Dimming Actuator

5WG1592-8AB01 M 592/01 KNX Mounting Housing 1 Slot M 592/01 is a mechanical accessory mounting housing that provides a single insertion slot for flush-mount actuators or dimmers. This housing enables compact UP devices to be used outside wall boxes, such as in distribution enclosures or decentralized locations near loads. Product Overview This mounting housing allows electricians to protect and access modules in various installation scenarios. It's ideal for situations where

5WG1528-1CB01 N 528C01 KNX Universal Dimming Actuator 2x150VA 120V UL Listed LED DIN Rail The N 528C01 (5WG1528-1CB01) is a 120V North American edition two-channel universal dimmer designed for KNX building automation systems. UL listed for use in US and Canadian installations requiring recognized testing laboratory certification. Product Overview This 120V North American edition universal dimmer follows the same advanced concept as the European model, featuring automatic

5WG1526-1EB02 N 526E02 KNX 8-Channel Switch/Dim Actuator 8x230V 16A 1-10V UL 8MW DIN Rail A versatile 8-channel KNX actuator combining switching and analog dimming capabilities in a single DIN rail device. Product Overview The N 526E02 is a proven solution for control panels requiring both switching and analog dimming functions. This 8-module DIN rail device features eight independent groups for fluorescent lamps or LED luminaires, with 16A relay outputs for mains switching

5WG1525-1DB11 N 525D11 KNX Switch/Dim Actuator 2x DALI Broadcast DALI-2 20 ECG per Channel Product Overview The N 525D11 occupies a strategic middle ground between basic switching actuators and full KNX/DALI gateways. Featuring two DALI outputs operating in broadcast mode, this DALI-2 certified device enables simultaneous control of all luminaires on a line while supporting color temperature adjustment. For zone-based lighting control applications, this eliminates the need

5WG1141-1AB32 N 141/32 KNX DALI Gateway Twin DALI-2 2 Lines 128 ECG Tunable White RGB The N 141/32 is the twin-output member of the new DALI-2 gateway generation, featuring two fully separate DALI lines managed from a single rail device. Certified as a DALI-2 multi-master application controller, it supports both classic DALI ballasts and DALI-2 sensors and color-capable luminaires. Product Overview The two outputs can be engineered independently, allowing one device to serve

5WG1141-1AB31 N 141/31 KNX DALI Gateway Twin 2 Channel 64 ECG 32 Groups 128 Lights The N 141/31 (5WG1141-1AB31) is a KNX/DALI Gateway Twin that turns a KNX installation into a DALI lighting control system without any extra interface hardware. Product Overview The N 141/31 (5WG1141-1AB31) is a KNX/DALI Gateway Twin that transforms a KNX installation into a comprehensive DALI lighting control system without requiring additional interface hardware. Two independent DALI outputs

5WG1141-1AB14 N 141/14 KNX DALI Gateway DALI-2 Single Line 64 ECG Tunable White HCL Product Overview The N 141/14 (5WG1141-1AB14) is the single-line member of the new DALI-2 gateway family. It is a certified DALI-2 multi-master application controller that works with modern DALI-2 input devices and color-capable luminaires, rather than only with classic DALI ballasts. One DALI output carries up to 64 full DALI channels, and the device includes an IP interface for significantly

5WG1526-4DB23 RL 526D23 KNX Switch/Dim Actuator 2x AC 230V 6A 1-10V AP118 Room Box Module Product Overview The RL 526D23 (5WG1526-4DB23) is the room-side counterpart of the junction-box actuators. Rather than being screwed into a ceiling box, it is a plug-in module that slides into an AP 118 automation module box or an AP 641 room automation box, which is where room lighting and shading hardware are concentrated in offices and hotel rooms. Its output chain is deliberately

AA/S4.1.2 ABB Analog Actuator 4-Fold MDRC for 0-10V and 4-20mA Standard Industrial Level Control Signal Module Product Overview The AA/S 4.1.2 is a professional-grade component of the ABB i-bus® KNX building automation system, engineered to deliver exceptional reliability, energy efficiency, and operational scalability for modern intelligent infrastructure. As part of the globally recognized Dimming Actuator range, this device represents the integration of advanced engineerin

UD/S2.315.2.1 ABB Universal Dimming Actuator 2-Fold 315 VA Optimized for LEDi and Conventional Loads KNX Product Overview The UD/S 2.315.2.1 is a high-performance modular component of the ABB i-bus® KNX building automation system, designed to provide exceptional reliability, energy efficiency, and operational scalability for modern intelligent infrastructure. As part of the globally recognized Dimming Actuator range, this device represents the integration of advanced

