Standard Hose

En853 2sn Wire Braided Hydraulic Hose Industrial Hydraulic Hose Hydraulic Hose product introduction Internal hose is made of synthetic rubber, extruded whole without joints and of uniform thickness. Reinforcement consists of 2 layers of steel wire braid. Covering is anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. For fittings, the ferrule is No‑skive Type DPF2T and the insert is DPX2XX (X can be chosen). This is a BS EN 853 2SN fluid

Bs En 1360 1w Professional Wire Braided Fluid Hose Fluid Hose product introduction Internal hose is made of synthetic rubber resistant to petrol and diesel fuel, extruded whole without joints and with uniform thickness, featuring anti-static electricity with R < 1MΩ. The reinforcement consists of 1 layer of steel wire braid. The covering is anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions, also with anti-static electricity R < 1 MΩ. The hose

SAE 100R2AT Hydraulic Hose | 2-layers Steel Wire Braided Hydraulic Hose product introduction The internal hose is made of synthetic rubber, extruded whole without joints and of uniform thickness. It is reinforced with 2 layers of steel wire braid, and the covering is anti-abrasive synthetic rubber resistant to oils, fuels and atmospheric conditions. For fittings, the ferrule is No‑skive Type DPF2T and the insert is DPX2XX (X can be chosen). The product is approved with MSHA,

SAE J517 R13 Standard Hose Wire Spiral Hydraulic Hose Hydraulic Hose Product Introduction The internal hose is made of synthetic rubber, extruded integrally without joints and with uniform thickness; its reinforcement structure consists of 4 layers of high tensile steel wire spiral for sizes up to 1', and 6 layers of spiral for sizes from 1-1/4' to 2'. The outer covering is anti-abrasive synthetic rubber that is resistant to oils, fuels and atmospheric conditions. For

SAE J517 R17 Standard Hose Wire Braided Hydraulic Hose Hydraulic Hose Product Introduction This is an SAE J517 R17 fluid hydraulic hose. Its internal hose is made of synthetic rubber, extruded integrally without joints and with uniform thickness. For reinforcement, it adopts 1 layer of high tensile steel wire braid for sizes up to 1/2", and 2 layers of high tensile steel wire braid for sizes from 5/8" onwards. The outer covering is anti-abrasive synthetic rubber, which is

SAE J517 R16 Standard Hose Wire Braided Hydraulic Hose Hydraulic Hose Product Introduction This is an SAE J517 R16 fluid hydraulic hose, with its internal hose made of synthetic rubber that is extruded integrally without joints and of uniform thickness. Its reinforcement structure consists of 2 layers of steel wire braid, and the outer covering is anti-abrasive synthetic rubber which is resistant to oils, fuels and atmospheric conditions. For fittings, it is equipped with no

ISO 11237 R19 Standard Hose Wire Braided Hydraulic Hose Hydraulic Hose Standard Hose This is an ISO 11237 R19 fluid hydraulic hose, with its internal hose made of synthetic rubber that is extruded integrally without joints and of uniform thickness. Its reinforcement structure consists of 2 layers of steel wire braid, and the outer covering is anti-abrasive synthetic rubber which is resistant to oils, fuels and atmospheric conditions. For fittings, it is equipped with no-skive

EN856 4SH Steel Spiral Standard Hose SAE 100R12 Wrapped Cover Standard Hose Product Name Internal hose: synthetic rubber, extruded whole without joints, of uniform thickness Reinforcement: 4 layers of steel wire spiral Cover: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions Working pressure: 165–445 Bar / 2393–6453 PSI Impulse cycles: ≥ 400,000 Times Temperature: -40℃ to +100℃ (intermittent 120℃) Standard Hose Specification Part Number Hose

Bs En 1360 2t Textile Braided Fluid Hose High-performance Fluid Hose product introduction Internal hose is made of synthetic rubber resistant to petrol and diesel fuel, extruded whole without joints and with uniform thickness, anti-static with R < 1MΩ. Reinforcement consists of 2 layers of textile braid. Covering is anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions, also anti-static with R < 1 MΩ. Fittings include DPF2T no-skive ferrule and

