12V 3.4AH AGM UPS Lead Acid Battery , Alarm System Recharge Ups Battery

 
 
12V 3.4AH AGM UPS Lead Acid Battery , Alarm System Recharge Ups Battery
 
 
 
Description
 
Designed life for floating charge is 3~5 years (20℃);
 
 
AGM valve regulated sealing technology;
 
 
Wide temperature scope of application (-15~45℃);
 
 
Best temperature of application (20±5℃);
 
 
Multipurpose: Float or Cyclic use
 
 
High strength ABS material for container & lid;
 
 
Standing or lying down for using, convenient to transport and install;
 
 
High sealed reaction efficiency, little loss of water, no need to add distilled
 
water or electrolyte, simple to use and maintain;
 
 
Low self-discharge rate.
 
 
 
 
 
Specifications

UPS & EPS System

Telecommunication

Banks & Financial Centre

Hospital& Testing Laboratories

Telecommunication
 
 
 
Feature
 

Sealed Construction

The unique construction and sealing techniques ensure no electrolyte leakage

from case or terminals.

Electrolyte Suspension System

All batteries utilize an electrolyte suspension system consisting of a high

porosity, glass fiber material which in conjunction with plates, totally absorb and

contain the electrolyte.

Gas Recombination

CGB batteries incorporate a built-in design that controls gas generation and

induces recombination of more than 99% of gases generated during float or

cyclic usage.

Maintenance Free Operation

There is no need to check specific gravity of the electrolyte or add water to

batteries during float service life. In fact, there is no provision for this type of

maintenance.

Low Pressure Valve Regulated System..

All batteries are equipped with safety release valves, designed to operate

between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence, there is

never an excessive accumulation of gas within the battery.

Heavy Duty Grids

Heavy duty lead calcium tin alloy grids provide an extra margin of performance

and service life in either float or cyclic applications.

Cyclic Service Life

More than 600 discharge/recharge cycles can be realized from CGB CB and HR

batteries, dependent on the average depth of discharge.

Float Service Life

SE and CB, HR Series batteries have an expected life span of 3 to 5 years in

float service applications.

Self Discharge - Shelf Life

The self discharge rate at room temperature is approximately 3% of rated           

capacity per month.

Operating Temperature

CGB Batteries may be operated over a broad range of ambient temperatures.

Terminals

The batteries are manufactured using a range of terminals which vary in size

and type. Please refer to details as shown

 
 
Notice:
 
Don’t near the hot source and don’t under the sunshine.
 
 
Don’t charge in the sealed container.
 
 
No short circuit. It should be addition charge if you don’t use, and single charge
 
per three months, to avoid irreversible sulfating. The battery should be changed
 
when the battery jar broken or the electrolyte omitted, to avoid acid corrosion.
 
 
Don’t store in the space of acid gas.
 
 
You should be careful and regular check when use the battery. To avoid the
 
battery don’t work. You should change the battery if the capacity is not full or has
 
been damage, especially after one year using.
 
 
Don’t put the battery in the fire, or it will explode.
 
 
Please use cotton cloth to clean, if the battery is broken down and leak
 
electrolyte. Please wash your skin when touch the electrolyte.
 
 
Don’t clean the battery by using the organic solution. (e.g. petrol)
 
ging time: 15~20h; Temperature compensation coefficient: -5mV/℃/cell.