SD/S 4.16.1 ABB i-bus KNX Switch and Dim Actuator 4-Fold 16 A 1-10V MDRC Lighting Unit with Free Relays Product Overview The SD/S 4.16.1 from the ABB i-bus KNX range is a four-fold switch and dim actuator designed for modular DIN-rail mounting (MDRC). This advanced lighting control solution features four independent channels, each combining a potential-free relay with a 1-10 V interface. Each channel can individually switch and dim separate groups of luminaires with

SD/S 2.16.1 ABB i-bus KNX Switch and Dim Actuator 2-Fold 16 A 1-10V MDRC Relay Module for Ballast Groups Product Overview The ABB i-bus KNX SD/S 2.16.1 is a two-fold switch and dim actuator in modular DIN-rail design (MDRC). Every channel pairs a potential-free 16 A relay with a 1-10 V control output, enabling lighting groups with electronic ballasts or 1-10 V LED drivers to be switched on/off and dimmed from 0 to 100% via ABB i-bus KNX or manual operation at the device.

LR/S 4.16.1 ABB i-bus KNX Light Controller 4-Fold 1-10V 16 A MDRC Daylight Harvesting Office Module Product Overview The ABB i-bus KNX LR/S 4.16.1 is a four-fold light controller in modular DIN-rail design (MDRC) for switching and dimming four independent groups of luminaires with electronic ballasts and 1-10 V control inputs. In combination with the light sensor LF/U 2.1 it operates as a 4-fold light controller for constant light control. Order code: 2CDG110088R0011 Color:

LR/S 2.16.1 ABB i-bus KNX Light Controller 2-Fold 1-10V 16 A MDRC Constant Illumination Module Product Overview The ABB i-bus KNX LR/S 2.16.1 is a two-fold light controller designed for modular DIN-rail mounting (MDRC). This advanced device switches and dims two independent groups of luminaires equipped with electronic ballasts and 1-10 V control inputs. The integrated constant light control function enables continuous comparison of measured room brightness with setpoint

LF/U 2.1 ABB i-bus KNX Light Sensor Flush-Mount 200-3000 lx Brightness Probe for Constant Light Control Product Overview The ABB i-bus KNX LF/U 2.1 is a flush-mounted light sensor that measures illuminance levels in rooms and provides measured values to the KNX lighting control system. As the sensing element of ABB's constant light control concept, it works with light controllers LR/S 2.16.1, LR/S 4.16.1, or DALI light controller DLR/S with light controller module LR/M1.6.2

MTN6710-1102 Schneider Universal Dimming Module 2x10A KNX Actuator The Schneider Electric MTN6710-1102 Universal Dimming Module is a versatile KNX actuator designed for comprehensive lighting control applications. This advanced module provides two independent 10A dimming channels supporting multiple dimming technologies including leading-edge, trailing-edge, and 1-10V control for complete lighting management solutions. Technical Specifications Feature Detail Dimming Channels

SD/S 8.16.1 ABB i-bus KNX Switch and Dim Actuator 8-Fold 16 A 1-10V MDRC High-Density Office Module Product Overview The ABB i-bus KNX SD/S 8.16.1 is the highest-density switch and dim actuator of the i-bus 1-10 V family. Eight independent channels are packed into a single modular DIN-rail device (MDRC), with each channel featuring a potential-free 16 A relay and a 1-10 V control output for electronic ballasts. Luminaires can be switched and dimmed over the bus or manually,

AA/S 2.1.2 ABB i-bus KNX Analogue Actuator 2-Fold Surface-Mount 0-10V Bus-Powered Valve/Damper Module Product Overview The ABB i-bus KNX AA/S 2.1.2 is a two-channel analogue actuator from the i-bus output range, supplied as a complete device in a surface-mounted housing (SM). It converts KNX telegrams into 0...10 V DC control signals, forming the interface between the bus system and continuous actuators in HVAC plant. Since the unit is powered directly from the KNX line, no

L5112D10UA Schneider Clipsal C-Bus Architectural Dimmer 12 Channel 10A Universal Phase Control No RCD Unit The L5112D10UA is a twelve channel architectural dimmer from the Clipsal C-Bus range, rated at ten amperes per channel, and it is catalogued by Clipsal as a universal dimmer rather than as a leading edge unit. Product Overview That distinction matters more than the point count, because a universal output can operate either as a leading edge or as a trailing edge dimmer

L5106D10LP Schneider Clipsal C-Bus Professional Dimmer Six Channel 10A Per Channel Leading Edge No RCD Product Overview The L5106D10LP is a six-channel professional dimmer from the Clipsal C-Bus range, designed for commercial installations. Rated at ten amperes per channel with leading edge phase control, this dimmer is engineered to handle large incandescent and halogen loads efficiently. The six-channel configuration provides optimal load distribution for substantial