12V 65AH Long Life Deep Cycle Lead Acid Battery , Sla Batteries

Specifications:

FEATURES

● Designed life for floating charge is 5 years (20℃);

● Design with flat plate, GEL electrolyte and AGM separator technology;

● GEL electrolyte inside of battery keeps uniformity condition, battery is with excellent cycle life;

● GEL electrolyte has huge thermal capacity, thermal runaway phenomena never occur;

● High strength ABS material for container & lid;

● Wide temperature scope of application(-15~45℃).

Best temperature of application(20±5℃);

● No leaking, safe and reliable;

● Standing or lying down for using, convenient to

transport and install;

● Low self-discharge rate.

CHARGE

STORAGE

● Batteries should be stored in dry and clean warehouse which has good air exchange system. Batteries should avoid direct sunlight. Batteries should not be near to heat (such as radiator, the distance should more than 1m). Batteries should avoid any toxic gas and organic solvent.

● When the ambient temperature is less than 25℃, the longest storage life is 6 months. If ambient temperature is higher, the longest storage life varies as specified in below chart.

  ●Batteries should be recharged within the storage life or before using.

  Charging methods: maximum charging current 57.5A, constant voltage 2.45±0.05V/cell (25℃);

  Charging time: 15~20h; Temperature compensation coefficient: -5mV/℃/cell.

Applications:

1) UPS (uninterruptible power supply)

2) Telecommunication centre and based station

3) Medical equipment and system

4) Large-scale computer backup power

5) Solar or wind energy storage device

6) Emergency Lighting system

7) Alarm and security system

8) Other large energy storage device

9) Electric bike

10) Starting batteries of auto/automobile, and other vehicles.

TECHNICAL FEATURES:

      • Sealed Construction

        The unique construction and sealing techniques of the battery guarantee leak proof operation in any         position with no adverse effect to capacity or service life.

      • Electrolyte Suspension System

        All batteries utilize an electrolyte suspension system consisting of a high porosity, glass fiber material        which in conjunction with plates, totally absorb and contain the electrolyte.

      • Gas Recombination

     CGB batteries incorporate a built-in design that controls gas generation and induces recombination of       more than 99% of gases generated during float or cyclic usage.

     • Maintenance Free Operation

     There is no need to check specific gravity of the electrolyte or add water to batteries during float                service life. In fact, there is no provision for this type of maintenance.

      • Low Pressure Valve Regulated System..

      All batteries are equipped with safety release valves, designed to operate between 1.5 and 6 psi (10-         40kPa) and automatically reseal. Hence, there is never an excessive accumulation of gas within the           battery.

     • Heavy Duty Grids

     Heavy duty lead calcium tin alloy grids provide an extra margin of performance and service life in either      float or cyclic applications.

    • Cyclic Service Life

    More that 600 discharge/recharge cycles can be realized from CGB CB and HR batteries, dependent         on the average depth of discharge.

   • Self Discharge - Shelf Life

   The self discharge rate at room temperature is approximately 3% of rated capacity per month.

   • Operating Temperature

   CGB Batteries may be operated over a broad range of ambient temperatures.

    • Deep Discharge Recovery

    The batteries recover their capacities even after repeated deep discharges.

FOQ

    Q1: What’s your payment terms?

          A1:We accepted T/T,L/C

Q2: OEM Service
A2: We can print your LOGO on Battery case , If your quantities reached 50PCS , We also can printing your LOGO on Battery carton.

Q3:How long is your delivery time?
A3: It is about 30 days.