CP60) to communicate seamlessly with Y-Module form factor Fieldbus Modules (FBM01, FBM02, etc.). It performs signal conversion between the 10 Mbps Ethernet Fieldbus signals used by the CP60 and the HDLC signals required by the Y-Module form factor FBMs. The FBI10E supports communication with up to 24 FBMs while providing galvanic isolation between the Ethernet Fieldbus and the connected FBMs, ensuring reliable and

Input Frequency Range 47 to 63 Hz Input Voltage Range 18 to 35 V dc, 24 V dc nominal Input Current 19.5 A at 24 V dc input Efficiency (At Maximum Output Power) 85% typical at 24 V dc input Input Power 468 W at 24 V dc input typical Output Voltage 24.0 V dc, ±0.2 V dc nominal factory setting Voltage Line Regulation 2.0% of Vout Voltage Load Regulation 2.0% of Vout Ripple and Noise at 20 MHz 100 mV (peak-to-peak), 10 mV (RMS maximum) Temperature Coefficient 0.025% per °C

FOXBORO FBM237 P0914XS Ready Output Module Product Description FOXBORO DCS 0 to 20 mA Output Module (Redundant Ready) Output Load: 750 Ω maximum Output Processing Delay: 30 ms maximum Output Range (each channel): 0 to 20.4 mA dc Communication: Via module fieldbus with associated FCM or FCP Compatible with: FBM203/204/217/231, FEM100 (Scarcity), FCP240/270 (CPU), P0916 (Order number) Belongs to Invensys Products line, compatible with CP30A/40A/30B/40B (Power card module)