Helipad Lights

Heliport Light Radio Controller Best Communicator for Pilot and Ground AH-HP/G-VHF Heliport Light Radio Controller permits pilots to turn on airfield lights utilizing their existing the aircraft VHF 118-137 MHZ band radio when flying to an airport or heliport. Compliance ICAO and FAA regulations and CAP437 (offshore helipads) Features 1.Low maintenance costs 2. Protected from input transients, output overload, over-voltage, and over temperature conditions. 3. System may be

AH-HP-R2 Airport Rotating Beacon The heliport/Airport beacon shall be located on or adjacent to the heliport preferably at an elevated position and so that it does not dazzle a pilot at short range. This Rotated beacons is for night operation as identification and location markers for airports. Compliance FAA L-801, L-802 150/5345-12F ICAO Annex 14 Volume I 5.3.3 Features LED as light source, ≥100,000 hour typical lamp life. Two head, Two emitting color No maintenance All

AH-PA-EMC Portable Airfield Light Steady 7.4V/20AH 24hours working AH-PA-EMC Portable Airfield Light is specially used on permanent airport/heliport where cable power is not convenient or temporary helipad, especially for medivac and other emergency situations. Compliance ICAO Annex 14 Volume ǁ Heliports 5.3.7.3 ICAO Annex 14 Volume I Appendix 1, fig. A1-1 Features Electrical Ultra High intensity LED as light source saving power consumption and maintenance, 95% less power

Helipad Windcone Description This product is used for indicating final approach and taking off wind direction. According to ICAO requirement, every helipad field must have at least one wind cone. Installation position must be not interfered by around object and airflow formed by helipad wing and make pilot recognize wind cone at 200meters clearly. AH-HP/W illumination wind cone is one sign for all kinds of airports and helipad fields and can work all day. Product standard is

AH-HP-CHAPI LED CHAPI Heliport Approach Path Indicators The LED CHAPI Heliport Approach Path Indicators (CHAPI) uses LED technology to provide the pilot with safe and accurate glide slope on final approach to the helipad. A set of two LED CHAPI Light Housing Assemblies (LHAs) are seen by the pilot in combinations of white, green and red to indicate a path that is too high, too low or within the 6° ±0°15' glide slope. Solar power system is optional for CHAPI. CHAPI Visual

LED Precision Approach Path Indicator Heliport PAPI light helipad landing lights indicators The LED Precision Approach Path Indicator short for PAPI is used to guide helicopter to approach the right runway at an appropriate altitude. There are two Colors- red, white, which to show two wide horizontal angles in different color. The PAPI is projected in fan shaped array into the incoming flight pattern. Solar power system is optional for PAPI. Suitable for place farway from

AH-HP-I-TLOF(L) LED Heliport Touchdown and Lift-off Area Lighting Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. A TLOF lighting system shall be provided at a heliport intended for use at night. TLOF perimeter lights shall be placed along the edge of the area designated for use as the TLOF or within a distance of 1.5 m from the edge. The TLOF perimeter lights shall be fixed omnidirecti

AH-HP-CHAPI LED CHAPI Heliport Approach Path Indicators The LED CHAPI Heliport Approach Path Indicators (CHAPI) uses LED technology to provide the pilot with safe and accurate glide slope on final approach to the helipad. A set of two LED CHAPI Light Housing Assemblies (LHAs) are seen by the pilot in combinations of white, green and red to indicate a path that is too high, too low or within the 6° ±0°15' glide slope. CHAPI Visual Indication: Compliance ICAO Annex 14 Volume I

AH-HP/D LED Obstruction Light 20 Watt Heliport Directional Arrow For Helideck AH-HP/D Heliport Directional Arrow has double functions. Floodlights on middle is used for illumination. Top perimeter light mark the edge of the final approach and take-off area. . Compliance l ICAO Annex 14 Volume ǁ Heliports 5.3. l FAA AC 150/5390-2B Heliport Design Guide l CAP 437 Datasheet: AH-HP-D Heliport Directional Arrow.pdf SPECIFICATIONS AH-HP/D Heliport Directional Arrow Light Characteri