Sae R7 Standard Hose Black Color Polyester Elastomer standard Hose product introduction The internal hose is made of PA (polyamide), with a reinforcement structure consisting of 1 layer of textile braid and a black PU (Polyurethane) covering. For its fittings, the ferrule adopts the No-skive Type DPFR7, and the insert is DPXR7-XX (XX is selectable). This hose is an SAE J517 R7 fluid hydraulic hose, approved by multiple certificates including MSHA, BV, GOST, IATF 16949, ISO

TWIN HOSE (Smooth Cover) : 2SN / R2AT Applicable Specs: ■ DIN EN 857 2SC ■ ISO 11237-1 2SC ■ EN 1804-3 ■ ISO 1307 ■ ISO 6805 Applications: Hydraulic Hose specification Part Number Hose Size I.D. R.O.D. O.D. Operating Pressure Burst Pressure Bend Radius Weight Length Per PCS Ferrule I.D. Dash Size mm inch mm mm mm bar psi bar psi mm kgs/m meter DME Code TWIN 221102-06 -04 6.4 1/4'' 6.1-6.9 10.6-11.7 14.2 MAX. 400 5800 1600 23200 75 0.290 50/100 DPF2T-04 TWIN 221102-08 -05 8.0

TWIN HOSE (Smooth Cover) : 2SNK / 2SC+ Applicable Specs: ■ ISO 18752 2BC/2CC ■ DIN EN 857 2SC+-Exceeds EN857 2SC ■ DIN EN 853 2SNK-Exceeds EN853 2SN ■ ISO 1436:2009 ■ TS 6387 EN857 2SC ■ ISO 1307 ■ ISO 6805 ■ EN 13463-1 Applications: Hydraulic Hose specification Part Number Hose Size I.D. R.O.D. O.D. Operating Pressure Burst Pressure Bend Radius Weight Length Per PCS Ferrule I.D. Dash Size mm inch mm mm mm bar psi bar psi mm kgs/m meter DMECode TWIN 221102-06 -04 6.4 1/4'' 6

BS EN 857 2SC Wire Braided Hydraulic Hose Applicable Specs: DIN EN 857 2SCISO 11237-1 2SCEN 1804-3ISO 1307ISO 6805 Applications: Hydraulic Hose specification Part Number Hose Size I.D. R.O.D. O.D. Operating Pressure Burst Pressure Bend Radius Weight Length Per PCS Ferrule I.D. Dash Size mm inch mm mm mm bar psi bar psi mm kgs/m meter DME Code DEF 211122-06 -04 6.4 1/4'' 6.1-6.9 10.6-11.7 14.2 MAX. 400 5800 1600 23200 75 0.290 50/100 DPF2T-04 DEF 211122-08 -05 8.0 5/16'' 7.7-8

3TE ( High Pressure ) Textile Braided Hydraulic Hose Applicable Specs: ■ DIN EN 854 3TE ■ DIN 20021 3TE ■ TS 6388 EN 854 TIP 3TE ■ ISO 4079-3TE ■ ISO 1307 Applications: Hydraulic Hose specification Part Number Hose Size I . D. R. 0 . D . 0.D. Operating Pressure B urst Pressure Bend R adius Weight Length Per PCS Ferrule I. D. D ash Si ze mm inch mm mm mm bar p si bar p si mm kgs/ m meter DALE Code JDE 211103-05(3TE) -3 4.8 3/ 1 6 " 4.4-5.2 / 11.0-13.6 160 2320 640 9280 40 - 50

BS EN 856 4SH Wire Spiral Hydraulic Hose Applicable Specs: DIN 20023 PART 2 TYPE 4SHTS 10548 / PG-G-32010ISO 1307ISO 8030 / EN 1804-3 / ISO 6805 ISO 4413ISO 3862 4SH Applications: Hydraulic Hose specification Part Number Hose Size I.D. R.O.D. O.D. Operating Pressure Burst Pressure Bend Radius Weight Length Per PCS Ferrule I.D. Dash Size mm inch mm mm mm bar psi bar psi mm kgs/m meter DME Code JDE 211114-19 -12 19.0 3/4'' 18.6-19.8 27.6-29.2 31.4-33.0 420 6090 1680 24360 280 1

