6V1.2AH CB612 SLA Black ABS Plastic Lead Acid Regulated Battery

Description

Sealed Construction

The unique construction and sealing techniques of the battery guarantee leak

proof operation in any position with no adverse effect to capacity or service life.

Electrolyte Suspension System

All batteries utilize an electrolyte suspension system consisting of a high

porosity, glass fiber material which in conjunction with plates, totally absorb and

contain the electrolyte.

Gas Recombination

CGB batteries incorporate a built-in design that controls gas generation and

induces recombination of more than 99% of gases generated during float or

cyclic usage.

Maintenance Free Operation

There is no need to check specific gravity of the electrolyte or add water to

batteries during float service life. In fact, there is no provision for this type of

maintenance.

Specifications

Applications:

UPS & EPS system

Telecommunication

Banks & Financial Centre

Hospital& Testing Laboratories

Emergency Power Systerm

Alarm & Security system

High Power Backup Supply

 Features

Sealed Construction

The unique construction and sealing techniques of the battery guarantee leak

proof operation in any position with no adverse effect to capacity or service life.

Electrolyte Suspension System

All batteries utilize an electrolyte suspension system consisting of a high

porosity, glass fiber material which in conjunction with plates, totally absorb and

contain the electrolyte.

Gas Recombination

CGB batteries incorporate a built-in design that controls gas generation and

induces recombination of more than 99% of gases generated during float or

cyclic usage.

Maintenance Free Operation

Due to the perfectly sealed construction and the recombination of gasses within

the cells, the battery is almost maintenance free.

Low Pressure Valve Regulated System..

All batteries are equipped with safety release valves, designed to operate

between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence, there is

never an excessive accumulation of gas within the battery.

Heavy Duty Grids

Heavy duty lead calcium tin alloy grids provide an extra margin of performance

and service life in either float or cyclic applications.

Cyclic Service Life

More than 600 discharge/recharge cycles can be realized from CGB CB and HR

batteries, dependent on the average depth of discharge.

Float Service Life

SE and CB, HR Series batteries have an expected life span of 3 to 5 years in

float service applications.

Self Discharge - Shelf Life

The self discharge rate at room temperature is approximately 3% of rated

capacity per month.

Operating Temperature

CGB Batteries may be operated over a broad range of ambient temperatures.

Deep Discharge Recovery

The batteries recover their capacities even after repeated deep discharges.

Storage

Batteries should be stored in dry and clean warehouse which has good air

exchange system. Batteries should avoid direct sunlight. Batteries should not

be near to heat (such as radiator, the distance should more than 1m). Batteries

should avoid any toxic gas and organic solvent.

When the ambient temperature is less than 25℃, the longest storage life is 6

months. If ambient temperature is higher, the longest storage life varies as

specified in below chart.