Medical Equipment 12V 2.3AH CB1223V VRLA Rechargeable Battery 182 * 24 * 61mm
Medical Equpment 12V 2.3AH CB1223V VRLA Rechargable ABS Plastic Battery
Description
3-5 years float life at 20°C
Up to 5 years design life at renewable energy applications
Wide operating temperature range from -15°C to 45°C
Nano gel electrolyte eliminate the acid stratification and prolong cycle life
Round trip efficiency as high as 85%.
Thick positive flat plate design with high Tin low Calcium alloy and high density
paste
Low self-discharge rate and long shelf life (9 months at 25°C)
Excellent deep discharge recovery capability
Maintenance free, no need add water any more when use it.
Completely sealed(all gases recycled internally), no acid leak.
Specifications
| Nominal Voltage | 12V | Capacity | C20 | 2Ah(10.5V, at 25℃) | |
| Nominal Capacity (C20) | 2Ah(10.5V,at 25℃) | C10 | 1.8Ah(10.5V, at 25℃) | ||
| Dimension | Length 182mm | C3 | 1.5Ah(10.5V, at 25℃) | ||
| Width 24mm | C1 | 1.2Ah(10.2V, at 25℃) | |||
| Height 61mm | Internal Resistance | Approx. 70 mΩ (25℃) | |||
| Total Height 61mm | Max Short-duration Discharge Current | 60A(25℃) | |||
| Weight | Approx. 0.78kg | Terminal | PC-04 | ||
CHARGE
| Using Mode | Charging Voltage | Temperature Compensation | Max Charging Current |
| Standby Use | 2.275±0.025V/cell (25℃) | -3.3mV/℃/cell | 0.6A |
| Cyclic Use | 2.45±0.05V/cell (25℃) | -5mV/℃/cell |
Application
Medical Equipment
Alarm System
UPS
Cable Television
Power tools
Communication Equipment
Control Equipment
Emergency Power System
Toys
Security System
Features
Extra Long Life: our batteries are designed with high quality grid alloy enables
the grid with features of anti-corrosion, low gas emission and excellent deep
cycle performance, as well as high density and special deep cycle lead paste
prescription is adopted to ensure extra long cycle life.
High Reliability and Safety: High strength ABS battery container and lid, perfect
safety valve design, and high strength & excellent large current
electroconductivity copper terminal design are adopted to ensure the batteries
with high reliability and safety at extreme condition.
High Environmental Adaptability: our batteries adopts special fumed silica Gel
in electrolyte and special Gel type separator to prevent electrolyte sratification.
This can significantly improve the battery's service life and environmental
adptability.
Non-Cadmium Design, Environment-friendly: our batteries have adopted
internationally leading technology - container formation non-cadmium
production technology, which is in the leading position in the industry. It helps to
save energy 28.5%, save water 90%, and non-discharge of waste water.
Construction
Positive plate – Thick high Sn low Ca grid with high density paste
Negative plate – Over designed capacity to overcome sulphation at low SOC
Separator – Advanced AGM separator
Electrolyte – Dilute high purity sulphuric acid with nano gel
Battery container and cover – ABS
Pillar seal – 100% factory tested, proven two layers epoxy resin seal
Relief valve – Complete with integrated flame arrestor
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.