BS EN 854 2TE Textile Braided Hydraulic Hose Applicable Specs: ■ ISO 18752 1AC/2AC/4CC Applications: Hydraulic Hose specification Part Number Hose Size I.D. R.O.D. O.D. Operating Pressure Burst Pressure Bend Radius Weight Length Per PCS Ferrule I.D. Dash Size mm inch mm mm mm bar psi bar psi mm kgs/m meter DME Code JDE 211103-05 -03 4.8 3/16" 4.4-5.2 / 11.0-12.6 80 1160 320 4640 25 0.200 50/100 PUSH-ON-2TE-03 JDE 211103-06 -04 6.4 1/4'' 5.9-6.9 / 12.6-14.2 75 1087.5 300 4350

BS EN 853 2ST Wire Braided Hydraulic Hose Applicable Specs: ■ ISO 18752 1AC/2AC/4CC Applications: Hydraulic Hose specification Part Number Hose Size I.D. R.O.D. O.D. Operating Pressure Burst Pressure Bend Radius Weight Length Per PCS Ferrule I.D. Dash Size mm inch mm mm mm bar psi bar psi mm kgs/m meter DME Code JDE 211112-05 -03 4.8 3/16'' 4.6-5.4 10.6-11.6 15.1-16.7 415 6017.5 1660 24070 90 0.340 50/100 DPF2T-03 JDE 211112-06 -04 6.4 1/4'' 6.2-7.0 12.1-13.3 16.7-18.3 400

BS EN 854 1TE Textile Braided Hydraulic Hose Applicable Specs: ■ ISO 18752 1AC/2AC/4CC Applications: Hydraulic Hose specification Part Number Hose Size I.D. R.O.D. O.D. Operating Pressure Burst Pressure Bend Radius Weight Length Per PCS Ferrule I.D. Dash Size mm inch mm mm mm bar psi bar psi mm kgs/m meter DME Code JDE 211106-05 -03 4.8 3/16'' 4.4-5.2 / 10.0-11.6 35 507.5 140 2030 50 0.100 50/100 PUSH-ON-R6/1TE-03 JDE 211106-06 -04 6.4 1/4'' 5.9-6.9 / 11.6-13.5 28 406 112

ISO 18752 MatrixFlex 4K Constant Working Pressure Hose Applicable Specs: ■ ISO 18752 1AC/2AC/4CC Applications: Hydraulic Hose specification Part Number Hose Size I.D. R.O.D. O.D. Operating Pressure Burst Pressure Bend Radius Weight ISO 18752 Ferrule I.D. Dash Size mm inch mm mm mm bar psi bar psi mm kgs/m Type DME Code MatrixFlex-4K-06 -04 6.4 1/4" 6.1-6.9 11.3 13.2 280 4000 1120 16000 75 0.29 2AC DPF2T-04 MatrixFlex-4K-08 -05 8.0 5/16" 7.7-8.5 13.1 14.7 280 4000 1120 16000

ISO 18752 MatrixFlex 3K Constant Working Pressure Hose Applicable Specs: ■ ISO 18752 1AC/2AC/4CC Applications: Hydraulic Hose specification Part Number Hose Size I.D. R.O.D. O.D. Operating Pressure Burst Pressure Bend Radius Weight ISO 18752 Ferrule I.D. Dash Size mm inch mm mm mm bar psi bar psi mm kgs/m Type DME Code MatrixFlex-3K-06 -04 6.4 1/4" 6.1-6.9 11.1 12.8 210 3000 840 12000 45 0.19 1AC DPF2T-04 MatrixFlex-3K-08 -05 8.0 5/16" 7.7-8.5 12.9 14.4 210 3000 840 12000 50