6V 7Ah maintenance free Rechargeable Lead Acid Battery sealed for Emergency Alarm System
6V 7Ah maintenance free Rechargeable Lead Acid Battery sealed for Emergency Alarm System
Description
Sealed Construction
The unique construction and sealing techniques of the battery guarantee leak
proof operation in any position with no adverse effect to capacity or service life.
Electrolyte Suspension System
All batteries utilize an electrolyte suspension system consisting of a high
porosity, glass fiber material which in conjunction with plates, totally absorb and
contain the electrolyte.
Gas Recombination
CGB batteries incorporate a built-in design that controls gas generation and
induces recombination of more than 99% of gases generated during float or
cyclic usage.
Maintenance Free Operation
There is no need to check specific gravity of the electrolyte or add water to
batteries during float service life. In fact, there is no provision for this type of
maintenance.
Specifications:
| Nominal Voltage | 6V |
Capacity |
C20 |
4Ah (10.5V, at 25℃) |
|
Nominal Capacity (C20) |
4Ah(10.5V,at 25℃) |
C10 |
3.6Ah (10.5V, at 25℃) |
||
Dimension |
Length 70mm |
C3 |
3Ah (10.5V, at 25℃) |
||
Width 47mm |
C1 |
2.4Ah (10.2V, at 25℃) |
|||
Height 101mm |
Internal Resistance |
Approx. 20mΩ (25℃) |
|||
Total Height 106mm |
Max Short-duration Discharge Current |
120A(25℃) |
|||
Weight |
Approx.0.8kg |
Terminal |
FO-02/FO-03 |
||
Applications:
UPS & EPS system
Telecommunication
Banks & Financial Centre
Hospital& Testing Laboratories
Emergency Power Systerm
Alarm & Security system
High Power Backup Supply
Feature
Designed life for floating charge is 3-5 years (20℃);
Float charging voltage: 13.5V – 13.8V (20℃);
Such as broadband, PVs etc through up-to-date gel technologies.
Wide temperature scope of application (-15~45℃);
Best temperature of application (20±5℃);
No leaking, safe and reliable;
Good deep charge cycle performance;
Good over-discharging recovery performance.
Standing or lying down for using, convenient to transport and install
Our gel batteries uses German origin high purity fumed silica to form sulfuric
acid thixotropic Gel and fills to the batteries with vacuum to ensure the fully
penetration of electrolyte through separators and plates pastes.
Low self-discharge rate.
Charging
| Using Mode | Charging Voltage | Temperature Compensation | Max Charging Current |
| Standby Use | 2.275±0.025V/cell (25℃) | -3.3mV/℃/cell | 2.1A |
| Cyclic Use | 2.45±0.05V/cell (25℃) | -5mV/℃/cell |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.