The LED Precision Approach Path Indicator (PAPI) is used to guide aircraft to approach the runway at an appropriate altitude. It is specially designed to accommodate the helicopter's steep angles of descent and deliberate speeds. There are two Colors which to show two wide horizontal beams in different colored light. Compliance ICAO Annex 14 Volume I 6th Edition dated 2013 clauses, 5.3.5.28– 5.3.5.40, Figure A2-23 Appendix 1, 2.1.1 Electrical LED as light source saving power

AH-HP-I-TLOF(L) LED Heliport Touchdown and Lift-off Area Lighting Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. A TLOF lighting system shall be provided at a heliport intended for use at night. TLOF perimeter lights shall be placed along the edge of the area designated for use as the TLOF or within a distance of 1.5 m from the edge. The TLOF perimeter lights shall be fixed omnidirecti

Product Description Specification SPECIFICATIONS AH-LS-P3 LED Marine Navigation Lanterns Light Characteristics Light Source Ultra high intensity LED Available Colors Red, Green, Yellow, White, Blue Visible Range(NM) Up to 16NM (AT@0.74) Horizontal Output(degrees) 360 Vertical Divergence(degrees) ≥10°or ≥5° Flash Characteristics Adjustable 366 light characters(others optional) Operation Mode Dusk-to-dawn Automatically (Built-in photocell) LED Life Experience(hours) >100,000

Product Description ●Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. ●It could be used as Aiming point light, perimeter light of FATO(Final approach and take-off areas), TLOF (Touchdown and lift-off areas), taxiway, Flight path alignment guidance lighting, etc. The emitting color is green or yellow or white or blue. ●8inch International standard mounting for aerodrome inset light.

Portable Helipad Landing Lights Portable Airfiled Lighting System PALS Infrared LED Wireless Remote Control AH-PA-EMC Portable Airfield Lighting System is specially used on permanent airport/heliport where cable power is not convenient or temporary helipad, especially for medivac and other emergency situations. Highly portable and easy to install the portable landing zone kit provides temporary illumination of any military or civilian helicopter landing surface or airfield.

Helipad Landing Lights LED Visual Approach Slope Indicator Heliport VASI heliport Light The LED Visual Approach Slope Indicator (VASI) is used to guide aircraft to approach the runway at an appropriate altitude. It is specially designed to accommodate the helicopter's steep angles of descent and deliberate speeds. There are three Colors which to show three wide horizontal beams in different colored light. And it is projected in fan shaped array into the incoming flight

LED Precision Approach Path Indicator Heliport PAPI light helipad landing lights indicators The LED Precision Approach Path Indicator (PAPI) is used to guide aircraft to approach the runway at an appropriate altitude. It is specially designed to accommodate the helicopter's steep angles of descent and deliberate speeds. There are two Colors which to show two wide horizontal beams in different colored light. And it is projected in fan shaped array into the incoming flight

Helipad Landing Lights solar powered portable heliport beacon solar airfield lights wireless remote control Application Helipad/Heliport/Helideck/Airport A heliport beacon should be provided at a heliport where long-range visual guidance is considered necessary and is not provided by other visual means; or identification of the heliport is difficult due to surrounding lights. AH-SA-HB flashes white color 4 times/0.8second and stop for 1.2s, then start new circle for 2seconds

A heliport beacon should be provided at a heliport where long-range visual guidance is considered necessary and is not provided by other visual means; or identification of the heliport is difficult due to surrounding lights. The heliport beacon shall be located on or adjacent to the heliport preferably at an elevated position and so that it does not dazzle a pilot at short range. AH-HP-B2 flashes white color 4 times/0.8second and stop for 1.2s, then start new circle for

Specification AH-HP-I Heliport Inset Steady - burning Light Green White Yellow Aiming Point Light Heliport light Helipad lighting Inset Touchdown and Lift-off Area Light compliant with ICAO,FAA,CAAC Applications Scope of Application This product is used for shining Omnidirectional white or green or yellow light at night or in the daytime with poor visibility to provide good visibility and circling guidance. Product Description Parameter Description Parameter Mode AH-HP-I

ICAO Annex 14 Heliport Rotated Beacon Helipad Rotating Beacon Airport Beacon 2-color heliport rotated beacon The heliport beacon shall be located on or adjacent to the heliport preferably at an elevated position and so that it does not dazzle a pilot at short range. This Rotated beacon is for night operation as identification and location markers for airports. Compliance FAA L-801A ICAO Annex 14 Volume I 5.3.3 Features 100,000 hour typical lamp life One white color, another